问题
I have a question about sending and receiving data with special chars. (German Umlauts)
When I send the string "Café Zeezicht" with the code below, then on the server-side the string is oke.
But how can I receive and decode the receiving data that containing the same chars? Now it look likes "Caf? Zeezicht"
I am searching for a pure LUA function, because I have no ability to load libraries.
------------------------------------------------------------
-- Function voor converting ASCII naar UTF8
------------------------------------------------------------
-- return char as utf8 string
local function CodeToUTF8 (Unicode)
if (Unicode == nil) then
return ""
end
if (Unicode < 0x20) then return ' '; end;
if (Unicode <= 0x7F) then return string.char(Unicode); end;
if (Unicode <= 0x7FF) then
local Byte0 = 0xC0 + math.floor(Unicode / 0x40);
local Byte1 = 0x80 + (Unicode % 0x40);
return string.char(Byte0, Byte1);
end;
if (Unicode <= 0xFFFF) then
local Byte0 = 0xE0 + math.floor(Unicode / 0x1000);
local Byte1 = 0x80 + (math.floor(Unicode / 0x40) % 0x40);
local Byte2 = 0x80 + (Unicode % 0x40);
return string.char(Byte0, Byte1, Byte2);
end;
return ""; -- ignore UTF-32 for the moment
end;
-- convert ascii string to utf8 string
function AsciiToUTF8(str)
result = ""
for i = 1, #str do
result = result .. CodeToUTF8(string.byte(str, i, i+1))
end
return result
end
------------------------------------------------------------
-- Einde Function voor converting ASCII naar UTF8
------------------------------------------------------------
回答1:
local char, byte, pairs, floor = string.char, string.byte, pairs, math.floor
local table_insert, table_concat = table.insert, table.concat
local unpack = table.unpack or unpack
local function unicode_to_utf8(code)
-- converts numeric UTF code (U+code) to UTF-8 string
local t, h = {}, 128
while code >= h do
t[#t+1] = 128 + code%64
code = floor(code/64)
h = h > 32 and 32 or h/2
end
t[#t+1] = 256 - 2*h + code
return char(unpack(t)):reverse()
end
local function utf8_to_unicode(utf8str, pos)
-- pos = starting byte position inside input string (default 1)
pos = pos or 1
local code, size = utf8str:byte(pos), 1
if code >= 0xC0 and code < 0xFE then
local mask = 64
code = code - 128
repeat
local next_byte = utf8str:byte(pos + size) or 0
if next_byte >= 0x80 and next_byte < 0xC0 then
code, size = (code - mask - 2) * 64 + next_byte, size + 1
else
code, size = utf8str:byte(pos), 1
end
mask = mask * 32
until code < mask
end
-- returns code, number of bytes in this utf8 char
return code, size
end
local map_1252_to_unicode = {
[0x80] = 0x20AC,
[0x81] = 0x81,
[0x82] = 0x201A,
[0x83] = 0x0192,
[0x84] = 0x201E,
[0x85] = 0x2026,
[0x86] = 0x2020,
[0x87] = 0x2021,
[0x88] = 0x02C6,
[0x89] = 0x2030,
[0x8A] = 0x0160,
[0x8B] = 0x2039,
[0x8C] = 0x0152,
[0x8D] = 0x8D,
[0x8E] = 0x017D,
