vbox | 易学教程

在Fedora里安装XP双系统

阅读更多关于在Fedora里安装XP双系统

长话短说。。。准备工具：Fedora 16 ，Vbox 虚拟机， GParted 分区软件，XP Ghost镜像文件补充：最好还准备个离线版的驱动精灵借助Vbox 挂载真实硬盘分区的特性用GParted 分区软件分出两个ntfs或者fat32的分区 sudo chmod 666 /dev/sdaX 注意：X 是刚刚你的分区 sudo vboxmanage internalcommands createrawvmdk -filename /home/[YOURHOME]/xp.vmdk -rawdisk /dev/sda -partitions X -relative sudo chmod 755 xp.vmdk sudo chmod 755 xp-pt.vmdk sudo chown 当前用户名 xp.vmdk sudo chown 当前用户名 xp-pt.vmdk 添加当前用户到disk组 gpasswd disk -a 当前用户名用Vbox 创建一个新的xp虚拟机，虚拟硬盘就使用刚刚创建的 xp.vmdk(只选它就行了) 启动xp虚拟机，分配光驱 XP Ghost镜像文件（如果你动作不够快，可能需要再次启动xp虚拟机）启动Ghost 还原或者 WINPE 系统里的Ghost 接下来，就不用说了吧。。。（注意：/dev/sdaX的顺序

vbox虚拟机复制&&虚拟机指定静态IP

阅读更多关于 vbox虚拟机复制&&虚拟机指定静态IP

转自：cnblogs.com/qq917937712/p/11032058.html PS：执行一下步骤前先配置vBox上虚拟机的网络连接方式。一、复制镜像（假设源镜像已经用桥接方式，可以访问互联网）。注意需要重新生成mac地址二、复制完成，启动复制好的镜像（注意，此时的镜像无法联网） vi /etc/udev/rules.d/70-persistent-net.rules 删除eth0，讲eth1改成eth0。记住新的mac地址三、修改ifcfg-eth0文件 vi /etc/sysconfig/network-scripts/ifcfg-eth0 假设原始内容如下：则修改后内容应该如下: 四、重启服务。至此，复制出来的虚拟机就可以访问互联网了 ps:如果无法访问网络 service network restart //如果不行，那就reboot吧五、复制的虚拟机可能和源虚拟机IP地址一样。所以接下来，是固定虚拟机的IP地址 //查看文件，记住这个IP地址 cat /etc/resolv.conf vi /etc/sysconfig/network-scripts/ifcfg-eth0 BOOTPROTO=static IPADDR=192.168.43.88 NETMASK=255.255.255.0 GATEWAY=192.168.43.1 六

xshell vbox centos NAT方式链接虚拟机

阅读更多关于 xshell vbox centos NAT方式链接虚拟机

一、软件信息宿主操作系统：win10 家庭版虚拟机： virtual 6.0.12 虚拟机：centos7 连接工具：xshell 6 二、网络配置信息虚拟交换器ip ，图中编号为1 图中编号为2 ip配置 contos ip地址信息 /etc/sysconfig/network-scripts/ifcfg-enp0s3 网络配置信息如下 TYPE="Ethernet" PROXY_METHOD="none" BROWSER_ONLY="no" BOOTPROTO="dhcp" DEFROUTE="yes" IPV4_FAILURE_FATAL="no" IPV6INIT="yes" IPV6_AUTOCONF="yes" IPV6_DEFROUTE="yes" IPV6_FAILURE_FATAL="no" IPV6_ADDR_GEN_MODE="stable-privacy" NAME="enp0s3" UUID="7e9c4737-d964-4028-92f3-498501f01dc0" DEVICE="enp0s3" ONBOOT="yes" IPV6_PRIVACY="no" 三、设置端口转发（这步很重要）接上面端口转发，新增转发规则四、配置xshell连接连接成功：参考资料：坨之歌 : xshell链接vbox 上 nat 方式链接虚拟机 - 端口转发

I am trying to understand gridpane and how to use it with combobox, and VBox/HBox

阅读更多关于 I am trying to understand gridpane and how to use it with combobox, and VBox/HBox

问题 I have a more simpler program that just shows the name and the address. I am playing around with place in the gridpane to put these things. Eventually, I would like a combobox , and a clockAnimation in the gridpane. I really don't know how to use HBox/VBox within gridpane, and if I can use them and label and text together. What I am trying to do is put a combo box in the middle of the gridpane, and a clock on the right. I would like to use the the gridpane, and HBox and VBox. I just don't

Adding Node's animated to a VBox

阅读更多关于 Adding Node's animated to a VBox

问题 I am looking for a solution to add node's with fade-in or flipping or any animation. Thanks for any help. I found the same question but without any further help here: Animated component adding-delete in a VBox 回答1: As jewelsea already mentioned, you would use Transitions. Here is an example of how to do it for your use case : public static void addFadingIn(final Node node, final Group parent) { final FadeTransition transition = new FadeTransition(Duration.millis(250), node); transition

alsa_aplay not recording on android

阅读更多关于 alsa_aplay not recording on android

问题 I have just started working on android and I am trying to understand how android audio sub-system (alsa) works. I am running an android image in virtual-box running on windows-7 (64 bit). I was fiddling with alsa-utils to record sound. I tried alsa_aplay -C -f S16_LE -c 2 -r 44100 -d 5 foo.wav it said something like: Recording WAVE foo.wav : Signed 16 bit little endian, rate 44100, stereo However, the output file created appears to be blank (after the wav file header). od -x foo.wav 0000000

Aligning Nodes to the right side of a Vbox in javafx

阅读更多关于 Aligning Nodes to the right side of a Vbox in javafx

问题 I'm trying to make a chatBox with javafx, and I want the messages from the client to be aligned to right and the rest to left. I'm using a Vbox , wrapped in a Scrollpane and in that Vbox, each message is wrapped in another Vbox. But aligning the inner Vbox doesn't work. Here is my code: private VBox addMsg(String senderName, String text, String time) { Label snderName = new Label(senderName + ":"); snderName.setId("senderName"); snderName.setMaxWidth(400); snderName.setAlignment(Pos.BASELINE

Aligning Nodes to the right side of a Vbox in javafx

阅读更多关于 Aligning Nodes to the right side of a Vbox in javafx

How to get Flex components to fill available space using Actionscript

阅读更多关于 How to get Flex components to fill available space using Actionscript

问题 I was laying out my Flex components using mxml and had them working correctly. But then I wanted to switch them over to Actionscript because I wanted them to extend a base component that provides default functionality. I've go the code working except that my components that used to fill the entire space using width="100%" and height="100%" appear to display just using the default sizes. Do you know How I can get them to take up the entire space again? Here is a test component I am playing

Animated component adding-delete in a VBox

阅读更多关于 Animated component adding-delete in a VBox

问题 Is there a way to make the elements of a VBox smoothly move to their new positions when a new element is inserted or removed? I actually need only to make them move smoothly when I remove an element. Thank you for your answers! 回答1: Not without extending VBox and adding your own code to do so by overriding the addChild and removeChild functions. 来源： https://stackoverflow.com/questions/5404379/animated-component-adding-delete-in-a-vbox