How to increase performance of memcpy

问题

Summary:

memcpy seems unable to transfer over 2GB/sec on my system in a real or test application. What can I do to get faster memory-to-memory copies?

Full details:

As part of a data capture application (using some specialized hardware), I need to copy about 3 GB/sec from temporary buffers into main memory. To acquire data, I provide the hardware driver with a series of buffers (2MB each). The hardware DMAs data to each buffer, and then notifies my program when each buffer is full. My program empties the buffer (memcpy to another, larger block of RAM), and reposts the processed buffer to the card to be filled again. I am having issues with memcpy moving the data fast enough. It seems that the memory-to-memory copy should be fast enough to support 3GB/sec on the hardware that I am running on. Lavalys EVEREST gives me a 9337MB/sec memory copy benchmark result, but I can't get anywhere near those speeds with memcpy, even in a simple test program.

I have isolated the performance issue by adding/removing the memcpy call inside the buffer processing code. Without the memcpy, I can run full data rate- about 3GB/sec. With the memcpy enabled, I am limited to about 550Mb/sec (using current compiler).

In order to benchmark memcpy on my system, I've written a separate test program that just calls memcpy on some blocks of data. (I've posted the code below) I've run this both in the compiler/IDE that I'm using (National Instruments CVI) as well as Visual Studio 2010. While I'm not currently using Visual Studio, I am willing to make the switch if it will yield the necessary performance. However, before blindly moving over, I wanted to make sure that it would solve my memcpy performance problems.

Visual C++ 2010: 1900 MB/sec

NI CVI 2009: 550 MB/sec

While I am not surprised that CVI is significantly slower than Visual Studio, I am surprised that the memcpy performance is this low. While I'm not sure if this is directly comparable, this is much lower than the EVEREST benchmark bandwidth. While I don't need quite that level of performance, a minimum of 3GB/sec is necessary. Surely the standard library implementation can't be this much worse than whatever EVEREST is using!

What, if anything, can I do to make memcpy faster in this situation?

Hardware details: AMD Magny Cours- 4x octal core 128 GB DDR3 Windows Server 2003 Enterprise X64

Test program:

#include <windows.h>
#include <stdio.h>

const size_t NUM_ELEMENTS = 2*1024 * 1024;
const size_t ITERATIONS = 10000;

int main (int argc, char *argv[])
{
    LARGE_INTEGER start, stop, frequency;

    QueryPerformanceFrequency(&frequency);

    unsigned short * src = (unsigned short *) malloc(sizeof(unsigned short) * NUM_ELEMENTS);
    unsigned short * dest = (unsigned short *) malloc(sizeof(unsigned short) * NUM_ELEMENTS);

    for(int ctr = 0; ctr < NUM_ELEMENTS; ctr++)
    {
        src[ctr] = rand();
    }

    QueryPerformanceCounter(&start);

    for(int iter = 0; iter < ITERATIONS; iter++)
        memcpy(dest, src, NUM_ELEMENTS * sizeof(unsigned short));

    QueryPerformanceCounter(&stop);

    __int64 duration = stop.QuadPart - start.QuadPart;

    double duration_d = (double)duration / (double) frequency.QuadPart;

    double bytes_sec = (ITERATIONS * (NUM_ELEMENTS/1024/1024) * sizeof(unsigned short)) / duration_d;

    printf("Duration: %.5lfs for %d iterations, %.3lfMB/sec\n", duration_d, ITERATIONS, bytes_sec);

    free(src);
    free(dest);

    getchar();

    return 0;
}

EDIT: If you have an extra five minutes and want to contribute, can you run the above code on your machine and post your time as a comment?

回答1:

I have found a way to increase speed in this situation. I wrote a multi-threaded version of memcpy, splitting the area to be copied between threads. Here are some performance scaling numbers for a set block size, using the same timing code as found above. I had no idea that the performance, especially for this small size of block, would scale to this many threads. I suspect that this has something to do with the large number of memory controllers (16) on this machine.

Performance (10000x 4MB block memcpy):

 1 thread :  1826 MB/sec
 2 threads:  3118 MB/sec
 3 threads:  4121 MB/sec
 4 threads: 10020 MB/sec
 5 threads: 12848 MB/sec
 6 threads: 14340 MB/sec
 8 threads: 17892 MB/sec
10 threads: 21781 MB/sec
12 threads: 25721 MB/sec
14 threads: 25318 MB/sec
16 threads: 19965 MB/sec
24 threads: 13158 MB/sec
32 threads: 12497 MB/sec

I don't understand the huge performance jump between 3 and 4 threads. What would cause a jump like this?

