iPhone: How to get current milliseconds?

Question

What is the best way to get the current system time milliseconds?

Answer 1

[[NSDate date] timeIntervalSince1970];

It returns the number of seconds since epoch as a double. I'm almost sure you can access the milliseconds from the fractional part.

Answer 2

If you're looking at using this for relative timing (for example for games or animation) I'd rather use CACurrentMediaTime()

double CurrentTime = CACurrentMediaTime();

Which is the recommended way; NSDate draws from the networked synch-clock and will occasionally hiccup when re-synching it against the network.

It returns the current absolute time, in seconds.

---

If you want only the decimal part (often used when syncing animations),

let ct = CACurrentMediaTime().truncatingRemainder(dividingBy: 1)

Answer 3

I benchmarked all the other answers on an iPhone 4S and iPad 3 (release builds). CACurrentMediaTime has the least overhead by a small margin. timeIntervalSince1970 is far slower than the others, probably due to NSDate instantiation overhead, though it may not matter for many use cases.

I'd recommend CACurrentMediaTime if you want the least overhead and don't mind adding the Quartz Framework dependency. Or gettimeofday if portability is a priority for you.

iPhone 4S

CACurrentMediaTime: 1.33 µs/call
gettimeofday: 1.38 µs/call
[NSDate timeIntervalSinceReferenceDate]: 1.45 µs/call
CFAbsoluteTimeGetCurrent: 1.48 µs/call
[[NSDate date] timeIntervalSince1970]: 4.93 µs/call

iPad 3

CACurrentMediaTime: 1.25 µs/call
gettimeofday: 1.33 µs/call
CFAbsoluteTimeGetCurrent: 1.34 µs/call
[NSDate timeIntervalSinceReferenceDate]: 1.37 µs/call
[[NSDate date] timeIntervalSince1970]: 3.47 µs/call

Answer 4

In Swift we can make a function and do as follows

func getCurrentMillis()->Int64{
    return  Int64(NSDate().timeIntervalSince1970 * 1000)
}

var currentTime = getCurrentMillis()

Though its working fine in Swift 3.0 but we can modify and use the Date class instead of NSDate in 3.0

Swift 3.0

func getCurrentMillis()->Int64 {
    return Int64(Date().timeIntervalSince1970 * 1000)
}

var currentTime = getCurrentMillis()

Answer 5

So far I found gettimeofday a good solution on iOS (iPad), when you want to perform some interval evaluation (say, framerate, timing of a rendering frame...) :

#include <sys/time.h>
struct timeval time;
gettimeofday(&time, NULL);
long millis = (time.tv_sec * 1000) + (time.tv_usec / 1000);

Answer 6

Swift 2

let seconds = NSDate().timeIntervalSince1970
let milliseconds = seconds * 1000.0

Swift 3

let currentTimeInMiliseconds = Date().timeIntervalSince1970.milliseconds

Answer 7

To get milliseconds for current date.

Swift 4:

func currentTimeInMilliSeconds()-> Int
    {
        let currentDate = Date()
        let since1970 = currentDate.timeIntervalSince1970
        return Int(since1970 * 1000)
    }

Answer 8

It may be useful to know about CodeTimestamps, which provide a wrapper around mach-based timing functions. This gives you nanosecond-resolution timing data - 1000000x more precise than milliseconds. Yes, a million times more precise. (The prefixes are milli, micro, nano, each 1000x more precise than the last.) Even if you don't need CodeTimestamps, check out the code (it's open source) to see how they use mach to get the timing data. This would be useful when you need more precision and want a faster method call than the NSDate approach.

http://eng.pulse.me/line-by-line-speed-analysis-for-ios-apps/

Answer 9

// Timestamp after converting to milliseconds.

NSString * timeInMS = [NSString stringWithFormat:@"%lld", [@(floor([date timeIntervalSince1970] * 1000)) longLongValue]];

Answer 10

I needed a NSNumber object containing the exact result of [[NSDate date] timeIntervalSince1970]. Since this function was called many times and I didn't really need to create an NSDate object, performance was not great.

