Unable to send SMS using AT Commands

问题

I am using QextSerialPort to access ports

#include <qstring.h>
#include <qdebug.h>
#include <QCoreApplication>



int main(int argc, char *argv[])
{
    QCoreApplication a(argc, argv);

    QList<QextPortInfo> ports = QextSerialEnumerator::getPorts();
    QextSerialPort *port;
    QString portName;

    int counter=0;

    //Navigate through ports untill you find huwawei USB dongle
    while(counter<ports.size())
    {
     portName = ports[counter].portName;
    QString productId= ports[counter].productID;
    QString physicalName = ports[counter].physName;
    QString vendorId = ports[counter].vendorID;
    QString friendName = ports[counter].friendName;


    string convertedPortName = portName.toLocal8Bit().constData();
    string convertedProductId = productId.toLocal8Bit().constData();
    string convertedPhysicalName = physicalName.toLocal8Bit().constData();
    string convertedVendorId = vendorId.toLocal8Bit().constData();
    string convertedFriendName = friendName.toLocal8Bit().constData();

    cout << "Port Name: " << convertedPortName << endl;
    cout << "Product ID:" << convertedProductId << endl;
    cout << "Physical Name: " << convertedPhysicalName << endl;
    cout << "Vendor Id: " << convertedVendorId << endl;
    cout << "Friend Name: " << convertedFriendName << endl;
    cout << endl;
    counter++;


    //Break if you found Huwawei USB dongle, assign the port to a new port

    if (std::string::npos != convertedFriendName.find("HUAWEI Mobile Connect - 3G Modem"))
    {
      std::cout << "found!" << std::endl;
      port = new QextSerialPort(portName);
      break;
    }
    }


    //Write and send the SMS
    port->open(QIODevice::ReadWrite) ;
    cout << port->isOpen() << endl;
    port->write("AT+CFUN=1");
    port->write("AT+CMGF=1 ");
    port->write("AT+CMGS=1234567");
    port->write("Hello Test SMS");
    //port->write("0x1A");
    port->flush();

    port->close();
    cout << port->isOpen() << endl;

    system("pause");
    return 0;

}

In this code, I am trying to send SMS using AT commands. My dongle is a Huawei USB dongle. It's known as "MegaFone Modem" anyway.

In my code, I am unable to send any SMS actually. Why is that? Please note you have to edit the phone number when you run this code. I am very new to QT, USB Programming and AT commands. I even don't know whether I am accessing the correct port, because there are 3 ports belong to Huawei. My output is as follows.

UPDATE

#include <qstring.h>
#include <qdebug.h>
#include <QCoreApplication>



int main(int argc, char *argv[])
{
    QCoreApplication a(argc, argv);

    QList<QextPortInfo> ports = QextSerialEnumerator::getPorts();
    QextSerialPort *port;
    QString portName;

    int counter=0;

    //Navigate through ports untill you find huwawei USB dongle
    while(counter<ports.size())
    {
     portName = ports[counter].portName;
    QString productId= ports[counter].productID;
    QString physicalName = ports[counter].physName;
    QString vendorId = ports[counter].vendorID;
    QString friendName = ports[counter].friendName;


    string convertedPortName = portName.toLocal8Bit().constData();
    string convertedProductId = productId.toLocal8Bit().constData();
    string convertedPhysicalName = physicalName.toLocal8Bit().constData();
    string convertedVendorId = vendorId.toLocal8Bit().constData();
    string convertedFriendName = friendName.toLocal8Bit().constData();

    cout << "Port Name: " << convertedPortName << endl;
    cout << "Product ID:" << convertedProductId << endl;
    cout << "Physical Name: " << convertedPhysicalName << endl;
    cout << "Vendor Id: " << convertedVendorId << endl;
    cout << "Friend Name: " << convertedFriendName << endl;
    cout << endl;
    counter++;


    //Break if you found Huwawei USB dongle, assign the port to a new port

    if (std::string::npos != convertedFriendName.find("HUAWEI Mobile Connect - 3G Modem"))
    {
      std::cout << "found!" << std::endl;
      port = new QextSerialPort(portName);
      break;
    }
    }


    //Write and send the SMS
    port->open(QIODevice::ReadWrite) ;
    cout << port->isOpen() << endl;
    port->write("AT+CFUN=1\n");
    cout << "\n";
    port->write("AT+CMGF=1 \n ");
    cout << "\n";
    port->write("AT+CMGS=0776255495\n");
    cout << "\n";
    port->write("Hello Test SMS\n");
    cout << "\n";
    //port->write("0x1A");
    port->flush();

    port->close();
    cout << port->isOpen() << endl;

    system("pause");
    return 0;

}

回答1:

Your problem is the following:

port->write("AT+CFUN=1");
port->write("AT+CMGF=1 ");
port->write("AT+CMGS=1234567");
port->write("Hello Test SMS");

Always after sending a AT command line to the modem, you MUST wait for the final result code (e.g. typically OKor ERROR although there are some more, and you must be prepared to handle all of them. For an example of how to wait for final result codes, you can look at the source code of atinout, which is a tiny program for reading a list of AT commands, send them to the modem and print the responses).

Because without waiting the following command will abort the currently executing command. Abortion of AT commands is defined in section "5.6.1 Aborting commands" in V.250. If you have little experience with handling AT commands, that specification is a must read. Also you would do well in reading 27.005 for the +CMG... commands you use. You find links to the specifications on the at-command tag information.

For AT+CMGS specifically you must also wait for "\r\n> " before sending the text, see my other answer.

来源：https://stackoverflow.com/questions/16402403/unable-to-send-sms-using-at-commands