I've included the memcpy code that I wrote below for other that may run into this same issue. Please note that there is no error checking in this code- this may need to be added for your application.

#define NUM_CPY_THREADS 4

HANDLE hCopyThreads[NUM_CPY_THREADS] = {0};
HANDLE hCopyStartSemaphores[NUM_CPY_THREADS] = {0};
HANDLE hCopyStopSemaphores[NUM_CPY_THREADS] = {0};
typedef struct
{
    int ct;
    void * src, * dest;
    size_t size;
} mt_cpy_t;

mt_cpy_t mtParamters[NUM_CPY_THREADS] = {0};

DWORD WINAPI thread_copy_proc(LPVOID param)
{
    mt_cpy_t * p = (mt_cpy_t * ) param;

    while(1)
    {
        WaitForSingleObject(hCopyStartSemaphores[p->ct], INFINITE);
        memcpy(p->dest, p->src, p->size);
        ReleaseSemaphore(hCopyStopSemaphores[p->ct], 1, NULL);
    }

    return 0;
}

int startCopyThreads()
{
    for(int ctr = 0; ctr < NUM_CPY_THREADS; ctr++)
    {
        hCopyStartSemaphores[ctr] = CreateSemaphore(NULL, 0, 1, NULL);
        hCopyStopSemaphores[ctr] = CreateSemaphore(NULL, 0, 1, NULL);
        mtParamters[ctr].ct = ctr;
        hCopyThreads[ctr] = CreateThread(0, 0, thread_copy_proc, &mtParamters[ctr], 0, NULL); 
    }

    return 0;
}

void * mt_memcpy(void * dest, void * src, size_t bytes)
{
    //set up parameters
    for(int ctr = 0; ctr < NUM_CPY_THREADS; ctr++)
    {
        mtParamters[ctr].dest = (char *) dest + ctr * bytes / NUM_CPY_THREADS;
        mtParamters[ctr].src = (char *) src + ctr * bytes / NUM_CPY_THREADS;
        mtParamters[ctr].size = (ctr + 1) * bytes / NUM_CPY_THREADS - ctr * bytes / NUM_CPY_THREADS;
    }

    //release semaphores to start computation
    for(int ctr = 0; ctr < NUM_CPY_THREADS; ctr++)
        ReleaseSemaphore(hCopyStartSemaphores[ctr], 1, NULL);

    //wait for all threads to finish
    WaitForMultipleObjects(NUM_CPY_THREADS, hCopyStopSemaphores, TRUE, INFINITE);

    return dest;
}

int stopCopyThreads()
{
    for(int ctr = 0; ctr < NUM_CPY_THREADS; ctr++)
    {
        TerminateThread(hCopyThreads[ctr], 0);
        CloseHandle(hCopyStartSemaphores[ctr]);
        CloseHandle(hCopyStopSemaphores[ctr]);
    }
    return 0;
}

回答2:

I'm not sure if it's done in run time or if you have to do it compile time, but you should have SSE or similar extensions enabled as the vector unit often can write 128 bits to the memory compared to 64 bits for the CPU.

~~Try this implementation.~~

Yeah, and make sure that both the source and destination is aligned to 128 bits. If your source and destination are not aligned respective to each other your memcpy() will have to do some serious magic. :)

回答3:

You have a few barriers to obtaining the required memory performance:

Bandwidth - there is a limit to how quickly data can move from memory to the CPU and back again. According to this Wikipedia article, 266MHz DDR3 RAM has an upper limit of around 17GB/s. Now, with a memcpy you need to halve this to get your maximum transfer rate since the data is read and then written. From your benchmark results, it looks like you're not running the fastest possible RAM in your system. If you can afford it, upgrade the motherboard / RAM (and it won't be cheap, Overclockers in the UK currently have 3x4GB PC16000 at £400)
The OS - Windows is a preemptive multitasking OS so every so often your process will be suspended to allow other processes to have a look in and do stuff. This will clobber your caches and stall your transfer. In the worst case your entire process could be cached to disk!
The CPU - the data being moved has a long way to go: RAM -> L2 Cache -> L1 Cache -> CPU -> L1 -> L2 -> RAM. There may even be an L3 cache. If you want to involve the CPU you really want to be loading L2 whilst copying L1. Unfortunately, modern CPUs can run through an L1 cache block quicker than the time taken to load the L1. The CPU has a memory controller that helps a lot in these cases where your streaming data into the CPU sequentially but you're still going to have problems.