So to get the format that the original function was giving me, try this:

#include <sys/time.h>
struct timeval tv;
gettimeofday(&tv,NULL);
double perciseTimeStamp = tv.tv_sec + tv.tv_usec * 0.000001;

Which should give you the exact same result as [[NSDate date] timeIntervalSince1970]

Answer 11

CFAbsoluteTimeGetCurrent()

Absolute time is measured in seconds relative to the absolute reference date of Jan 1 2001 00:00:00 GMT. A positive value represents a date after the reference date, a negative value represents a date before it. For example, the absolute time -32940326 is equivalent to December 16th, 1999 at 17:54:34. Repeated calls to this function do not guarantee monotonically increasing results. The system time may decrease due to synchronization with external time references or due to an explicit user change of the clock.

Answer 12

Try this :

NSDate * timestamp = [NSDate dateWithTimeIntervalSince1970:[[NSDate date] timeIntervalSince1970]];

NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init];
[dateFormatter setDateFormat:@"YYYY-MM-dd HH:mm:ss.SSS"];

NSString *newDateString = [dateFormatter stringFromDate:timestamp];
timestamp = (NSDate*)newDateString;

In this example, dateWithTimeIntervalSince1970 is used in combination of the formatter @"YYYY-MM-dd HH:mm:ss.SSS" that will return the date with year, month, day and the time with hours, minutes, seconds, and milliseconds. See the example : "2015-12-02 04:43:15.008". I used the NSString to be sure that the format will be has written before.

Answer 13

This is basically the same answer as posted by @TristanLorach, just recoded for Swift 3:

   /// Method to get Unix-style time (Java variant), i.e., time since 1970 in milliseconds. This 
   /// copied from here: http://stackoverflow.com/a/24655601/253938 and here:
   /// http://stackoverflow.com/a/7885923/253938
   /// (This should give good performance according to this: 
   ///  http://stackoverflow.com/a/12020300/253938 )
   ///
   /// Note that it is possible that multiple calls to this method and computing the difference may 
   /// occasionally give problematic results, like an apparently negative interval or a major jump 
   /// forward in time. This is because system time occasionally gets updated due to synchronization 
   /// with a time source on the network (maybe "leap second"), or user setting the clock.
   public static func currentTimeMillis() -> Int64 {
      var darwinTime : timeval = timeval(tv_sec: 0, tv_usec: 0)
      gettimeofday(&darwinTime, nil)
      return (Int64(darwinTime.tv_sec) * 1000) + Int64(darwinTime.tv_usec / 1000)
   }

Answer 14

 func currentmicrotimeTimeMillis() -> Int64{
let nowDoublevaluseis = NSDate().timeIntervalSince1970
return Int64(nowDoublevaluseis*1000)

}

Answer 15

This is what I used for Swift

var date = NSDate()
let currentTime = Int64(date.timeIntervalSince1970 * 1000)

print("Time in milliseconds is \(currentTime)")

used this site to verify accuracy http://currentmillis.com/

Answer 16

[NSDate timeIntervalSinceReferenceDate] is another option, if you don't want to include the Quartz framework. It returns a double, representing seconds.

Answer 17

NSTimeInterval time = ([[NSDate date] timeIntervalSince1970]); //double
long digits = (long)time; //first 10 digits        
int decimalDigits = (int)(fmod(time, 1) * 1000); //3 missing digits
/*** long ***/
long timestamp = (digits * 1000) + decimalDigits;
/*** string ***/
NSString *timestampString = [NSString stringWithFormat:@"%ld%03d",digits ,decimalDigits];

Answer 18

let timeInMiliSecDate = Date()
let timeInMiliSec = Int (timeInMiliSecDate.timeIntervalSince1970 * 1000)
print(timeInMiliSec)