NSURLConnection and Basic HTTP Authentication in iOS

I need to invoke an initial GET HTTP request with Basic Authentication. This would be the first time the request is sent to the server and I already have the username & password so there's no need for a challenge from the server for authorization.

First question:

Does NSURLConnection have to be set as synchronous to do Basic Auth? According to the answer on this post, it seems that you can't do Basic Auth if you opt for the async route.
Anyone know of any some sample code that illustrates Basic Auth on a GET request without the need for a challenge response? Apple's documentation shows an example but only after the server has issued the challenge request to the client.

I'm kind of new the networking portion of the SDK and I'm not sure which of the other classes I should use to get this working. (I see the NSURLCredential class but it seems that it is used only with NSURLAuthenticationChallenge after the client has requested for an authorized resource from the server).

I'm using an asynchronous connection with MGTwitterEngine and it sets the authorization in the NSMutableURLRequest (theRequest) like so:

NSString *authStr = [NSString stringWithFormat:@"%@:%@", [self username], [self password]];
NSData *authData = [authStr dataUsingEncoding:NSASCIIStringEncoding];
NSString *authValue = [NSString stringWithFormat:@"Basic %@", [authData base64EncodingWithLineLength:80]];
[theRequest setValue:authValue forHTTPHeaderField:@"Authorization"];

I don't believe this method requires going through the challenge loop but I could be wrong

Even the question is answered, I want to present the solution, which doesn't require external libs, I found in another thread:

// Setup NSURLConnection
NSURL *URL = [NSURL URLWithString:url];
NSURLRequest *request = [NSURLRequest requestWithURL:URL
                                         cachePolicy:NSURLRequestUseProtocolCachePolicy
                                     timeoutInterval:30.0];

NSURLConnection *connection = [[NSURLConnection alloc] initWithRequest:request delegate:self];
[connection start];
[connection release];

// NSURLConnection Delegates
- (void)connection:(NSURLConnection *)connection didReceiveAuthenticationChallenge:(NSURLAuthenticationChallenge *)challenge {
    if ([challenge previousFailureCount] == 0) {
        NSLog(@"received authentication challenge");
        NSURLCredential *newCredential = [NSURLCredential credentialWithUser:@"USER"
                                                                    password:@"PASSWORD"
                                                                 persistence:NSURLCredentialPersistenceForSession];
        NSLog(@"credential created");
        [[challenge sender] useCredential:newCredential forAuthenticationChallenge:challenge];
        NSLog(@"responded to authentication challenge");    
    }
    else {
        NSLog(@"previous authentication failure");
    }
}

- (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response {
    ...
}

- (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data {
    ...
}

- (void)connectionDidFinishLoading:(NSURLConnection *)connection {
    ...
}

- (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error {
    ...
}

Here is a detailed answer with no 3rd party involved:

Please check here:

//username and password value
NSString *username = @“your_username”;
NSString *password = @“your_password”;

//HTTP Basic Authentication
NSString *authenticationString = [NSString stringWithFormat:@"%@:%@", username, password]];
NSData *authenticationData = [authenticationString dataUsingEncoding:NSASCIIStringEncoding];
NSString *authenticationValue = [authenticationData base64Encoding];

//Set up your request
NSMutableURLRequest *request = [[NSMutableURLRequest alloc] initWithURL:[NSURL URLWithString:@"http://www.your-api.com/“]];

// Set your user login credentials
[request setValue:[NSString stringWithFormat:@"Basic %@", authenticationValue] forHTTPHeaderField:@"Authorization"];

// Send your request asynchronously
[NSURLConnection sendAsynchronousRequest:request queue:[NSOperationQueue mainQueue] completionHandler:^(NSURLResponse *responseCode, NSData *responseData, NSError *responseError) {
      if ([responseData length] > 0 && responseError == nil){
            //logic here
      }else if ([responseData length] == 0 && responseError == nil){
             NSLog(@"data error: %@", responseError);
             UIAlertView *alert = [[UIAlertView alloc] initWithTitle:nil message:@"Error accessing the data" delegate:nil cancelButtonTitle:@"Close" otherButtonTitles:nil];
             [alert show];
             [alert release];
      }else if (responseError != nil && responseError.code == NSURLErrorTimedOut){
             NSLog(@"data timeout: %@”, NSURLErrorTimedOut);
             UIAlertView *alert = [[UIAlertView alloc] initWithTitle:nil message:@"connection timeout" delegate:nil cancelButtonTitle:@"Close" otherButtonTitles:nil];
             [alert show];
             [alert release];
      }else if (responseError != nil){
             NSLog(@"data download error: %@”,responseError);
             UIAlertView *alert = [[UIAlertView alloc] initWithTitle:nil message:@"data download error" delegate:nil cancelButtonTitle:@"Close" otherButtonTitles:nil];
             [alert show];
             [alert release];
      }
}]

Kindly let me know your feedback on this.

