WebRTC AGC (Automatic Gain Control)

问题

I am testing the WebRTC AGC but I must be doing something wrong because the signal just passes through unmodified.

Here's how I create and initialize the AGC:

agcConfig.compressionGaindB = 9;
agcConfig.limiterEnable = 1;
agcConfig.targetLevelDbfs = 9;   /* 9dB below full scale */

WebRtcAgc_Create(&agc);
WebRtcAgc_Init(agc, minLevel, maxLevel, kAgcModeFixedDigital, 8000);
WebRtcAgc_set_config(agc, agcConfig);

And then for each 10ms sample block I do the following:

WebRtcAgc_Process(agc, micData, NULL, 80, micData, NULL, micLevelIn, &micLevelOut, 0, &saturationWarning);

Where micLevelIn is set to 0.

Can somebody tell me what I'm doing wrong?

I expected that a full scale sine tone would be attenuated to the target DBFS level; and a low level sine tone (i.e. -30dBFS) would be amplified to match the target DBFS level. But that's not what I'm seeing.

回答1:

Here is the sequence of operations to be used for Webrtc_AGC:

Create AGC: WebRtcAgc_Create
Initialize AGC: WebRtcAgc_Init
Set Config: WebRtcAgc_set_config
Initialize capture_level = 0
For kAgcModeAdaptiveDigital, invoke VirtualMic: WebRtcAgc_VirtualMic
Process Buffer with capture_level: WebRtcAgc_Process
Get the out capture level returned from WebRtcAgc_Process and set it to capture_level
Repeat 5 to 7 for the audio buffers
Destroy the AGC: WebRtcAgc_Free

Check webrtc/modules/audio_processing/gain_control_impl.cc for reference.

回答2:

Try this:


    agcConfig.compressionGaindB = 9;
    agcConfig.limiterEnable = 1;
    agcConfig.targetLevelDbfs = 9;   /* 9dB below full scale */

    WebRtcAgc_Create(&agc);
    WebRtcAgc_Init(&agc, minLevel, maxLevel, kAgcModeFixedDigital, 8000);
    WebRtcAgc_set_config(&agc, &agcConfig);

来源：https://stackoverflow.com/questions/22706446/webrtc-agc-automatic-gain-control

标签

c++

signal-processing

webrtc