[0x8F] = 0x8F,
[0x90] = 0x90,
[0x91] = 0x2018,
[0x92] = 0x2019,
[0x93] = 0x201C,
[0x94] = 0x201D,
[0x95] = 0x2022,
[0x96] = 0x2013,
[0x97] = 0x2014,
[0x98] = 0x02DC,
[0x99] = 0x2122,
[0x9A] = 0x0161,
[0x9B] = 0x203A,
[0x9C] = 0x0153,
[0x9D] = 0x9D,
[0x9E] = 0x017E,
[0x9F] = 0x0178,
[0xA0] = 0x00A0,
[0xA1] = 0x00A1,
[0xA2] = 0x00A2,
[0xA3] = 0x00A3,
[0xA4] = 0x00A4,
[0xA5] = 0x00A5,
[0xA6] = 0x00A6,
[0xA7] = 0x00A7,
[0xA8] = 0x00A8,
[0xA9] = 0x00A9,
[0xAA] = 0x00AA,
[0xAB] = 0x00AB,
[0xAC] = 0x00AC,
[0xAD] = 0x00AD,
[0xAE] = 0x00AE,
[0xAF] = 0x00AF,
[0xB0] = 0x00B0,
[0xB1] = 0x00B1,
[0xB2] = 0x00B2,
[0xB3] = 0x00B3,
[0xB4] = 0x00B4,
[0xB5] = 0x00B5,
[0xB6] = 0x00B6,
[0xB7] = 0x00B7,
[0xB8] = 0x00B8,
[0xB9] = 0x00B9,
[0xBA] = 0x00BA,
[0xBB] = 0x00BB,
[0xBC] = 0x00BC,
[0xBD] = 0x00BD,
[0xBE] = 0x00BE,
[0xBF] = 0x00BF,
[0xC0] = 0x00C0,
[0xC1] = 0x00C1,
[0xC2] = 0x00C2,
[0xC3] = 0x00C3,
[0xC4] = 0x00C4,
[0xC5] = 0x00C5,
[0xC6] = 0x00C6,
[0xC7] = 0x00C7,
[0xC8] = 0x00C8,
[0xC9] = 0x00C9,
[0xCA] = 0x00CA,
[0xCB] = 0x00CB,
[0xCC] = 0x00CC,
[0xCD] = 0x00CD,
[0xCE] = 0x00CE,
[0xCF] = 0x00CF,
[0xD0] = 0x00D0,
[0xD1] = 0x00D1,
[0xD2] = 0x00D2,
[0xD3] = 0x00D3,
[0xD4] = 0x00D4,
[0xD5] = 0x00D5,
[0xD6] = 0x00D6,
[0xD7] = 0x00D7,
[0xD8] = 0x00D8,
[0xD9] = 0x00D9,
[0xDA] = 0x00DA,
[0xDB] = 0x00DB,
[0xDC] = 0x00DC,
[0xDD] = 0x00DD,
[0xDE] = 0x00DE,
[0xDF] = 0x00DF,
[0xE0] = 0x00E0,
[0xE1] = 0x00E1,
[0xE2] = 0x00E2,
[0xE3] = 0x00E3,
[0xE4] = 0x00E4,
[0xE5] = 0x00E5,
[0xE6] = 0x00E6,
[0xE7] = 0x00E7,
[0xE8] = 0x00E8,
[0xE9] = 0x00E9,
[0xEA] = 0x00EA,
[0xEB] = 0x00EB,
[0xEC] = 0x00EC,
[0xED] = 0x00ED,
[0xEE] = 0x00EE,
[0xEF] = 0x00EF,
[0xF0] = 0x00F0,
[0xF1] = 0x00F1,
[0xF2] = 0x00F2,
[0xF3] = 0x00F3,
[0xF4] = 0x00F4,
[0xF5] = 0x00F5,
[0xF6] = 0x00F6,
[0xF7] = 0x00F7,
[0xF8] = 0x00F8,
[0xF9] = 0x00F9,
[0xFA] = 0x00FA,
[0xFB] = 0x00FB,
[0xFC] = 0x00FC,
[0xFD] = 0x00FD,
[0xFE] = 0x00FE,
[0xFF] = 0x00FF,
}
local map_unicode_to_1252 = {}
for code1252, code in pairs(map_1252_to_unicode) do
map_unicode_to_1252[code] = code1252
end
function string.fromutf8(utf8str)
local pos, result_1252 = 1, {}
while pos <= #utf8str do
local code, size = utf8_to_unicode(utf8str, pos)
pos = pos + size
code = code < 128 and code or map_unicode_to_1252[code] or ('?'):byte()
table_insert(result_1252, char(code))
end
return table_concat(result_1252)
end
function string.toutf8(str1252)
local result_utf8 = {}
for pos = 1, #str1252 do
local code = str1252:byte(pos)
table_insert(result_utf8, unicode_to_utf8(map_1252_to_unicode[code] or code))
end
return table_concat(result_utf8)
end
Usage:
local str1252 = "1\128" -- "one euro" in latin-1
local str_utf8 = str1252:toutf8() -- "1\226\130\172" -- one euro in utf-8
local str1252_2 = str_utf8:fromutf8()
来源：https://stackoverflow.com/questions/41855842/converting-utf-8-string-to-ascii-in-pure-lua