问题
I would like to do a scan in a LAN network to find devices linked. I'm developping an app in IOS for IPAD How do I do???
回答1:
Because those are mobile devices I will assume you want to find devices on a wireless network. Theoretically, since wifi uses shared medium for communication, you can passively listen for traffic flowing through the network and collect data about client without sending any packets. This is something that is commonly referred to as a promiscuous mode. In practice there is 99% chance that the network adapter driver will allow you only to get traffic destined for your MAC address. In that case you will need to resort to actively scanning the network subnet which is not 100% accurate and depending on how the network is implemented can be considered as a possible attack.
The simple way of scanning is sending ICMP requests (ping) to every IP address in the subnet and collecting data from those who send back the echo reply. This is not reliable because some hosts won't respond to ICMP echo request even if they are active. First thing you need is to find out your own IP address and the subnet mask, and calculate the range of possible addresses in your subnet. The range is obtained by using logical AND operator where operands are binary values of your IP address and subnet mask. This is an example from the program that calculates this for typical 192.168.1.1 subnet with 255.255.255.0 subnet mask (192.168.1.1/24 in CIDR notation):
Address: 192.168.1.1 11000000.10101000.00000001 .00000001
Netmask: 255.255.255.0 = 24 11111111.11111111.11111111 .00000000
Wildcard: 0.0.0.255 00000000.00000000.00000000 .11111111
Network: 192.168.1.0/24 11000000.10101000.00000001 .00000000
Broadcast: 192.168.1.255 11000000.10101000.00000001 .11111111
HostMin: 192.168.1.1 11000000.10101000.00000001 .00000001
HostMax: 192.168.1.254 11000000.10101000.00000001 .11111110
Then you would iterate through the range and ping every address. Another thing you can consider is listening for broadcast traffic such as ARP and collecting some of the information that way. I don't know what are you trying to make but you can't get many useful information this way, except for vendor of a host's network adapter.
回答2:
Check my LAN Scan on Github. It does exactly what you want.
回答3:
Bonjour have been around since 2002, have a look at it!
I mean, just look at their current tagline:
Bonjour, also known as zero-configuration networking, enables automatic discovery of devices and services on a local network using industry standard IP protocols. Bonjour makes it easy to discover, publish, and resolve network services with a sophisticated, yet easy-to-use, programming interface that is accessible from Cocoa, Ruby, Python, and other languages.
回答4:
I recently used MMLANScan that was pretty good. It discovers IP, Hostname and MAC Address.
来源：https://stackoverflow.com/questions/17953119/how-scan-devices-in-a-lan-network