问题

In a numerical solver I am working on in C, I need to invert a 2x2 matrix and it then gets multiplied on the right side by another matrix:

C = B . inv(A)

I have been using the following definition of an inverted 2x2 matrix:

a = A[0][0];
b = A[0][1];
c = A[1][0];
d = A[1][1];
invA[0][0] = d/(a*d-b*c);
invA[0][1] = -b/(a*d-b*c);
invA[1][0] = -c/(a*d-b*c);
invA[1][1] = a/(a*d-b*c);

In the first few iterations of my solver this seems to give the correct answers, however, after a few steps things start to grow and eventually explode.

Now, comparing to an implementation using SciPy, I found that the same math does not explode. The only difference I can find is that the SciPy code uses scipy.linalg.inv(), which internally uses LAPACK internally to perform the inversion.

When I replace the call to inv() with the above calculations the Python version does explode, so I'm pretty sure this is the problem. Small differences in the calculations are creeping in, which leads me to believe it is a numerical problem--not entirely surprising for an inversion operation.

I am using double-precision floats (64-bit), hoping that numerical issues would not be a problem, but apparently that is not the case.

But: I would like to solve this in my C code without needing to call out to a library like LAPACK, because the whole reason for porting it to pure C is to get it running on a target system. Moreover, I'd like to understand the problem, not just call out to a black box. Eventually I'd like to it run with single-precision too, if possible.

So, my question is, for such a small matrix, is there a numerically more stable way to calculate the inverse of A?

Thanks.

Edit: Currently trying to figure out if I can just avoid the inversion by solving for C.

回答1:

Don't invert the matrix. Almost always, the thing you're using the inverse to accomplish can be done faster and more accurately without inverting the matrix. Matrix inversion is inherently unstable, and mixing that with floating point numbers is asking for trouble.

Saying C = B . inv(A) is the same as saying you want to solve AC = B for C. You can accomplish this by splitting up each B and C into two columns. Solving A C1 = B1 and A C2 = B2 will produce C.

回答2:

Your code is fine; however, it risks loss of precision from any of the four subtractions.

Consider using more advanced techniques such as that used in matfunc.py. That code performs the inversion using a QR decomposition implemented with Householder reflections. The result is further improved with iterative refinement.

回答3:

Computing the determinant is not stable. A better way is to use Gauss-Jordan with partial pivoting, that you can work out explicitly easily here.

Solving a 2x2 system

Let us solve the system (use c, f = 1, 0 then c, f = 0, 1 to get the inverse)

a * x + b * y = c
d * x + e * y = f

In pseudo code, this reads

if a == 0 and d == 0 then "singular"

if abs(a) >= abs(d):
    alpha <- d / a
    beta <- e - b * alpha
    if beta == 0 then "singular"
    gamma <- f - c * alpha
    y <- gamma / beta
    x <- (c - b * y) / a
else
    swap((a, b, c), (d, e, f))
    restart

This is stabler than determinant + comatrix (beta is the determinant * some constant, computed in a stable way). You can work out the full pivoting equivalent (ie. potentially swapping x and y, so that the first division by a is such that a is the largest number in magnitude amongst a, b, d, e), and this may be stabler in some circumstances, but the above method has been working well for me.

This is equivalent to performing LU decomposition (store gamma, beta, a, b, c if you want to store this LU decomposition).

Computing the QR decomposition can also be done explicitly (and is also very stable provided you do it correctly), but it is slower (and involves taking square roots). The choice is yours.

Improving accuracy

If you need better accuracy (the above method is stable, but there is some roundoff error, proportional to the ratio of the eigenvalues), you can "solve for the correction".

Indeed, suppose you solved A * x = b for x with the above method. You now compute A * x, and you find that it does not quite equals b, that there is a slight error:

A * x - b = db

Now, if you solve for dx in A * dx = db, you have

A * (x - dx) = b + db - db - ddb = b - ddb

where ddb is the error induced by the numerical solving of A * dx = db, which is typically much smaller than db (since db is much smaller than b).

You can iterate the above procedure, but one step is typically required to restore full machine precision.

回答4:

Use the Jacobi method, which is an iterative method that involves "inverting" only the main diagonal of A, which is very straightforward and less prone to numerical instability than inverting the whole matrix.

回答5:

I agree with Jean-Vicotr that you should probably use the Jacobbian methode. Here's my example:

#Helper functions:
def check_zeros(A,I,row, col=0):
"""
returns recursively the next non zero matrix row A[i]
"""
if A[row, col] != 0:
    return row
else:
    if row+1 == len(A):
        return "The Determinant is Zero"
    return check_zeros(A,I,row+1, col)

def swap_rows(M,I,row,index):
"""
swaps two rows in a matrix
"""
swap = M[row].copy()
M[row], M[index] = M[index], swap
swap = I[row].copy()
I[row], I[index] = I[index], swap

# Your Matrix M
M = np.array([[0,1,5,2],[0,4,9,23],[5,4,3,5],[2,3,1,5]], dtype=float)
I = np.identity(len(M))

M_copy = M.copy()
rows = len(M)

for i in range(rows):
index =check_zeros(M,I,i,i)
while index>i:
    swap_rows(M, I, i, index)
    print "swaped"
    index =check_zeros(M,I,i,i) 

I[i]=I[i]/M[i,i]
M[i]=M[i]/M[i,i]   

for j in range(rows):
    if j !=i:
        I[j] = I[j] - I[i]*M[j,i]
        M[j] = M[j] - M[i]*M[j,i]
print M
print I  #The Inverse Matrix

来源：https://stackoverflow.com/questions/8690456/numerically-stable-inverse-of-a-2x2-matrix

标签

python