问题
Consider this simplified view of some code with which I'm working:
@Stateless(...)
@Remote(...)
@TransactionAttribute(TransactionAttributeType.MANDATORY)
public class FirstEjbType {
@EJB(...)
private SecondEjbType secondEjb;
@EJB(...)
private ThirdEjbType thirdEjb;
public void doSomething() {
secondEjb.doSomething(); // WRITES SOMETHING TO THE DATABASE
thirdEjb.doSomething(); // CAN'T SEE THAT SOMETHING IN THE DATABASE!
}
I've set the TransactionAttribute annotation to MANDATORY at the class-level. I understand this to mean that all methods such as doSomething() must be invoked within a supplied transaction. We are using container-managed transactions in this case.
The TransactionAttribute is not used at all in SecondEjbType or ThirdEjbType... neither at the class nor method level. I understand this to mean that secondEjb.doSomething() and thirdEjb.doSomething() will both operate within the transaction supplied for firstEjb.doSomething().
However, I'm seriously missing out on something! As indicated by the code comments... secondEjb writes data to a database, and thirdEjb reads that data as part of its operation. Since all of this is running within the same transaction, I would not expect there to be any issues with isolation levels. However, for whatever reason the secondEjb database write isn't visible to thirdEjb.
I've turned tracing all the way up to the max, and there's apparently not an exception or error or rollback at issue... the initial write simply isn't visible to the subsequent read. I don't claim to be the world's greatest guru in transaction management... have I missed something obvious, or is my conceptual understanding basically correct and the issue may lie elsewhere?
UPDATE - Additional information requested by johnstok below:
- I am running in GlassFish
- I'm not sure what you mean by "non-standard flush mode", so I assume the answer is no.
- My persistence.xml file looks like this:
<persistence xmlns="http://java.sun.com/xml/ns/persistence" version="1.0">
<persistence-unit name="pu" transaction-type="JTA">
<jta-data-source>jdbc/datasource</jta-data-source>
<exclude-unlisted-classes>false</exclude-unlisted-classes>
<properties>
<property name="toplink.cache.shared.default" value="false"/>
</properties>
</persistence-unit></persistence>
回答1:
First thing to check is that bean two and three use @PersistenceContext EntityManager to get the EntityManager and not @PersistenceUnit EntityManagerFactory followed by a createEntityManager() call.
Second, check that the DataSource is actually setup to participate in JTA transactions (autoCommit or related properties should be off).
Lastly, a quick and dirty way to check your propagation is to call the EntityManager.getDelegate() method and check the resulting object is the same throughout the expected transaction scope.
Here's how things work under the covers.... The EntityManager injected into your bean when it is created is a fake, a simple facade. When you attempt to use the EntityManager reference in a transaction, the container will actually go digging in the current transaction, find the real EntityManager that is stashed in the transaction scope and delegate your call to that EntityManager (if there is no EntityManager already in the transaction, the container will create one and add it). This real object will be the value of getDelegate(). If the value of getDelegate() is not the same (==) in secondEjb.doSomething() and in thirdEjb.doSomething() then you are not getting the expected propagation and each is talking to a different persistence context.
On a side note, beware that applying MANDATORY on the class actually only affects methods defined in that exact class, not in super classes. If you do not specify an @TransactionAttribute on a super class, those methods use the default regardless of how subclasses maybe annotated. I only mention that as it may have an impact on your understanding of your code.
回答2:
I've set the TransactionAttribute annotation to MANDATORY at the class-level. I understand this to mean that all methods such as doSomething() must be invoked within a supplied transaction. We are using container-managed transactions in this case.
Using MANDATORY at the class level means that the container should throw an exception to the caller if there is no transaction in progress when any method of FirstEjbType is called.
Out of curiosity, who is initiating the transaction then? Is there a particular reason to not use the default REQUIRED?
The TransactionAttribute is not used at all in SecondEjbType or ThirdEjbType... neither at the class nor method level. I understand this to mean that secondEjb.doSomething() and thirdEjb.doSomething() will both operate within the transaction supplied for firstEjb.doSomething()
This means that the default transaction attribute is used, i.e. REQUIRED, and a REQUIRED method is guaranteed to be executed within a transaction (the container would start one if required).
