COLLADA: Inverse bind pose in the wrong space?

问题

I'm working on writing my own COLLADA importer. I've gotten pretty far, loading meshes and materials and such. But I've hit a snag on animation, specifically: joint rotations.

The formula I'm using for skinning my meshes is straight-forward:

weighted;
for (i = 0; i < joint_influences; i++)
{
    weighted += 
        joint[joint_index[i]]->parent->local_matrix * 
        joint[joint_index[i]]->local_matrix * 
        skin->inverse_bind_pose[joint_index[i]] * 
        position * 
        skin->weight[j];
}
position = weighted;

And as far as the literature is concerned, this is the correct formula. Now, COLLADA specifies two types of rotations for the joints: local and global. You have to concatenate the rotations together to get the local transformation for the joint.

What the COLLADA documentation does not differentiate between is the joint's local rotation and the joint's global rotation. But in most of the models I've seen, rotations can have an id of either rotate (global) or jointOrient (local).

When I disregard the global rotations and only use the local ones, I get the bind pose for the model. But when I add the global rotations to the joint's local transformation, strange things start to happen.

This is without using global rotations:

And this is with global rotations:

In both screenshots I'm drawing the skeleton using lines, but in the first it's invisible because the joints are inside the mesh. In the second screenshot the vertices are all over the place!

For comparison, this is what the second screenshot should look like:

It's hard to see, but you can see that the joints are in the correct position in the second screenshot.

But now the weird thing. If I disregard the inverse bind pose as specified by COLLADA and instead take the inverse of the joint's parent local transform times the joint's local transform, I get the following:

In this screenshot I'm drawing a line from each vertex to the joints that have influence. The fact that I get the bind pose is not so strange, because the formula now becomes:

world_matrix * inverse_world_matrix * position * weight

But it leads me to suspect that COLLADA's inverse bind pose is in the wrong space.

So my question is: in what space does COLLADA specifies its inverse bind pose? And how can I transform the inverse bind pose to the space I need?

回答1:

I started by comparing my values to the ones I read from Assimp (an open source model loader). Stepping through the code I looked at where they built their bind matrices and their inverse bind matrices.

Eventually I ended up in SceneAnimator::GetBoneMatrices, which contains the following:

// Bone matrices transform from mesh coordinates in bind pose to mesh coordinates in skinned pose
// Therefore the formula is offsetMatrix * currentGlobalTransform * inverseCurrentMeshTransform
for( size_t a = 0; a < mesh->mNumBones; ++a)
{
    const aiBone* bone = mesh->mBones[a];
    const aiMatrix4x4& currentGlobalTransform
        = GetGlobalTransform( mBoneNodesByName[ bone->mName.data ]);
    mTransforms[a] = globalInverseMeshTransform * currentGlobalTransform * bone->mOffsetMatrix;
}

globalInverseMeshTransform is always identity, because the mesh doesn't transform anything. currentGlobalTransform is the bind matrix, the joint's parent's local matrices concatenated with the joint's local matrix. And mOffsetMatrix is the inverse bind matrix, which comes directly from the skin.

I checked the values of these matrices to my own (oh yes I compared them in a watch window) and they were exactly the same, off by maybe 0.0001% but that's insignificant. So why does Assimp's version work and mine doesn't even though the formula is the same?

Here's what I got:

When Assimp finally uploads the matrices to the skinning shader, they do the following:

helper->piEffect->SetMatrixTransposeArray( "gBoneMatrix", (D3DXMATRIX*)matrices, 60);

Waaaaait a second. They upload them transposed? It couldn't be that easy. No way.

Yup.

Something else I was doing wrong: I was converting the coordinates the right system (centimeters to meters) before applying the skinning matrices. That results in completely distorted models, because the matrices are designed for the original coordinate system.

FUTURE GOOGLERS

Read all the node transforms (rotate, translation, scale, etc.) in the order you receive them.
Concatenate them to a joint's local matrix.
Take the joint's parent and multiply it with the local matrix.
Store that as the bind matrix.
Read the skin information.
Store the joint's inverse bind pose matrix.
Store the joint weights for each vertex.
Multiply the bind matrix with the inverse bind pose matrix and transpose it, call it the skinning matrix.
Multiply the skinning matrix with the position times the joint weight and add it to the weighted position.
Use the weighted position to render.

Done!

回答2:

BTW, if you transpose the matrices upon loading them rather than transposing the matrix at the end (which can be problematic when animating) you want to perform your multiplication differently (the method you use above appears to be for using skinning in DirectX when using OpenGL friendly matrices - ergo the transpose.)

In DirectX I transpose matrices when they are loaded from the file and then I use (in the example below I am simply applying the bind pose for the sake of simplicity):

XMMATRIX l_oWorldMatrix = XMMatrixMultiply( l_oBindPose, in_oParentWorldMatrix );

XMMATRIX l_oMatrixPallette = XMMatrixMultiply( l_oInverseBindPose, l_oWorldMatrix );

XMMATRIX l_oFinalMatrix = XMMatrixMultiply( l_oBindShapeMatrix, l_oMatrixPallette );

来源：https://stackoverflow.com/questions/7595982/collada-inverse-bind-pose-in-the-wrong-space

标签

c++

math

matrix

skinning

collada