问题
I want to create program that would emulate CAN port for testing purposes for another big application. Program should send previously recorded data through this virtual CAN. Anyone has any experience with such thing?
I'm thinking to establish virtual COM, and send through it data packed in CAN Frames. Could it work? And how could I establish virtual COM on linux? Found this thread Virtual Serial Port for Linux but sadly I don't get how could it be implemented into source code of program (beginner linux user and programmer under linux).
Would love to read your experience and suggestions.
回答1:
You need SocketCAN driver, that is available on modern Linux distributions like Ubuntu etc. SocketCAN provides a virtual CAN port driver:
sudo modprobe vcan
sudo ip link add dev vcan0 type vcan
sudo ip link set up vcan0
Now you can send and receive CAN frames over vcan0 device. Wikipedia article provides simple code example on how to use SocketCAN.
You'll also need can-utils for testing purposes.
You'll find more information about SocketCAN and its usage on eLinux.org
来源：https://stackoverflow.com/questions/21022749/how-to-create-virtual-can-port-on-linux-c