So in your case, secondEjb.doSomething() and thirdEjb.doSomething() should be indeed executed within the transaction of firstEjb.doSomething().
have I missed something obvious, or is my conceptual understanding basically correct and the issue may lie elsewhere?
The rule of thumb for (transaction-scoped) persistence context propagation is that the persistence context propagates as the JTA transaction propagates. But there are some restrictions. The JPA specification puts it like this:
5.6.3 Persistence Context Propagation
As described in section 5.1, a single persistence context may correspond to one or more JTA entity manager instances (all associated with the same entity manager factory).
The persistence context is propagated across the entity manager instances as the JTA transaction is propagated.
Propagation of persistence contexts only applies within a local environment. Persistence contexts are not propagated to remote tiers.
And Sahoo (from the GlassFish team) writes more explicitly about the propagation rules in Persistence Context propagation:
3. (rule #3) Don't expect PC to be propagated when you call a remote EJB even when the remote EJB happens to be running in the same JVM or part of the same application.
So, assuming you're using JPA everywhere, I would expect business methods called within the same transaction to inherit the same persistence context only if you aren't using Remote interfaces (I don't know if this is a GlassFish specific interpretation of the spec but Sahoo is pretty clear about this restriction).
PS: JPA assumes a READ_COMMITTED isolation level (so optimistic locking can work) and standard JPA does not allow custom settings of isolation levels (well, some providers do allow to change it either globally or per request but that's non portable).
PPS: I'm not convinced isolation levels are the key to your problem here.
References
- JPA 1.0 Specification
- Section 5.6.3 "Persistence Context Propagation"
回答3:
Since jpa is mentioned in the tags, I guess that persistence context is not flushed before calling thirdEjb methods, so changes are not written to the database.
By default, JPA persistence context is flushed before commit, before execution of a JPA query or manually with em.flush(). So, visibility of changes depends on the data access method used in thirdEjb - if data are read, for example, using JDBC, changes shouldn't be visible without em.flush().
回答4:
You'll need to provide more information to get this question answered.
- Are you running in a Java EE container?
- Have you set a non-standard flush mode?
- Can you post your persistence.xml file?
Be aware that 'persistence context' and transaction lifecycle may not be the same.
Transactions
Per EJB 3.0 the default transaction attribute for all EJB 3.0 applications is REQUIRED. The doc's for transaction type are here: http://download.oracle.com/javaee/6/api/javax/ejb/TransactionAttributeType.html
Are you perhaps using the REQUIRES_NEW transaction type which will operate in a separate transaction?
In particular, try using a local rather than remote interface for the 2nd and 3rd EJBs.
Flushing
With default settings a flush is forced before a query (if needed) to ensure results are correct: http://download.oracle.com/javaee/5/api/javax/persistence/FlushModeType.html
Try calling entityManager.setFlushMode(FlushModeType.AUTO); to make sure a flush happens before your query. Enable SQL logging in your JPA provider to be sure that the updates / inserts are really being sent to the DB prior to the select.
回答5:
I've learned a ton from all the answers here, and can't thank people enough. However, I believe that my question has muddied the waters to a point where it might be better to start over with a different question.
It doesn't appear that jumping from one EJB to the next and back has anything to do with anything. To simplify matters, I tried working with a test case completely isolated to one EJB. I went into that secondEjb.doSomething() method, which persists an entity to the database. At the end of the method, I added an em.flush(), and tried retrieving the entity again with a JPA query.
Even though I was still in the exact same method where the entity had just been persisted, it was not visible to that subsequent query. I've done some additional research elsewhere, and it looks like this may simply be the normal mode of isolation for JPA in a transactional context. One a transaction is started, additional queries within that transaction don't yet have visibility to uncommitted data.
If my summary of the linked CodeRanch discussion is accurate, then "yuck" on JPA! :) Either way, I've refactored the code to avoid this issue altogether.
来源：https://stackoverflow.com/questions/4136852/understanding-ejb3-jpa-container-level-transactions-and-isolation-level