Of course, the faster way to do something is to not do it. Can the captured data be written anywhere in RAM or is the buffer used at a fixed location. If you can write it anywhere, then you don't need the memcpy at all. If it's fixed, could you process the data in place and use a double buffer type system? That is, start capturing data and when it's half full, start processing the first half of the data. When the buffer's full, start writing captured data to the start and process the second half. This requires that the algorithm can process the data faster than the capture card produces it. It also assumes that the data is discarded after processing. Effectively, this is a memcpy with a transformation as part of the copy process, so you've got:

load -> transform -> save
\--/                 \--/
 capture card        RAM
   buffer

instead of:

load -> save -> load -> transform -> save
\-----------/
memcpy from
capture card
buffer to RAM

Or get faster RAM!

EDIT: Another option is to process the data between the data source and the PC - could you put a DSP / FPGA in there at all? Custom hardware will always be faster than a general purpose CPU.

Another thought: It's been a while since I've done any high performance graphics stuff, but could you DMA the data into the graphics card and then DMA it out again? You could even take advantage of CUDA to do some of the processing. This would take the CPU out of the memory transfer loop altogether.

回答4:

One thing to be aware of is that your process (and hence the performance of memcpy()) is impacted by the OS scheduling of tasks - it's hard to say how much of a factor this is in your timings, bu tit is difficult to control. The device DMA operation isn't subject to this, since it isn't running on the CPU once it's kicked off. Since your application is an actual real-time application though, you might want to experiment with Windows' process/thread priority settings if you haven't already. Just keep in mind that you have to be careful about this because it can have a really negative impact in other processes (and the user experience on the machine).

Another thing to keep in mind is that the OS memory virtualization might have an impact here - if the memory pages you're copying to aren't actually backed by physical RAM pages, the memcpy() operation will fault to the OS to get that physical backing in place. Your DMA pages are likely to be locked into physical memory (since they have to be for the DMA operation), so the source memory to memcpy() is likely not an issue in this regard. You might consider using the Win32 VirtualAlloc() API to ensure that your destination memory for the memcpy() is committed (I think VirtualAlloc() is the right API for this, but there might be a better one that I'm forgetting - it's been a while since I've had a need to do anything like this).

Finally, see if you can use the technique explained by Skizz to avoid the memcpy() altogether - that's your best bet if resources permit.

回答5:

First of all, you need to check that memory is aligned on 16 byte boundary, otherwise you get penalties. This is the most important thing.

If you don't need a standard-compliant solution, you could check if things improve by using some compiler specific extension such as memcpy64 (check with your compiler doc if there's something available). Fact is that memcpymust be able to deal with single byte copy, but moving 4 or 8 bytes at a time is much faster if you don't have this restriction.

Again, is it an option for you to write inline assembly code?

回答6:

Perhaps you can explain some more about how you're processing the larger memory area?

Would it be possible within your application to simply pass ownership of the buffer, rather than copy it? This would eliminate the problem altogether.

Or are you using memcpy for more than just copying? Perhaps you're using the larger area of memory to build a sequential stream of data from what you've captured? Especially if you're processing one character at a time, you may be able to meet halfway. For example, it may be possible to adapt your processing code to accommodate for a stream represented as ‘an array of buffers’, rather than ‘a continuous memory area’.

回答7:

You can write a better implementation of memcpy using SSE2 registers. The version in VC2010 does this already. So the question is more, if you are handing it aligned memory.

Maybe you can do better then the version of VC 2010, but it does need some understanding, of how to do it.

PS: You can pass the buffer to the user mode program in an inverted call, to prevent the copy altogether.

回答8:

One source I would recommend you read is MPlayer's fast_memcpy function. Also consider the expected usage patterns, and note that modern cpus have special store instructions which let you inform the cpu whether or not you will need to read back the data you're writing. Using the instructions that indicate you won't be reading back the data (and thus it doesn't need to be cached) can be a huge win for large memcpy operations.

来源：https://stackoverflow.com/questions/4260602/how-to-increase-performance-of-memcpy

标签

visual-studio

memcpy

cvi

memory-bandwidth