1. 技术文章
  2. Websphere MQ issue while writing a message to queue from java program

Websphere MQ issue while writing a message to queue from java program

由 ♀尐吖头ヾ 提交于 2019-12-02 07:39:10

Hummmm, where to begin?

(1) That's some bad code. Your problem is not the channel or credentials but rather your lack of code. Even though you don't realize it, your code actually, put and retrieved a message from a queue. The reason for the error message in the MQ log is because the queue manager said WTF to your code. Programming 101, if you connect to it, then disconnect from it. If you open it then close it when you are done. Don't be lazy and assume something else will clean up your garbage. Hence, the reason for the log message is because you did NOT close and disconnect from the queue manager and it said WTF.

(2) Don't use MQEnvironment class but rather put the connection information in a Hashtable and pass it to the MQQueueManager class. MQEnvironment is NOT thread safe.

(3) If you want to match on either MsgID and/or CorrelID on an MQGET then you actually have to tell the queue manager it (see 'gmo.matchOptions' below).

(4) Add the 'FAIL_IF_QUIESCING' options to all of your MQ API calls - good programming practice.

Here's your code updated so that the queue manager does NOT say WTF:

import java.io.IOException;
import java.util.Hashtable;

import com.ibm.mq.*;
import com.ibm.mq.constants.CMQC;

/**
 * Java class to connect to MQ. Post and Retrieve messages.
 * 
 * Sample Command Line Parameters 
 *  -h 127.0.0.1 -p 1414 -c TEST.CHL -m MQA1 -q TEST.Q1 -u userid -x password
 */
public class MQClientTest
{
   private Hashtable<String, String> params = null;
   private Hashtable<String, Object> mqht = null;
   private String qManager;
   private String inputQName;

   /**
    * The constructor
    */
   public MQClientTest()
   {
      super();
   }

   /**
    * Make sure the required parameters are present.
    * 
    * @return true/false
    */
   private boolean allParamsPresent()
   {
      boolean b = params.containsKey("-h") && params.containsKey("-p") &&
                  params.containsKey("-c") && params.containsKey("-m") &&
                  params.containsKey("-u") && params.containsKey("-x") &&
                  params.containsKey("-q");
      if (b)
      {
         try
         {
            Integer.parseInt((String) params.get("-p"));
         }
         catch (NumberFormatException e)
         {
            b = false;
         }
      }

      return b;
   }

   /**
    * Extract the command-line parameters and initialize the MQ variables.
    * 
    * @param args
    * @throws IllegalArgumentException
    */
   private void init(String[] args) throws IllegalArgumentException
   {
      params = new Hashtable<String, String>();
      if (args.length > 0 && (args.length % 2) == 0)
      {
         for (int i = 0; i < args.length; i += 2)
         {
            params.put(args[i], args[i + 1]);
         }
      }
      else
      {
         throw new IllegalArgumentException();
      }

      if (allParamsPresent())
      {
         qManager = (String) params.get("-m");
         inputQName = (String) params.get("-q");

         mqht = new Hashtable<String, Object>();

         mqht.put(CMQC.CHANNEL_PROPERTY, params.get("-c"));
         mqht.put(CMQC.HOST_NAME_PROPERTY, params.get("-h"));

         try
         {
            mqht.put(CMQC.PORT_PROPERTY, new Integer(params.get("-p")));
         }
         catch (NumberFormatException e)
         {
            mqht.put(CMQC.PORT_PROPERTY, new Integer(1414));
         }

         mqht.put(CMQC.USER_ID_PROPERTY, params.get("-u"));
         mqht.put(CMQC.PASSWORD_PROPERTY, params.get("-x"));

         // I don't want to see MQ exceptions at the console.
         MQException.log = null;
      }
      else
      {
         throw new IllegalArgumentException();
      }
   }

   /**
    * Method to put then get a message to/from a queue.
    */
   public void putAndGetMessage()
   {
      MQQueueManager qMgr = null;
      MQQueue        queue = null;
      MQMessage      putMessage = null;
      MQMessage      getMessage = null;

      int openOptions = CMQC.MQOO_INPUT_AS_Q_DEF | CMQC.MQOO_OUTPUT + CMQC.MQOO_FAIL_IF_QUIESCING;

      MQGetMessageOptions gmo = new MQGetMessageOptions();
      gmo.options = CMQC.MQGMO_NO_WAIT + CMQC.MQGMO_FAIL_IF_QUIESCING;

      MQPutMessageOptions pmo = new MQPutMessageOptions();
      pmo.options = CMQC.MQPMO_FAIL_IF_QUIESCING;

      String msg = "Hello World, WelCome to MQ.";

      try
      {
         qMgr = new MQQueueManager(qManager, mqht);
         queue = qMgr.accessQueue(inputQName, openOptions);

         putMessage = new MQMessage();
         putMessage.writeUTF(msg);

         // put the message on the queue
         queue.put(putMessage, pmo);

         System.out.println("Message is put on MQ.");

         // get message from MQ.
         getMessage = new MQMessage();
         // assign message id to get message.
         getMessage.messageId = putMessage.messageId;

         /*
          * Tell the queue manager that we want a message with a specific MsgID.
          */
         gmo.matchOptions = CMQC.MQMO_MATCH_MSG_ID;

         // get message options.
         queue.get(getMessage, gmo);

         String retreivedMsg = getMessage.readUTF();
         System.out.println("Message got from MQ: " + retreivedMsg);
      }
      catch (MQException e)
      {
         System.err.println("CC=" + e.completionCode + " : RC=" + e.reasonCode);
      }
      catch (IOException e)
      {
         e.printStackTrace();
      }
      finally
      {
         try
         {
            if (queue != null)
               queue.close();
         }
         catch (MQException e)
         {
            System.err.println("MQCLOSE CC=" + e.completionCode + " : RC="
                  + e.reasonCode);
         }

         try
         {
            if (qMgr != null)
               qMgr.disconnect();
         }
         catch (MQException e2)
         {
            System.err.println("MQDISC CC=" + e2.completionCode + " : RC="
                  + e2.reasonCode);
         }
      }
   }

   public static void main(String[] args)
   {
      System.out.println("Processing Main...");
      MQClientTest clientTest = new MQClientTest();

      try
      {
         // initialize MQ.
         clientTest.init(args);
         // put and retrieve message from MQ.
         clientTest.putAndGetMessage();
      }
      catch (IllegalArgumentException e)
      {
         System.out.println("Usage: java MQClientTest -h host -p port -c channel -m QueueManagerName -q QueueName -u userid -x password");
         System.exit(1);
      }

      System.out.println("Done!");
   }
}

Harsha , in the code the MQ Connection is not disconnected . Can you check if a MQ Disconnect on your QueueManager helps ? (https://www.ibm.com/support/knowledgecenter/SSFKSJ_7.5.0/com.ibm.mq.javadoc.doc/WMQJavaClasses/com/ibm/mq/MQQueueManager.html)

You can get further insights on this MQSeries thread as well (http://www.mqseries.net/phpBB2/viewtopic.php?t=60349&sid=7370d64b1edf8d305e8e6e980ea423e0) , you will find that the error is because applications have not disconnected properly from the QM.

标签
java
ibm-mq
mq
易学教程内所有资源均来自网络或用户发布的内容，如有违反法律规定的内容欢迎反馈！
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!