LoopBack

ActiveMQ Broker connectible only on Localhost

由 为君一笑 提交于 2019-12-08 07:52:54
问题 Is there a way to run a loopback JMS adapter that will only be detected locally? I'm not sure if my terminology is correct, but I want the ActiveMQ broker to only be connectible from the same machine that the broker is running on. 回答1: Make sure it's connector is only listening on localhost look in the config.xml files and change all 0.0.0.0 adresses to 127.0.0.1 来源： https://stackoverflow.com/questions/3669765/activemq-broker-connectible-only-on-localhost

connecting emulators

由 天大地大妈咪最大 提交于 2019-12-08 04:42:48
问题 I'm trying to create an application in adroid that connects to emulators both of them running on the same machine.And after asking a few questions in here and reading http://developer.android.com/guide/developing/devices/emulator.html#emulatornetworking I have a slightly idea of how to do it,at least that's how I fell,but still need some extra explanations. How is on dev's guide A is the machine B the first emulator working as a server C the second emulator which is considered the client Each

hasMany relation: including from the other direction

由 天涯浪子 提交于 2019-12-08 02:55:41
问题 Say I have the next model: user.json: {//... "relations":{ "invoices": { "type": "hasMany", "model": "Invoice", "foreignKey": "receiverId" }, } //... } A.k.a. a user might have many invoices. This code adds the field receiverId to the invoice model. Now I want to get a list of invoices including their receivers. How can I do that? Invoice.find({include: "reciever"}) Or Invoice.find({include: "user"}) Did not work, returned: "Relation \"receiver\" is not defined for Invoice model" error.

How do I use a remote method in one model to return info from another model?

由 瘦欲@ 提交于 2019-12-07 19:05:00
问题 So I've set up something really simple to learn how to use Loopback. The models are as follows: Person - based on built in User model food_pref typeId (number) personId (number) food_type type (string) Relationships: Person has many food_prefs (foreign key: personId) food_pref belongs to Person (foreign key: personId) food_pref belongs to food_type (foreign key: typeId) An auto-generated method gets created that returns the food_prefs based on the id of the Person. People/{id}/foodPrefs This

loopback angular 404 on refresh page

由 左心房为你撑大大i 提交于 2019-12-07 18:17:20
I have create an application with loopback and angular but i have a problem. When i refresh the browser loopback give me a 404 url not Found. Added base tag to index.html <base href="/"/> Set middlelware.json properly to serve static content: "files": { "loopback#static": { "params": "$!../client" } Set HTML5 mode in angular router (I'm using ui-router) $locationProvider.html5Mode(true); $urlRouterProvider.otherwise('/'); I have yet deleted root.js from the project. What i'm doing wrong? Thanks in advance When you have enabled html5 mode/ push state mode ON in angularjs, this is a common

CentOS 7设置静态IP地址

由 与世无争的帅哥 提交于 2019-12-07 04:13:09
本文将介绍如何在CentOS 7系统下设置静态IP地址 在CentOS 7系统中，默认的网卡名是ens33，配置文件是：/etc/sysconfig/network-scripts/ifcfg-ens33 第一步：使用编辑器对该文件进行编辑 vim /etc/sysconfig/network-scripts/ifcfg-eth0 第二步：在该文件中添加如下内容并保存 BOOTPROTO=static =====此处原为dhcp，改为static ONBOOT=yes =====设置开机加载此配置 IPADDR=192.168.199.254 =====设置静态IP地址 NETMASK=255.255.255.0 =====设置网络子网掩码 GATEWAY=192.168.199.1 =====设置网关 DNS1=192.168.199.1 =====设置DNS 设置完成后总体效果如下： TYPE=Ethernet BOOTPROTO=static DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_FAILURE_FATAL=no IPV6_ADDR_GEN_MODE=stable-privacy NAME=ens33 UUID=cc2a07f2-4dac

003 Linux配置多ip绑定的方法 | ip别名(以CentOS7为例 )

由 你离开我真会死。 提交于 2019-12-07 03:31:34
方式一： 缺点：每一个ip不知道对应那个网络名 1） vi /etc/sysconfig/network-scripts/ifcfg-default # 有可能你的不是： ifcfg-default ，而是/ifcfg-ens3377776，没有你自己随便建一个也行，格式是：ifcfg-xxx 。 将里面内容全部删除，重新改为如下内容： BOOTPROTO=none DEVICE=enp0s17 #要配置的网卡名称 IPADDR=192.168.1.10 #要设置的ip1 PREFIX=24 ##要设置的ip的子网掩码 IPADDR1=10.168.1.10#要设置的ip2 PREFIX1=24 IPADDR2=40.168.1.10#要设置的ip3 PREFIX2=24 IPADDR3=70.168.1.10#要设置的ip4 PREFIX3=24 GATEWAY=192.168.1.1 #默认网关 DNS1=115.181.79.253 #域名解析服务器地址 ONBOOT=yes #开机启动 2）重启网络 service network restart 3）查看结果： ip addr show 效果如下： [root@localhost ~]# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue

