问题
I'm attempting to implement concurrent kernel launches for a very complex CUDA kernel, so I thought I'd start out with a simple example. It just launches a kernel which does a sum reduction. Simple enough. Here it is:
#include <stdlib.h>
#include <stdio.h>
#include <time.h>
#include <cuda.h>
extern __shared__ char dsmem[];
__device__ double *scratch_space;
__device__ double NDreduceSum(double *a, unsigned short length)
{
const int tid = threadIdx.x;
unsigned short k = length;
double *b;
b = scratch_space;
for (int i = tid; i < length; i+= blockDim.x)
b[i] = a[i];
__syncthreads();
do {
k = (k + 1) / 2;
if (tid < k && tid + k < length)
b[tid] += b[tid + k];
length = k;
__syncthreads();
} while (k > 1);
return b[0];
}
__device__ double reduceSum(double *a, unsigned short length)
{
const int tid = threadIdx.x;
unsigned short k = length;
do
{
k = (k + 1) / 2;
if (tid < k && tid + k < length)
a[tid] += a[tid + k];
length = k;
__syncthreads();
}
while (k > 1);
return a[0];
}
__global__ void kernel_thing(double *ad, int size)
{
double sum_1, sum_2, sum_3;
time_t begin, end, t1, t2, t3;
scratch_space = (double *) &dsmem[0];
for (int j = 0; j < 1000000; j++) {
begin = clock();
sum_1 = NDreduceSum(ad, size);
end = clock();
}
__syncthreads();
t1 = end - begin;
begin = clock();
sum_2 = 0;
if (threadIdx.x == 0) {
for (int i = 0; i < size; i++) {
sum_2 += ad[i];
}
}
__syncthreads();
end = clock();
t2 = end - begin;
__syncthreads();
begin = clock();
sum_3 = reduceSum(ad, size);
end = clock();
__syncthreads();
t3 = end - begin;
if (threadIdx.x == 0) {
printf("Sum found: %lf and %lf and %lf. In %ld and %ld and %ld ticks.\n", sum_1, sum_2, sum_3, t1, t2, t3);
}
}
int main(int argc, char **argv)
{
int i;
const int size = 512;
double *a, *ad, *b, *bd;
double sum_a, sum_b;
cudaStream_t stream_a, stream_b;
cudaError_t result;
cudaEvent_t a_start, a_stop, b_start, b_stop;
a = (double *) malloc(sizeof(double) * size);
b = (double *) malloc(sizeof(double) * size);
srand48(time(0));
for (i = 0; i < size; i++) {
a[i] = drand48();
}
for (i = 0; i < size; i++) {
b[i] = drand48();
}
sum_a = 0;
for (i = 0; i < size; i++) {
sum_a += a[i];
}
sum_b = 0;
for (i = 0; i < size; i++) {
sum_b += b[i];
}
printf("Looking for sum_a %lf\n", sum_a);
printf("Looking for sum_b %lf\n", sum_b);
cudaEventCreate(&a_start);
cudaEventCreate(&b_start);
cudaEventCreate(&a_stop);
cudaEventCreate(&b_stop);
cudaMalloc((void **) &ad, sizeof(double) * size);
cudaMalloc((void **) &bd, sizeof(double) * size);
result = cudaStreamCreate(&stream_a);
result = cudaStreamCreate(&stream_b);
result = cudaMemcpyAsync(ad, a, sizeof(double) * size, cudaMemcpyHostToDevice, stream_a);
result = cudaMemcpyAsync(bd, b, sizeof(double) * size, cudaMemcpyHostToDevice, stream_b);
cudaEventRecord(a_start);
kernel_thing<<<1, 512, 49152, stream_a>>>(ad, size);
cudaEventRecord(a_stop);
cudaEventRecord(b_start);
kernel_thing<<<1, 512, 49152, stream_b>>>(bd, size);
cudaEventRecord(b_stop);
result = cudaMemcpyAsync(a, ad, sizeof(double) * size, cudaMemcpyDeviceToHost, stream_a);
result = cudaMemcpyAsync(b, bd, sizeof(double) * size, cudaMemcpyDeviceToHost, stream_b);
cudaEventSynchronize(a_stop);
cudaEventSynchronize(b_stop);
float a_ms = 0;
float b_ms = 0;
cudaEventElapsedTime(&a_ms, a_start, a_stop);
cudaEventElapsedTime(&b_ms, b_start, b_stop);
printf("%lf ms for A.\n", a_ms);
printf("%lf ms for B.\n", b_ms);
result = cudaStreamDestroy(stream_a);
result = cudaStreamDestroy(stream_b);
if (result != cudaSuccess) {
printf("I should probably do this after each important operation.\n");
}
/*
printf("Matrix after:\n");
for (i = 0; i < size; i++) {
printf("%lf ", a[i]);
}
printf("\n");
*/
free(a);
free(b);
cudaFree(ad);
cudaFree(bd);
return 0;
}
Compiled like so:
CFLAGS = -arch sm_35
CC = nvcc
all: parallel
parallel: parallel.cu
$(LINK.c) $^ -o $@
clean:
rm -f *.o core parallel
I'm using a single Tesla K20X.
When I run this simple example, I get the following output:
Looking for sum_a 247.983945
Looking for sum_b 248.033749
Sum found: 247.983945 and 247.983945 and 247.983945. In 3242 and 51600 and 4792 ticks.
Sum found: 248.033749 and 248.033749 and 248.033749. In 3314 and 52000 and 4497 ticks.
4645.079102 ms for A.
4630.725098 ms for B.
Application 577759 resources: utime ~8s, stime ~2s, Rss ~82764, inblocks ~406, outblocks ~967
So, as you can see, each of the kernels gets the correct results and takes around 4.5 s, which is what I got in an earlier one-kernel version. Great! However, as you can see from the aprun output, the wall time is actually around 10 s, which is much more than the one-kernel version. So, it looks like the kernels are either not launching in parallel, or I'm not getting nearly the speed-up (2x) that I was expecting from concurrent kernel launches.
To tl;dr this question:
- Am I missing anything in my code example? Are the kernels actually launching in parallel?
- What kind of speed-up should I expect with a Tesla K20X? Shouldn't the kernels run exactly in parallel, completing twice the work in the same time? How many kernels can I expect to run efficiently in parallel?
Thanks for you help.
回答1:
The cudaEventRecord operations in between your kernels are causing serialization.
Right now the results you are getting:
4645.079102 ms for A.
4630.725098 ms for B.
are back-to-back due to this serialization.
Instead, just time the entire kernel launch sequence:
cudaEventRecord(a_start);
kernel_thing<<<1, 512, 49152, stream_a>>>(ad, size);
kernel_thing<<<1, 512, 49152, stream_b>>>(bd, size);
cudaEventRecord(a_stop);
And I think you will see an elapsed time for (a_start, a_stop) that is roughly the same as one of your previous kernels (~4600ms) indicating more or less full concurrency. I used CUDA 6 RC, copied data back to the host rather than printf from kernel, and eliminated the cudaEventRecord operations between the kernel calls, and I got an overall execution time of ~4.8s. If I didn't modify the cudaEventRecord arrangement, instead my execution time was ~8.3s
A few other notes:
- I wouldn't use
printffrom kernel when running tests like these. - You won't get overlap of compute and
cudaMemcpyAsyncwhen the host buffer is allocated withmalloc. You need to usecudaHostAlloc. - I would start with running and understanding the concurrent kernels cuda sample first.
- You may want to review the appropriate section of the programming guide
来源：https://stackoverflow.com/questions/23050945/concurrent-kernel-launch-example-cuda