Can I use IdUDPClient to send M-SEARCH request?

问题

There are few uPNP devices in my network. I am trying to send M-SEARCH request to the network and hope receiving some responses from it. This is what I am trying:

var sIP, sOut: string;
    iPort: Word;
    S: TStringBuilder;
begin
  S := TStringBuilder.Create;
  try
    S.Append('M-SEARCH * HTTP/1.1').AppendLine
     .Append('HOST: 239.255.255.250:1900').AppendLine
     .Append('MAN: "ssdp:discover"').AppendLine
     .Append('MX: 10').AppendLine
     .Append('ST: ssdp:all').AppendLine;

    IdUDPClient1.ReceiveTimeout := 3000;
    IdUDPClient1.Broadcast(S.ToString, 1900, '239.255.255.250');
    sOut := IdUDPClient1.ReceiveString(sIP, iPort);
    Memo1.Lines.Add(sIP);
    Memo1.Lines.Add(IntToStr(iPort));
    Memo1.Lines.Add(sOut);
  finally
    S.Free;
  end;
end;

I receive nothing from the UDP client. I use Wireshark to monitor network traffic and no message was send out from my host.

Any ideas? Thank you.

I found the answer finally:

uses
  System.SysUtils, IdUDPClient, IdStack;

var S: TStringBuilder;
    U: TIdUDPClient;
    iPeerPort: Word;
    sPeerIP, sResponse: string;
begin
  U := TIdUDPClient.Create(nil);
  S := TStringBuilder.Create;
  try
    S.Append('M-SEARCH * HTTP/1.1').AppendLine
     .Append('HOST: 239.255.255.250:1900').AppendLine
     .Append('MAN: "ssdp:discover"').AppendLine
     .Append('MX: 3').AppendLine
     .Append('ST: ssdp:all').AppendLine
     .AppendLine;

    U.BoundIP := GStack.LocalAddress;
    U.Send('239.255.255.250', 1900, S.ToString);

    U.ReceiveTimeout := 1000;
    repeat
      sResponse := U.ReceiveString(sPeerIP, iPeerPort);
      if iPeerPort <> 0 then begin
        WriteLn(Format('%s:%d', [sPeerIP, iPeerPort]));
        WriteLn(sResponse);
      end;
    until iPeerPort = 0;
    ReadLn;
  finally
    S.Free;
    U.Free;
  end;
end.

回答1:

Call AppendLine() twice at the end of the string builder. HTTP request headers are terminated by two CRLF pairs, but you are only appending one pair, so you are sending an incomplete request.

回答2:

Quick and Dirty solution using TIdUDPServer (Indy 9).

Drop the TIdUDPServer component on the form, and using Object Inspector set Bindings to your local IP eg. 10.1.0.78:0, set BroadcastEnabled and Active to true. Drop a TMemo and TButton on the form.

Complete the OnClick and UDPRead Events as follows:

uses IdSocketHandle;
...
procedure TForm1.Button1Click(Sender: TObject);
begin
  IdUDPServer1.Send('239.255.255.250', 1900, 'M-SEARCH * HTTP/1.1' + #13#10 +
     'HOST: 239.255.255.250:1900' + #13#10 +
     'MAN: "ssdp:discover"'+ #13#10 +
     'MX: 3'+ #13#10 +
     'ST: ssdp:all'+ #13#10 +
     #13#10);
end;

procedure TForm1.IdUDPServer1UDPRead(Sender: TObject; AData: TStream; ABinding: TIdSocketHandle);
var 
   data: string;
begin

   setlength(data, Adata.Size - AData.Position); //No fragmentation :)        
   AData.ReadBuffer(data[1], length(data));

   memo1.Lines.Add('Read: ' + inttostr(AData.Position) + ' / ' + inttostr(AData.Size) + ' PeerIP: ' + ABinding.PeerIP);       
   memo1.Lines.Add(data);
end;

Save, Run and Bob's your uncle.

回答3:

For multicast M-SEARCH, the message format is defined below. Values between * * are placeholders for actual values.

M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
MAN: "ssdp:discover"
MX: *seconds to delay response*
ST: *search target*
USER-AGENT: *OS/version UPnP/1.1 product/version*

So you need to fix ReceiveTimeout to

U.ReceiveTimeout := 3000;

It should be at least equal to delay in your request (MX:3) 3 sec = 3000 milliseconds

来源：https://stackoverflow.com/questions/10909462/can-i-use-idudpclient-to-send-m-search-request

标签

Delphi

indy

ssdp