CentOS7 修改设置静态IP和DNS

由 泄露秘密 提交于 2019-12-07 03:29:40
用虚拟机装CentOS7，使用的NAT的网络模式，为了防止再次启动系统的时候网络IP发生变化，因此设置静态IP和DNS。 由于CentOS是最小化安装，没有 ifconfig 命令，因此可以采用 ip 命令查看。 查看IP分配情况： # ip addr 发现里边只有一个LOOPBACK的127.0.0.1的回环地址，原来CentOS刚安装后默认是不启动网络连接的。 设置IP和DNS主要在下面的配置文件中修改： # cd /etc/sysconfig/network-scripts/ifcfg-* 由于最小化安装没有vim，所以使用vi。 安装vim 命令： yum install vim -y 具体的配置文件需要到network-scripts目录下看，通常是以 ifcfg- 开头的，比如 ifcfg-eth0 ，我的是 ifcfg-eno33 ，另一个 ifcfg-lo 就是LOOPBACK网络。 # cd /etc/sysconfig/network-scripts/ifcfg-[tab两下] cd /etc/sysconfig/network-scripts/ifcfg-eno33 ifcfg-lo vim /etc/sysconfig/network-scriptsifcfg-eno33 1. 编辑 ifcfg-eno33 ： BOOTPROTO=static

Centos7 下静态IP设置

由 我与影子孤独终老i 提交于 2019-12-07 03:19:28
Centos7 下静态IP设置 1、进入network-scripts目录并且查看该目录下存在的ifcfg-xx文件 cd /etc/sysconfig/network -scripts #xx 为用户自己目录下的ifcfg -xx 文件 vim /etc/sysconfig/network -scripts /ifcfg -xx 2.修改如下配置内容 BOOTPROTO= static #将dncp改为static ONBOOT= "yes" #开机时启用本配置 IPADDR= 192.168 .13 .131 #静态ip GATEWAY= 192.168 .13 .2 #默认网关 NETMASK= 255.255 .255 .0 #子网掩码 DNS1= 192.168 .13 .2 #DNS配置 3.修改后ifcfg-ens33 文件内容如下 TYPE= "Ethernet" DEFROUTE= yes IPV4_FAILURE_FATAL= "no" IPV6INIT= "yes" IPV6_AUTOCONF= "yes" IPV6_DEFROUTE= "yes" IPV6_FAILURE_FATAL= "no" IPV6_ADDR_GEN_MODE= "stable-privacy" NAME= "ens33" UUID= "c40937f7-ebf8-41e8-8541

CentOS7 修改设置静态IP和DNS

由 风格不统一 提交于 2019-12-07 03:14:07
最近因为学习Puppet，用虚拟机装了个CentOS，使用的NAT的网络模式，为了防止再次启动系统的时候网络IP发生变化，因此设置静态IP和DNS。 由于CentOS是最小化安装，没有 ifconfig 命令，因此可以采用 ip 命令查看。 查看IP分配情况： # ip addr 发现里边只有一个LOOPBACK的127.0.0.1的回环地址，原来CentOS刚安装后默认是不启动网络连接的。 设置IP和DNS主要在下面的配置文件中修改： # vi /etc/sysconfig/network-scripts/ifcfg-* 由于最小化安装没有vim，所以使用vi。具体的配置文件需要到network-scripts目录下看，通常是以 ifcfg- 开头的，比如 ifcfg-eth0 ，我的是 ifcfg-eno16777736 ，对于我这种洁癖来说回头非得改了这个乱七八糟的名字，另一个 ifcfg-lo 就是LOOPBACK网络咯。 # vi /etc/sysconfig/network-scripts/ifcfg-[tab两下] ifcfg-eno16777736 ifcfg-lo 1. 编辑 ifcfg-eno16777736 ： BOOTPROTO= static #dhcp改为static（修改） ONBOOT=yes #开机启用本配置，一般在最后一行（修改） IPADDR=
订阅 LoopBack