How to edit SIM800l library to ensure that a call is established

I use SIM800l to make calls with arduino UNO with AT commands. By using this library I make calls with gprsTest.callUp(number) function. The problem is that it returns true even the number is wrong or there is no credit.

It is clear on this part code from GPRS_Shield_Arduino.cpp library why it is happening. It doesnt check the return of ATDnumberhere;

bool GPRS::callUp(char *number)
{
    //char cmd[24];
    if(!sim900_check_with_cmd("AT+COLP=1\r\n","OK\r\n",CMD)) {
        return false;
    }
    delay(1000);
    //HACERR quitar SPRINTF para ahorar memoria ???
    //sprintf(cmd,"ATD%s;\r\n", number);
    //sim900_send_cmd(cmd);
    sim900_send_cmd("ATD");
    sim900_send_cmd(number);
    sim900_send_cmd(";\r\n");
    return true;
}

The return of ATDnumberhere; on software serial communication is:

If number is wrong ERROR

If there is no credit

 `MO CONNECTED  //instant response

  +COLP: "003069XXXXXXXX",129,"",0,"" // after 3 sec

  OK`

If it is calling and no answer

MO RING //instant response, it is ringing

NO ANSWER // after some sec

If it is calling and hang up

MO RING //instant response

NO CARRIER // after some sec

If the receiver has not carrier

ATD6985952400;

NO CARRIER

If it is calling , answer and hang up

MO RING

MO CONNECTED

+COLP: "69XXXXXXXX",129,"",0,""

OK

NO CARRIER

The question is how to use different returns for every case by this function gprsTest.callUp(number) , or at least how to return true if it is ringing ?

hlovdal

This library code seems better than the worst I have seen at first glance, but it still have some issues. The most severe is its Final result code handling.

The sim900_check_with_cmd function is conceptually almost there, however only checking for OK is in no way acceptable. It should check for every single possible final result code the modem might send. From your output examples you have the following final result codes

OK
ERROR
NO CARRIER
NO ANSWER

but there exists a few more as well. You can look at the code for atinout for an example of a is_final_result_code function (you can also compare to isFinalResponseError and isFinalResponseSuccess¹ in ST-Ericsson's U300 RIL).

The unconditional return true; at the end of GPRS::callUp is an error, but it might be deliberate due to lack of ideas for implementing a better API so that the calling client could check the intermediate result codes. But that is such a wrong way to do it. The library really should do all the stateful command line invocation and final result code parsing with no exceptions. Just doing parts of that in the library and leaving some of it up to the client is just bad design.

When clients want to inspect or act on intermediate result codes or information text that comes between the command line and the final result code, the correct way to do it is to let the library "deframe" everything it receives from the modem into individual complete lines, and for everything that is not a final result code provide this to the client through a callback function.

The following is from an unfinished update to my atinout program:

bool send_commandline(
        const char *cmdline,
        const char *prefix,
        void (*handler)(const char *response_line, void *ptr),
        void *ptr,
        FILE *modem)
{
        int res;
        char response_line[1024];

        DEBUG(DEBUG_MODEM_WRITE, ">%s\n", cmdline);
        res = fputs(cmdline, modem);
        if (res < 0) {
                error(ERR "failed to send '%s' to modem (res = %d)", cmdline, res);
                return false;
        }

        /*
         * Adding a tiny delay here to avoid losing input data which
         * sometimes happens when immediately jumping into reading
         * responses from the modem.
         */
        sleep_milliseconds(200);

        do {
                const char *line;
                line = fgets(response_line, (int)sizeof(response_line), modem);
                if (line == NULL) {
                        error(ERR "EOF from modem");
                        return false;
                }
                DEBUG(DEBUG_MODEM_READ, "<%s\n", line);
                if (prefix[0] == '\0') {
                        handler(response_line, ptr);
                } else if (STARTS_WITH(response_line, prefix)) {
                        handler(response_line + strlen(prefix) + strlen(" "), ptr);
                }
        } while (! is_final_result(response_line));

        return strcmp(response_line, "OK\r\n") == 0;
}

You can use that as a basis for implementing proper handling. If you want to get error responses out of the function, add an additional callback argument and change to

        success = strcmp(response_line, "OK\r\n") == 0;
        if (!success) {
                error_handler(response_line, ptr);
        }
        return success;

Tip: Read all of chapter 5 in the V.250 specification, it will teach you almost everything you need to know about command lines, result codes and response handling. Like for instance that a command line should also be terminated with \r only, not \r\n-

¹ Note that CONNECT is not a final result code, it is an intermediate result code, so the name isFinalResponseSuccess is strictly speaking not 100% correct.

来源：https://stackoverflow.com/questions/39659117/how-to-edit-sim800l-library-to-ensure-that-a-call-is-established

标签

c++

arduino

at-command