checkpoint

In tensorflow the training from the scratch produced following 6 files: events.out.tfevents.1503494436.06L7-BRM738 model.ckpt-22480.meta checkpoint model.ckpt-22480.data-00000-of-00001 model.ckpt-22480.index graph.pbtxt I would like to convert them (or only the needed ones) into one file graph.pb to be able to transfer it to my Android application. I tried the script freeze_graph.py but it requires as an input already the input.pb file which I do not have. (I have only these 6 files mentioned before). How to proceed to get this one freezed_graph.pb file? I saw several threads but none was

This lab is an example for a typical VSX Deployment scenario – one shared external Interface to Internet and separate Internal interfaces for each VSX virtual firewall. This lab also is second part of earlier post : Creating Checkpoint VSX and Virtual System – Part 1 In that previous post, it already shows how to create a new VSX gateway through SmartConsole. This lab will show the steps how to create two VSX virtual firewalls and how to set up a virtual router. Two internal interfaces will be used to test the traffics from two different networks. Topologies: Basically, in this lab, there is

This is the third part of Checkpoint SSL VPN Series LAB. Part 1: Enable Checkpoint SSL VPN Remote Access: Step by Step Instruction Part 1 (Local User Authentication) Part 2: Enable Checkpoint SSL VPN Remote Access: Step by Step Instruction Part 2 (AD Authentication) Part 3: Enable Checkpoint SSL VPN Remote Access: Step by Step Instruction Part 3 (Certs and Two Factor Authentication) Part 4: Enable Checkpoint SSL VPN Remote Access: Step by Step Part 4 – Two Factor Authentication (AD and SMS) In this part, it will introduce how to use Checkpoint Internal CA issued Certs and how to enable two

Part 1: Enable Checkpoint SSL VPN Remote Access: Step by Step Instruction Part 1 (Local User Authentication) Part 2: Enable Checkpoint SSL VPN Remote Access: Step by Step Instruction Part 2 (AD Authentication) Part 3: Enable Checkpoint SSL VPN Remote Access: Step by Step Instruction Part 3 (Certs and Two Factor Authentication) Part 4: Enable Checkpoint SSL VPN Remote Access: Step by Step Part 4 – Two Factor Authentication (AD and SMS) Check Point has a Mobile Access Blade to provide the SSL VPN featured solution to remote users. In this lab, it will show the step by step instruction with

Part 1: Enable Checkpoint SSL VPN Remote Access: Step by Step Instruction Part 1 (Local User Authentication) Part 2: Enable Checkpoint SSL VPN Remote Access: Step by Step Instruction Part 2 (AD Authentication) Part 3: Enable Checkpoint SSL VPN Remote Access: Step by Step Instruction Part 3 (Certs and Two Factor Authentication) Part 4: Enable Checkpoint SSL VPN Remote Access: Step by Step Part 4 – Two Factor Authentication (AD and SMS) In previous lab Part 1 “ Enable Checkpoint SSL VPN Remote Access: Step by Step Instruction Part 1 (Local User Authentication) “, it shows the first part how to

When Gaia released at R75.40 on 2012, our Checkpoint firewalls have been adopted it right away with an upgrade. Since then we have upgraded to R77.10, R77.20 and recently planing to R77.30. The new version’s experience was quite good, but just recently we are starting to feel the Gaia CLI and Porttal is getting slower and slower. Symptoms: For example, the ssh login process is taking a couple of minutes to show the prompt. WebUi is consistently showing lost database connection when saving any changes. You will have to re-login again to WebUI. SNMP Monitoring shows your device is up and

1. Enable SFTP on Checkpoint either SPLAT or Gaia By default, there is no SFTP access to Checkpoint OS either SPLAT or Gaia. But there is always a way to enable it manually. Here is a listed steps to do it from Gaia command line 1.1. Enter into Expert Mode 1.2. Enable an account to have bash access chsh -s /bin/bash admin 1.3. E dit the SSHD configuration file in Vi editor: [ [email protected] ]# vi /etc/ssh/sshd_config 1.4. At the almost end of sshd_config file, uncomment the ‘ Subsystem sftp /usr/libexec/openssh/sftp-server ‘ line by deleting the pound ‘#’ character: # override default of no

There are different Gaia version released already by Checkpoint. From Clish , using “show version all” to check version build number: CP> show version all Product version Check Point Gaia R75.40 OS build 338 OS kernel version 2.6.18-92cp OS edition 32-bit So far, there are following version we know: latest EA: 264 GA: 338 2nd GA: 339 GAIA+: 65 GAIA+: 123 Gaia+ version provides more feature and functions than Gaia. One of difference is the way to do configuration backup. 1. In Gaia version, browser does not provide the ability to execute backup from GUI interface. Command line is “add backup

After rebooted one of cluster member, I found it lost the connection to Management Server for somehow. SIC, SSH, GUI all are not working anymore. Through Console, I could log into firewall and found this: [ [email protected] ]# cpconfig cpinst Error: Host name resolution for CP-FW-2 failed. Local host name resolution is required for normal Check Point Security Gateway operation Please correct this error and run cpstart again: Add an entry for CP-FW-2 in /etc/hosts Since it mentioned /etc/hosts file, based on previous experience, I opened the hosts file to check. [ [email protected] ]# cat /etc

Check Point Management Server is not only the central policy management place for Check Point products, but also holds all Check Point gateways logs. In real environment, external third party log servers sometimes will need to be used to store and analyse those logs, especially for central SIEM systems. Before R77.30, you will have to forward those logs from Management server to external syslog servers. Two previous posts have been recorded in this blog to describe the procedures how to forward Check Point logs from Management Server to external syslog server: Forwarding Checkpoint Management