I always wondered what's the purpose of the rotate instructions some CPUs have (ROL, RCL on x86, for example). What kind of software makes use of these instructions? I first thought they may be used for encryption/computing hash codes, but these libraries are written usually in C, which doesn't have operators that map to these instructions.
Has anybody found an use for them? Why where they added to the instructions set?
Rotates are required for bit shifts across multiple words. When you SHL the lower word, the high-order bit spills out into the carry. To complete the operation, you need to shift the higher word(s) while bringing in the carry to the low-order bit. RCL is the instruction that accomplishes this.
High word Low word CF
Initial 0110 1001 1011 1001 1100 0010 0000 1101 ?
SHL low word 0110 1001 1011 1001 1000 0100 0001 1010 1
RCL high word 1101 0011 0111 0011 1000 0100 0001 1010 1
ROL and ROR are useful for examining a value bit-by-bit in a way that is (ultimately) non-destructive. They can also be used to shunt a bitmask around without bringing in garbage bits.
The rotate shift opcodes ROL, RCL, ROR, RCR) are used almost exclusively for hashing and CRC computations. They are pretty arcane and very rarely used.
The shift opcodes (SHL, SHR) are used for fast multiplication by powers of 2, or to move a low byte into a high byte of a large register.
The difference between ROL and SHL is ROL takes the high bit and rolls it around into the low bit position. SHL throws the high bit away and fills the low bit position with zero.
ROR ROL are "historic" but still useful in a number of ways.
Before the 80386 (and opcode BT), ROL would be used a lot to test a bit (SHL doesn't propagate to the carry flag) - actually in 8088, ROR/ROL would only shift by 1 bit at a time !!!!
Also if you want to shift one way and then the other way without loosing the bits that have been shifted out of scope, you'd use ROR/ROL instead of SHR/SHL
If I understand you correctly, your question is this:
"Given the fact that rotation instructions seem to be very special-purpose and not emitted by compilers, when are they actually used and why are they included in CPUs?".
The answer is twofold:
CPU's are not designed specifically to execute C programs. Rather, they are designed as general purpose machines, intended to solve a wide array of problems using a wide variety of different tools and languages.
The designers of a language are under no obligation to use every opcode in the CPU. In fact, most of the time, they do not, because some CPU instructions are highly specialized, and the language designer has no pressing need to use them.
More information about bitwise operators (and how they relate to C programming) can be found here: http://en.wikipedia.org/wiki/Bitwise_operation
Back when microprocessors were first created, most programs were written in assembly, not compiled. The majority of CPU instructions are probably not emitted by compilers (which is the impetus for creating RISC), but are often relatively easy to implement in hardware.
Many algorithms in graphics and cryptography use rotation, and their inclusion in CPUs makes it possible to write very fast algorithms in assembly.
来源：https://stackoverflow.com/questions/4976636/whats-the-purpose-of-the-rotate-instructions-rol-rcl-on-x86