toolchain

QtCreator on Windows to Cross Compile for Linux ARM with CodeSourcery Toolchain

不想你离开。 提交于 2019-11-30 17:05:54
问题 I have Qt Creator installed on my Windows 7 machine and my target is an OMAP3 Embedded Linux board. I downloaded the target toolchain, Sourcery-G++ Lite for Windows, and also installed MinGW ( http://www.mingw.org/ ) on my Windows Machine. In QT Creator I added the CodeSourcery toolchain as a 'Manual' toolchain as shown in the image below. Then, I tried to build the demo Qt App 'analogclock' using this toolchain by editing 'Build Settings' under 'Projects' for the 'analogclock' demo app. But

What's the use of LLVM in Android NDK Toolchains?

断了今生、忘了曾经 提交于 2019-11-30 14:16:50
What's the use of LLVM in Android NDK Toolchains? A little recap: I was building my native project with Gradlew on Ubuntu, targeting arm and x86_64 architectures. Seems that LLVM were utilized to call C/C++ compiler of arm-linux-androideabi-4.9 as well as x86_64 (?) The following is extracted from armeabi-v7a/ndkBuild_build_output.log: /home/mypc/Android/android-ndk-r17c/toolchains/llvm/prebuilt/linux-x86_64/bin/clang++ -MMD -MP -MF /home/mypc/git/android-project-1/build/intermediates/ndkBuild/debug/obj/local/armeabi-v7a/objs-debug/module-5/stream_cpp.o.d -gcc-toolchain /home/mypc/Android

checking for suffix of object files… configure: error: cannot compute suffix of object files: cannot compile

狂风中的少年 提交于 2019-11-30 13:27:17
While building ARM toolchain , I got the following error checking for suffix of object files... configure: error: cannot compute suffix of object files: cannot compile See `config.log' for more details. make[1]: *** [configure-target-libgcc] Error 1 make[1]: Leaving directory `<path>/gcc-4.3.2-arm-elf' make: *** [all] Error 2 what might be the problem? Did you read http://gcc.gnu.org/wiki/FAQ#configure_suffix ? Have you installed GMP, MPFR and MPC? Are they in your library search path? See http://gcc.gnu.org/wiki/InstallingGCC and make sure you've followed the basic instructions. By far the

How to get a smaller toolchain from scratch?

妖精的绣舞 提交于 2019-11-30 08:53:01
问题 I have built a custom toolchain from scratch for a MIPS 24kc (dragino) target platform, using gcc-6.3.0, musl-1.1.16 and binutils-2.27. That toolchain is completely functional. However, the size of my-custom toolchain is five times bigger than size of equivalent OpenWRT generated toolchain (557M vs 113M). Toolchain binaries generated by OpenWRT (mips-openwrt-linux-musl-*) are dynamically linked against libstdc++ and libgcc_s libraries. However, my toolchain binaries are linked with these libs

Building a toolchain with cmake to cross-compile for android

我只是一个虾纸丫 提交于 2019-11-29 21:49:57
gcc (GCC) 4.8.1 android-ndk-r9 Hello, My host machine is Fedora 19 and I want to create a tool-chain for compiling programs to run on android, later I want to extend this for iOS. I get the following error: Check for working C compiler: /opt/ndk/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc -- broken I am not sure why I am getting this error, as everything has been installed. I have also installed binutils-arm-linux-gnu . However, this is my first time do this type of thing, so many I have got something mixed up. I am trying to create a toolchain file

How to build android standalone toolchain in windows 7

醉酒当歌 提交于 2019-11-29 11:31:02
I am trying to build standalone toolchain using ndk 8 for mips by following "docs\STANDALONE-TOOLCHAIN.html" but when I run following command "make-standalone-toolchain.sh --platform=android-14 --install-dir=/tmp/my-android-toolchain" in command prompt I got following errors E:\Installed_SDKs\android-ndk-r8\build\tools>make-standalone-toolchain.sh --plat form=android-14 --arch=mips --install-dir=./mytool Welcome to Git (version 1.7.9-preview20120201) Run 'git help git' to display the help index. Run 'git help <command>' to display help for specific commands. expr: syntax error expr: syntax

How to get a smaller toolchain from scratch?

泄露秘密 提交于 2019-11-29 08:45:52
I have built a custom toolchain from scratch for a MIPS 24kc (dragino) target platform, using gcc-6.3.0, musl-1.1.16 and binutils-2.27. That toolchain is completely functional. However, the size of my-custom toolchain is five times bigger than size of equivalent OpenWRT generated toolchain (557M vs 113M). Toolchain binaries generated by OpenWRT (mips-openwrt-linux-musl-*) are dynamically linked against libstdc++ and libgcc_s libraries. However, my toolchain binaries are linked with these libs statically: $ ldd mips-openwrt-linux-musl-gcc-5.3.0 linux-vdso.so.1 => (0x00007ffc4d534000) libstdc++

Advice regarding installing ARM toolchain on Ubuntu VM (64bit)

删除回忆录丶 提交于 2019-11-29 07:46:42
Trying to compile Linux kernel for arm platform on a Ubuntu virtual machine $make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- It fails as follows arm-none-linux-gnueabi-gcc: not found Tried to install $sudo apt-get install arm-none-linux-gnueabi-gcc E: unable to locate package arm-none-linux-gnueabi-gcc Where to find the correct package? how to include it in the system? (I found a couple of links on line that didn't work for me). It would be great if you could provide a correct solution or reference. vinay hunachyal Download arm-2013.05-24-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2

How to cross-compile for MIPS?

杀马特。学长 韩版系。学妹 提交于 2019-11-29 01:39:16
I have a DVB receiver ( set-top box ) similar like Dreambox and it has MIPS cpu It has embedded Linux and I can connect to it with telnet Question is how to compile simple " Hello World " application in C ? Where to get toolchain , SDK ? MannyNS You should use Codescape SDK . http://www.linux-mips.org/wiki/Toolchains There you have some prebuilt cross compilers, or the instruction to build GCC as a cross compiler. 来源: https://stackoverflow.com/questions/5291190/how-to-cross-compile-for-mips

Building a toolchain with cmake to cross-compile for android

泪湿孤枕 提交于 2019-11-28 17:43:50
问题 gcc (GCC) 4.8.1 android-ndk-r9 Hello, My host machine is Fedora 19 and I want to create a tool-chain for compiling programs to run on android, later I want to extend this for iOS. I get the following error: Check for working C compiler: /opt/ndk/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc -- broken I am not sure why I am getting this error, as everything has been installed. I have also installed binutils-arm-linux-gnu . However, this is my first