iar

WinAms支持芯片列表

由 [亡魂溺海] 提交于 2019-11-27 01:34:57
MPU Maker MPU Type Simulator Engine Type Latest Simulator Version Cross Compiler Support Status Altera Nios System-G sxgnt2 V1.01 GNU OK ARM ARM Cortex-A5 ARM Cortex-A7 ARM Cortex-A8 ARM Cortex-A9 ARM Cortex-A12 ARM Cortex-A15 System-G sxgat8 V1.05 ARM / GNU / GreenHills / IAR / TI OK ARM Cortex-A53(AArch32) ARM Cortex-A57(AArch32) SX hsnatc V1.03.1 ARM / GreenHills OK ARM Cortex-A53(AArch64) ARM Cortex-A57(AArch64) SX hsnaqc V1.03.1 ARM / GreenHills OK ARM Cortex-M0 ARM Cortex-M0+ ARM Cortex-M1 System-G sxgata V1.05.1 ARM / GNU / GreenHills / IAR / TI OK ARM Cortex-M3 System-G sxgat6 V1.13

Command Prompt Error 'C:\Program' is not recognized as an internal or external command, operable program or batch file

由 狂风中的少年 提交于 2019-11-26 14:04:15
问题 I am trying to run the following batch command. The command has been extracted from the IDE so is confirmed working. Getting the error mentioned below. I have tried a few variations with double quotes but they haven't worked. Even on powershell it has the same message. C:\Program Files\IAR Systems\Embedded Workbench 7.0\430\bin\icc430.exe F:\CP001\source\Meter\Main.c -D Hardware_P20E -D Calibration_code -D _Optical -D _Configuration_TS0382 -o F:\CP001\Temp\C20EO\Obj\ --no_cse --no_unroll --no

IAR编译错误Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment definition. At least 0x8 more bytes needed. The problem occurred while processing the segment

由 非 Y 不嫁゛ 提交于 2019-11-26 12:07:59
问题：个人使用的是IARV9.10编译CC2541的工程，没有做任何修改，直接编译出现如下错误 Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment definition. At least 0x8 more bytes needed. The problem occurred while processing the segment 出现问题后经过百度查找，导致这个错误的原因是编译器配置问题，解决办法如下： 依次打开Project -> Options -> General Option -> Target，在Target标签中找到“Number of virtual”，原来默认为16，修改为8。 修改完之后点OK，再次编译之前的错误已经没有了。 到此问题解决！ 来源： https://www.cnblogs.com/dingliping/p/11319031.html
订阅 iar