问题
I have a MIFARE 1K tag. Some blocks can be written/read using authentication key A, while other block can be written using authentication key B. Why? How can I change all blocks to be written/read, for example, with key A?
For example, I can write the key block 07 using key A, and I can also change the key A for this key block, but I can't write on it using key B, and I can't change the key B for this key block.
Why should I write/read using key A instead of key B? What's the difference?
回答1:
Each sector of a MIFARE Classic card has two authentication keys: key A and key B. These two keys together with access conditions are stored in the last block of each sector (the so-called sector trailer). The sector trailer looks like this:
+-----------------------------+--------------+----+-----------------------------+
| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
+-----------------------------+--------------+----+-----------------------------+
| Key A | Access Conditions | Key B |
| (6 bytes) | (4 bytes) | (6 bytes) |
+-----------------------------+--------------+----+-----------------------------+
The access conditions define how you can access the blocks in the sector:
- the commands you can issue after authenticating with key A (read, write, value block operations),
- the commands you can issue after authenticating with key B (read, write, value block operations),
- if key B is used as an authentication key at all.
Typical scenarios are:
- Authentication is only possible with key A. Key A has read-only access.
- Authentication is only possible with key A. Key A has read/write access.
- Authentication is possible with both keys. Key A has read-only access. Key B has read/write access.
- Authentication is possible with both keys. Key A and B have read-only access.
You can find a full description of the possible access conditions in the MIFARE datasheet.
来源：https://stackoverflow.com/questions/28050718/mifare-1k-authentication-keys