问题
I have a text file produced by some commercial software, looking like below. It consists in brackets delimited sections, each of which counts several million elements but the exact value changes from one case to another.
(1
2
3
...
)
(11
22
33
...
)
(111
222
333
...
)
I need to achieve an output like:
1; 11; 111
2; 22; 222
3; 33; 333
... ... ...
I found a complicated way that is:
perform sed operations to get
1 2 3 ... # 11 22 33 ... # 111 222 333 ...use awk as follows to split my file in several sub-files
awk -v RS="#" '{print > ("splitted-" NR ".txt")}'remove white spaces from my subfiles again with sed
sed -i '/^[[:space:]]*$/d' splitted*.txtjoin everything together:
paste splitted*.txt > out.txtadd a field separator (defined in my bash script)
awk -v sep=$my_sep 'BEGIN{OFS=sep}{$1=$1; print }' out.txt > formatted.txt
I feel this is crappy as I loop over million lines several time. Even if the return time is quite OK (~80sec), I'd like to find a full awk solution but can't get to it. Something like:
awk 'BEGIN{RS="(\\n)"; OFS=";"} { print something } '
I found some related questions, especially this one row to column conversion with awk, but it assumes a constant number of lines between brackets which I can't do.
Any help would be appreciated.
回答1:
With GNU awk for multi-char RS and true multi dimensional arrays:
$ cat tst.awk
BEGIN {
RS = "(\\s*[()]\\s*)+"
OFS = ";"
}
NR>1 {
cell[NR][1]
split($0,cell[NR])
}
END {
for (rowNr=1; rowNr<=NF; rowNr++) {
for (colNr=2; colNr<=NR; colNr++) {
printf "%6s%s", cell[colNr][rowNr], (colNr<NR ? OFS : ORS)
}
}
}
$ awk -f tst.awk file
1; 11; 111
2; 22; 222
3; 33; 333
...; ...; ...
回答2:
If you know you have 3 columns, you can do it in a very ugly way as following:
pr -3ts <file>
All that needs to be done then is to remove your brackets:
$ pr -3ts ~/tmp/f | awk 'BEGIN{OFS="; "}{gsub(/[()]/,"")}(NF){$1=$1; print}'
1; 11; 111
2; 22; 222
3; 33; 333
...; ...; ...
You can also do it in a single awk line, but it just complicates things. The above is quick and easy.
This awk program does the full generic version:
awk 'BEGIN{r=c=0}
/)/{r=0; c++; next}
{gsub(/[( ]/,"")}
(NF){a[r++,c]=$1; rm=rm>r?rm:r}
END{ for(i=0;i<rm;++i) {
printf a[i,0];
for(j=1;j<c;++j) printf "; " a[i,j];
print ""
}
}' <file>
回答3:
Could you please try following once, considering that your actual Input_file is same as shown samples.
awk -v RS="" '
{
gsub(/\n|, /,",")
}
1' Input_file |
awk '
{
while(match($0,/\([^\)]*/)){
value=substr($0,RSTART+1,RLENGTH-2)
$0=substr($0,RSTART+RLENGTH)
num=split(value,array,",")
for(i=1;i<=num;i++){
val[i]=val[i]?val[i] OFS array[i]:array[i]
}
}
for(j=1;j<=num;j++){
print val[j]
}
delete val
delete array
value=""
}' OFS="; "
OR(above script is considering that numbers inside (...) will be constant, now adding script which will working even field numbers of not equal inside (....).
awk -v RS="" '
{
gsub(/\n/,",")
gsub(/, /,",")
}
1' Input_file |
awk '
{
while(match($0,/\([^\)]*/)){
value=substr($0,RSTART+1,RLENGTH-2)
$0=substr($0,RSTART+RLENGTH)
num=split(value,array,",")
for(i=1;i<=num;i++){
val[i]=val[i]?val[i] OFS array[i]:array[i]
max=num>max?num:max
}
}
for(j=1;j<=max;j++){
print val[j]
}
delete val
delete array
}' OFS="; "
Output will be as follows.
1; 11; 111
2; 22; 222
3; 33; 333
Explanation: Adding explanation for above code here.
awk -v RS="" ' ##Setting RS(record separator) as NULL here.
{ ##Starting BLOCK here.
gsub(/\n/,",") ##using gsub to substitute new line OR comma with space with comma here.
gsub(/, /,",")
}
1' Input_file | ##Mentioning 1 will be printing edited/non-edited line of Input_file. Using | means sending this output as Input to next awk program.
awk ' ##Starting another awk program here.
{
while(match($0,/\([^\)]*/)){ ##Using while loop which will run till a match is FOUND for (...) in lines.
value=substr($0,RSTART+1,RLENGTH-2) ##storing substring from RSTART+1 to till RLENGTH-1 value to variable value here.
$0=substr($0,RSTART+RLENGTH) ##Re-creating current line with substring valeu from RSTART+RLENGTH till last of line.
num=split(value,array,",") ##Splitting value variable into array named array whose delimiter is comma here.
for(i=1;i<=num;i++){ ##Using for loop which runs from i=1 to till value of num(length of array).
val[i]=val[i]?val[i] OFS array[i]:array[i] ##Creating array val whose index is value of variable i and concatinating its own values.
}
}
for(j=1;j<=num;j++){ ##Starting a for loop from j=1 to till value of num here.
print val[j] ##Printing value of val whose index is j here.
}
delete val ##Deleting val here.
delete array ##Deleting array here.
value="" ##Nullifying variable value here.
}' OFS="; " ##Making OFS value as ; with space here.
NOTE: This should work for more than 3 values inside (...) brackets also.
回答4:
awk 'BEGIN { RS = "\\s*[()]\\s*"; FS = "\\s*" }
NF > 0 {
maxCol++
if (NF > maxRow)
maxRow = NF
for (row = 1; row <= NF; row++)
a[row,maxCol] = $row
}
END {
for (row = 1; row <= maxRow; row++) {
for (col = 1; col <= maxCol; col++)
printf "%s", a[row,col] ";"
print ""
}
}' yourFile
output
1;11;111;
2;22;222;
3;33;333;
...;...;...;
Change FS= "\\s*" to FS = "\n*" when you also want to allow spaces inside your fields.
This script supports columns of different lengths.
When benchmarking also consider replacing [i,j] with [i][j] for GNU awk. I'm unsure which one is faster and did not benchmark the script myself.
回答5:
Here is the Perl one-liner solution
$ cat edouard2.txt
(1
2
3
a
)
(11
22
33
b
)
(111
222
333
c
)
$ perl -lne ' $x=0 if s/[)(]// ; if(/(\S+)/) { @t=@{$val[$x]};push(@t,$1);$val[$x++]=[@t] } END { print join(";",@{$val[$_]}) for(0..$#val) }' edouard2.txt
1;11;111
2;22;222
3;33;333
a;b;c
回答6:
I would convert each section to a row and then transpose after, e.g. assuming you are using GNU awk:
<infile awk '{ gsub("[( )]", ""); $1=$1 } 1' RS='\\)\n\\(' OFS=';' |
datamash -t';' transpose
Output:
1;11;111
2;22;222
3;33;333
...;...;...
来源：https://stackoverflow.com/questions/53706983/splitting-a-large-complex-one-column-file-into-several-columns-with-awk