branch

git创建，合并和删除分支

由 痞子三分冷 提交于 2019-12-12 04:48:50
TortoiseGit-创建分支、合并分支 第一步：创建本地分支 点击右键选择TortoiseGit，选择Create Branch…，在Branch框中填写新分支的名称（若选中”switch to new branch”则直接转到新分支上，省去第二步），点击OK按钮： 第二步：通过“Switch/Checkout”切换到新创建的分支上，点击OK： 第三步：在新分支下执行PUSH操作，在对话框中保持远程分支为空白，点击OK，则将在远程创建了新的分支（在PUSH的时候远程服务器发现远程没有该分支，此时会自动创建一个和本地分支名称一样的分支，并将本地分支的内容上传到该分支）。 第四步：其他成员切换该新分支： 首先进行pull操作， 然后进行切换分支（如第二步） 第五步：分区合并 进行分支合并之前我们需要明确哪个分支将要合并到哪个分支，首先通过“Switch/CheckOut”切换到主干分支（如develop分支）,然后通过“Merge”继进行合并操作，在对话框中选择需要合并的分支。 分支合并成功后，我们即可以通过Commit与PUSH操作将合并上传到中心服务器。 你想合并到哪个分支上，就要首先切换到该分支！ 第六步：删除分支 当我们已将新分支合并到主分支后，或者放弃该分支的时候，可以对该分支进行删除操作。 首先通过“CheckOut/Switch”打开对话框，点击Switch

Is there an intelligent 3rd merge tool that understands VB.NET

由 醉酒当歌 提交于 2019-12-12 04:32:58
问题 I am having problems with our merge tool as sometimes it fails to match the unchanged blocks in the two branches correctly. When this occurs the merge tool becomes useless, and the merge has to be done by hand. Therefore I am looking for a tool that: Understand what VB.NET function/method definitions looks like and gives them a high importance when matching blocks. Knows that VB.NET will change the case of fields etc, whenever it feels like it, and therefore ignore differences in cases when

move some commits to a new branch in Hg

由 我怕爱的太早我们不能终老 提交于 2019-12-12 03:31:11
问题 My repo is currently as follows: O 7: default | O 6: default | | O 5: default | | | O 4: default | | | O 3: default | / O 2: default | O 1: default I would like to move 6 and 7 to a new branch, how can I do it? 回答1: You can use the rebase extension for this. It needs to be enabled but that link has the information on how to do it. The commands would be: hg update 2 hg branch newbranch hg commit -m "Creating new branch" hg rebase -s 6 -d 8 This creates the new branch, commits it (which would

git rebase --onto results on single commit

由 梦想的初衷 提交于 2019-12-12 03:29:15
问题 This question was migrated from Super User because it can be answered on Stack Overflow. Migrated 6 years ago . I want to create a branch out of master but I need this branch to have an empty tree. After a bit of researching I've come up with the following situation: Master branch have a single commit with a dummy file. I checkout a new branch I remove all files and commit I create a new commit with --allow-empty The following commands should get you up to that: $ git init $ touch dummy $ git

while merging two branches. My files are getting lost

由 孤街醉人 提交于 2019-12-12 02:34:10
问题 I am having two branches names as master and develop. Both branches consist of some files in it. When I merged develop to master, one of my file got deleted. I don't understand how it got deleted when I didn't put any delete command. I am using git version: 1.9.5.msysgit.1 and Windows 8. 回答1: When the branch develop removed this file after it branched off, then a merge of develop into your line (e.g. into master ) would introduce this effect there as well. 来源： https://stackoverflow.com

git remote merge commit causing false dependencies in gerrit

由 陌路散爱 提交于 2019-12-11 23:18:07
问题 I am working with a remote branch in git. Before doing any work, I do a git pull to get the ToT. When I look at the git log, I see that this automatically creates a merge commit with a message: "Merge branch 'master' of ssh://myserver:1111/mybranch". Then, I do my work and commit my change. After that I push my change up. Our system is setup with gerrit for code review. My new change shows up in gerrit with dependency on the merge commit. How do I get rid of this? 回答1: It is likely that the

How to copy one branch to another regardless changes?

由 被刻印的时光 ゝ 提交于 2019-12-11 23:14:21
问题 I'm relatively new to Git; I usually use SVN. We have several branches. Because I have not used my branch for a while, the master branch is far ahead of my branch. How can I copy master branch to my branch regardless my changes (both locally and remotely)? 回答1: suppose you want to remove all changes to your local branch and start again from master: THE FAST METHOD git checkout <your-branch> git reset --hard master git push -f origin <your-branch> #WARNING DANGEROUS COMMAND!!!! THE LONG METHOD

Automatically rebase Git sub-branches

由 不羁的心 提交于 2019-12-11 23:09:54
问题 Say I have a git history like this: A--B--C--D <master> \--E--F <topic1> \--G <topic2> That is, I have two topic branches, where one feature depends upon another. In the meantime, work has been done on master , so I want to rebase topic1 . This results in: A--B--C--D <master> | \--E'--F' <topic1> \--E--F--G <topic2> That is, topic1 was rebased but topic2 was not. I want to get to this: A--B--C--D <master> \--E'--F' <topic1> \--G <topic2> But if I simply do git rebase topic1 topic2 , Git will

Finding the original parent branch of a git branch without knowing which ones to choose from

由 扶醉桌前 提交于 2019-12-11 18:32:12
问题 Essentially I want to find the name of the original parent branch of a git branch, without having any names to choose from. o--o--o--o--o--o--o some branch \ / \ o--o--o--o--o--o my branch / ---o--o--- some other (irrelevant) branch So I want to find the name of some branch , given my branch , i.e. the branch where my branch originated from. Is this possible? From reading other questions it seems it might not be. A common denominator for the questions I've checked out, such as this one, is

git 分支命令

由 我怕爱的太早我们不能终老 提交于 2019-12-11 18:23:08
【推荐】2019 Java 开发者跳槽指南.pdf(吐血整理) >>> #查看本地分支： $ git branch #查看远程分支 $ git branch -r #创建本地分支 $ git branch [branch name] #建立分支后，仍停留在当前分支，切换分支： git checkout [branch name] #创建分支后切换到新分支 $ git checkout -b [branch name] #提交到远程分支 $ git commit -a -m '[comments]' git push origin [branch name]:[branch name] #把本地的某个分支mybranch提交到远程仓库，并作为远程仓库的master分支 $ git push origin mybranch:master #删除远程分支 $ git push origin :[branch name] #删除本地分支，强制删除用-D $ git branch -d [branch name] #将分支[branch name]和当前所在分支合并 $ git merge [branch name] #对当前分支打tag： git tag tagContent #然后push到远程即可： git push origin BranchName:BranchName 来源：
订阅 branch