安装etcd集群

kuberntes 系统使用 etcd 存储所有数据，是最重要的组件之一，注意 etcd集群只能有奇数个节点(1,3,5...)，本文档使用3个节点做集群。

etcd下载地址：https://github.com/coreos/etcd/releases

{   "CN": "etcd",   "hosts": [     "127.0.0.1",     "192.168.1.11",     "192.168.1.12",     "192.168.1.13",     "etcd1",     "etcd2",     "etcd3"   ],   "key": {     "algo": "rsa",     "size": 2048   },   "names": [     {       "C": "CN",       "ST": "BeiJing",       "L": "BeiJing",       "O": "Ctyun",       "OU": "ops"     }   ] }

hosts：定授权使用该证书的 etcd 节点 IP(应包含集群内所有节点的IP与hostname)
C：国家
ST：省份
L：城市
O：公司
OU：部门

CA证书在前面的章节创建 Kubernetes证书相关(CFSSL)

cfssl gencert -ca=/opt/ssl/k8sca/ca.pem \ -ca-key=/opt/ssl/k8sca/ca-key.pem \ -config=/opt/ssl/k8sca/ca-config.json \ -profile=kubernetes /opt/ssl/etcd/etcd-csr.json | cfssljson -bare etcd

-ca：指定CA证书路径
-ca-key：指定CAKey的路径
-config：指定CA证书签署策略配置文件

创建etcd配置文件etcd.conf，此配置文件是定义一些变量，方便etcd.service文件中直接引用、方便后期维护。
配置文件的所有含义都在创建etcd.service配置文件后有详解。

mkdir -p /etc/etcd vim /etc/etcd/etcd.conf # [member] ETCD_NAME=etcd1 ETCD_DATA_DIR="/var/lib/etcd" ETCD_LISTEN_PEER_URLS="https://192.168.1.11:2380"  ETCD_LISTEN_CLIENT_URLS="https://192.168.1.11:2379" #[cluster] ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.1.11:2380" ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster" ETCD_ADVERTISE_CLIENT_URLS="https://192.168.1.11:2379"

etcd.service的变量都是引用etcd配置文件中

mkdir /var/lib/etcd vim /usr/lib/systemd/system/etcd.service  [Unit] Description=Etcd Server After=network.target After=network-online.target Wants=network-online.target Documentation=https://github.com/coreos  [Service] Type=notify WorkingDirectory=${ETCD_DATA_DIR}  EnvironmentFile=/etc/etcd/etcd.conf ExecStart=/usr/local/bin/etcd \   --name=etcd1 \   --cert-file=/opt/ssl/etcd/etcd.pem \   --key-file=/opt/ssl/etcd/etcd-key.pem \   --peer-cert-file=/opt/ssl/etcd/etcd.pem \   --peer-key-file=/opt/ssl/etcd/etcd-key.pem \   --trusted-ca-file=/opt/ssl/k8sca/ca.pem \   --peer-trusted-ca-file=/opt/ssl/k8sca/ca.pem \   --initial-advertise-peer-urls=${ETCD_INITIAL_ADVERTISE_PEER_URLS} \   --listen-peer-urls=${ETCD_LISTEN_PEER_URLS} \   --listen-client-urls=${ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 \   --advertise-client-urls=${ETCD_ADVERTISE_CLIENT_URLS} \   --initial-cluster-token=${ETCD_INITIAL_CLUSTER_TOKEN} \   --initial-cluster etcd1=https://192.168.1.11:2380,etcd2=https://192.168.1.12:2380,etcd3=https://192.168.1.13:2380 \   --initial-cluster-state=new \   --data-dir=/var/lib/etcd Restart=on-failure RestartSec=5 LimitNOFILE=65536  [Install] WantedBy=multi-user.target

--initial-cluster：集群当中的其他节点
--cert-file：etcd证书路径
--key-file：etcd私钥路径
--peer-cert-file：对等证书(双向证书)路径
--peer-key-file：对等证书(双向证书)私钥路径
--trusted-ca-file：作为客户端时的CA证书路径
--peer-trusted-ca-file：对等证书的CA证书路径
--initial-advertise-peer-urls：列出集群成员通信的URL，用于通告集群其他成员
--listen-peer-urls：用于监听集群其他成员的URL列表
--listen-client-urls：用于监听客户端通讯的URL列表
--advertise-client-urls：通告客户端的URL，用于列出所有客户端
--initial-cluster-token：etcd集群的初始集群令牌，服务器必须通过令牌才能加入etcd集群

集群所有节点都配置好配置文件，同时启动。

systemctl daemon-reload && systemctl enable etcd && systemctl start etcd

前面分别创建了/etc/etcd/etcd.conf与/var/lib/systemd/system/etcd.service两个配置文件，且etcd.service引用了etcd.conf重定义的变量。

如若不想引用变量，可以不写etcd.conf。仅创建etcd.service如下

[root@etcd1 k8sca]# cat /usr/lib/systemd/system/etcd.service [Unit] Description=Etcd Server After=network.target After=network-online.target Wants=network-online.target Documentation=https://github.com/coreos  [Service] Type=notify WorkingDirectory=/var/lib/etcd/ ExecStart=/usr/local/bin/etcd \   --name etcd1 \   --cert-file=/opt/ssl/etcd/etcd.pem \   --key-file=/opt/ssl/etcd/etcd-key.pem \   --peer-cert-file=/opt/ssl/etcd/etcd.pem \   --peer-key-file=/opt/ssl/etcd/etcd-key.pem \   --trusted-ca-file=/opt/ssl/k8sca/ca.pem \   --peer-trusted-ca-file=/opt/ssl/k8sca/ca.pem \   --initial-advertise-peer-urls=https://192.168.1.11:2380 \   --listen-peer-urls=https://192.168.1.11:2380 \   --listen-client-urls=https://192.168.1.11:2379,http://127.0.0.1:2379 \   --advertise-client-urls=https://192.168.1.11:2379 \   --initial-cluster-token=etcd-cluster-0 \   --initial-cluster etcd1=https://192.168.1.11:2380,etcd2=https://192.168.1.12:2380,etcd3=https://192.168.1.13:2380 \   --initial-cluster-state=new \   --data-dir=/var/lib/etcd Restart=on-failure RestartSec=5 LimitNOFILE=65536  [Install] WantedBy=multi-user.target 

集群中所有主机配置均一致，仅IP地址不同。

$ etcdctl --ca-file=/opt/ssl/k8sca/ca.pem --cert-file=/opt/ssl/etcd/etcd.pem --key-file=/opt/ssl/etcd/etcd-key.pem cluster-health member aa869cb0f2e7ed31 is healthy: got healthy result from https://192.168.1.11:2379 member b08a644fd7247c5e is healthy: got healthy result from https://192.168.1.13:2379 member bb9bd2baaebf7d95 is healthy: got healthy result from https://192.168.1.12:2379 

• publish error: etcdserver: request timed out
  我部署时先使用一台进行测试，无论如何启动etcd都无法启动，提示publish error: etcdserver: request timed out。后来发现etcd.service中制定了其他etcd主机，所以当单独启动一台是连接其他主机不通，那么etcd就启动失败。所以要把etcd集群中所有主机都配置好，同时启动就OK了。

http://blog.51cto.com/sgk2011/2108542
https://github.com/gjmzj/kubeasz/blob/master/docs/setup/02-install_etcd.md
https://blog.csdn.net/qq_33199919/article/details/80623055
https://skyao.gitbooks.io/learning-etcd3/content/

文章来源: 安装etcd集群