Adjust audio volume level with CLI omxplayer - Raspberry Pi

问题

I have a bash script that plays .mp3 files on my Raspberry Pi via omxplayer. But can not control the local (earphone) audio volume with the GUI. Is there a command for the CLI that I can implement in the bash script? I have searched quite a bit, but can not find such a command.

Code:

omxplayer Song_Title.mp3

Set audio for local (earphone) output:

sudo modprobe snd_bcm2835 sudo amixer cset numid=3 1

omxplayer -o local

Thanks!

回答1:

to provide more precise information for playing through scripts, there are 3 ways to change sound volume in current version of omxplayer, and values are not so intuitive:

on starting command line, param --vol YYY, double millibels, default 0, range [-6000:0]
by stdin interface, sending +/- to omxplayer will increase/decrease volume for 300 dmbels
with DBUS interface, cmd 'set volume', value double:XXX, default 1, range [0:1]

xxx to yyy relation is: XXX = 10 ^ (YYY / 2000) ... according to omxplayer.cpp source code, reverse formula would be: YYY = 2000 * (log XXX).

so if we need:

volume 1%, XXX=0.01 and YYY=-4000 (10^(-4000/2000)=10^-2=0.01
volume 10%, XXX=0.1 and YYY=-2000 (10^(-2000/2000)=10^-1=0.1
volume 50%, XXX=0.5 and YYY=-602 (10^(-602/2000))~=0.5
volume 100%, XXX=1 and YYY=0 (10^(0/2000)=10^0=1)
volume 150%, XXX=1.5 and YYY=352 ... (for boost test, normal values are <=100%)

working bash script for dbus volume command:

export DBUS_SESSION_BUS_ADDRESS=$(cat /tmp/omxplayerdbus.${USER:-root})
dbus-send --print-reply --session --reply-timeout=500 \
           --dest=org.mpris.MediaPlayer2.omxplayer \
           /org/mpris/MediaPlayer2 org.freedesktop.DBus.Properties.Set \
           string:"org.mpris.MediaPlayer2.Player" \
           string:"Volume" double:0.5   # <-- XXX=0.5 (50% sound volume)

equals to volume parameter at startup:

omxplayer --vol -602 mediaFileName.mp4

... both sets sound volume to 50%.

回答2:

I am not sure how to adjust the volume level with a command. But when using the omxplayer CLI, just press - or + to turn the volume up or down.

回答3:

You can set the initial volume by adding the option --vol:

omxplayer --vol N Sogn_title.mp3

Where N is a number indicating the millibels. Valid values for N are for example:

5000 (increase the volume)

-15000 (decrease the volume)

回答4:

In Raspberry Pi 3, I was able to adjust audio volume through alsamixer.

In the command line type

alsamixer

you will see

Just use up or down arrow to increase or decrease volume. Press Esc. Volume is set.

回答5:

Omxplayer doesn't use alsa for sound output, but it's possible to use stdin interface

Volume up:

echo -n "+" > /proc/$(pidof omxplayer.bin)/fd/0

Volume down:

echo -n "-" > /proc/$(pidof omxplayer.bin)/fd/0

来源：https://stackoverflow.com/questions/33162820/adjust-audio-volume-level-with-cli-omxplayer-raspberry-pi

标签

Linux

bash

raspberry-pi2

omxplayer