Thanks

If you don't want to import the whole of MGTwitterEngine and you aren't doing an asynchronous request Then you can use http://www.chrisumbel.com/article/basic_authentication_iphone_cocoa_touch

To base64 encode the Username and password So replace

NSString *authValue = [NSString stringWithFormat:@"Basic %@", [authData base64EncodingWithLineLength:80]];

with

NSString *encodedLoginData = [Base64 encode:[loginString dataUsingEncoding:NSUTF8StringEncoding]];

after

you will need to include the following file

static char *alphabet = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";

@implementation Base64
+(NSString *)encode:(NSData *)plainText {
    int encodedLength = (((([plainText length] % 3) + [plainText length]) / 3) * 4) + 1;
    unsigned char *outputBuffer = malloc(encodedLength);
    unsigned char *inputBuffer = (unsigned char *)[plainText bytes];

    NSInteger i;
    NSInteger j = 0;
    int remain;

    for(i = 0; i < [plainText length]; i += 3) {
        remain = [plainText length] - i;

        outputBuffer[j++] = alphabet[(inputBuffer[i] & 0xFC) >> 2];
        outputBuffer[j++] = alphabet[((inputBuffer[i] & 0x03) << 4) | 
                                     ((remain > 1) ? ((inputBuffer[i + 1] & 0xF0) >> 4): 0)];

        if(remain > 1)
            outputBuffer[j++] = alphabet[((inputBuffer[i + 1] & 0x0F) << 2)
                                         | ((remain > 2) ? ((inputBuffer[i + 2] & 0xC0) >> 6) : 0)];
        else 
            outputBuffer[j++] = '=';

        if(remain > 2)
            outputBuffer[j++] = alphabet[inputBuffer[i + 2] & 0x3F];
        else
            outputBuffer[j++] = '=';            
    }

    outputBuffer[j] = 0;

    NSString *result = [NSString stringWithCString:outputBuffer length:strlen(outputBuffer)];
    free(outputBuffer);

    return result;
}
@end

Since NSData::dataUsingEncoding is deprecated (ios 7.0), you could use this solution:

// Forming string with credentials 'myusername:mypassword'
NSString *authStr = [NSString stringWithFormat:@"%@:%@", username, password];
// Getting data from it
NSData *authData = [authStr dataUsingEncoding:NSASCIIStringEncoding];
// Encoding data with base64 and converting back to NSString
NSString* authStrData = [[NSString alloc] initWithData:[authData base64EncodedDataWithOptions:NSDataBase64EncodingEndLineWithLineFeed] encoding:NSASCIIStringEncoding];
// Forming Basic Authorization string Header
NSString *authValue = [NSString stringWithFormat:@"Basic %@", authStrData];
// Assigning it to request
[request setValue:authValue forHTTPHeaderField:@"Authorization"];

If you are using GTMHTTPFetcher for your connection, basic authentication is fairly easy as well. You simply need to provide the credential to the fetcher before beginning the fetch.

NSString * urlString = @"http://www.testurl.com/";
NSURL * url = [NSURL URLWithString:urlString];
NSMutableURLRequest * request = [NSMutableURLRequest requestWithURL:url];

NSURLCredential * credential = [NSURLCredential credentialWithUser:@"username" password:@"password" persistence:NSURLCredentialPersistenceForSession];

GTMHTTPFetcher * gFetcher = [GTMHTTPFetcher fetcherWithRequest:request];
gFetcher.credential = credential;

[gFetcher beginFetchWithDelegate:self didFinishSelector:@selector(fetchCompleted:withData:andError:)];

Can you tell me what's the reason behind limiting the encoding line length to 80 in your example code? I thought that HTTP headers have a max length of something like 4k (or maybe some servers don't take anything longer than that). – Justin Galzic Dec 29 '09 at 17:29

It is not limiting to 80, it is an option of the method base64EncodingWithLineLength in NSData+Base64.h/m, where you can split your encoded string into multiple lines, which is useful for other application, such as nntp transmission. I believe 80 is chosen by the twitter engine author to be a length big enough to accommodate most user/password encoded result to one line.

You can use AFNetworking (it is opensource), here is code that worked for me. This code sends file with basic authentication. Just change url, email and password.

NSString *serverUrl = [NSString stringWithFormat:@"http://www.yoursite.com/uploadlink", profile.host];
NSMutableURLRequest *request = [[AFHTTPRequestSerializer serializer] requestWithMethod:@"POST" URLString:serverUrl parameters:nil error:nil];


NSURLSessionConfiguration *configuration = [NSURLSessionConfiguration defaultSessionConfiguration];
AFURLSessionManager *manager = [[AFURLSessionManager alloc] initWithSessionConfiguration:configuration];

// Forming string with credentials 'myusername:mypassword'
NSString *authStr = [NSString stringWithFormat:@"%@:%@", email, emailPassword];
// Getting data from it
NSData *authData = [authStr dataUsingEncoding:NSASCIIStringEncoding];
// Encoding data with base64 and converting back to NSString
NSString* authStrData = [[NSString alloc] initWithData:[authData base64EncodedDataWithOptions:NSDataBase64EncodingEndLineWithLineFeed] encoding:NSASCIIStringEncoding];
// Forming Basic Authorization string Header
NSString *authValue = [NSString stringWithFormat:@"Basic %@", authStrData];
// Assigning it to request
[request setValue:authValue forHTTPHeaderField:@"Authorization"];

manager.responseSerializer = [AFHTTPResponseSerializer serializer];

NSURL *filePath = [NSURL fileURLWithPath:[url path]];
NSURLSessionUploadTask *uploadTask = [manager uploadTaskWithRequest:request fromFile:filePath progress:^(NSProgress * _Nonnull uploadProgress) {
// This is not called back on the main queue.
// You are responsible for dispatching to the main queue for UI updates
     dispatch_async(dispatch_get_main_queue(), ^{
                //Update the progress view
                LLog(@"progres increase... %@ , fraction: %f", uploadProgress.debugDescription, uploadProgress.fractionCompleted);
            });
        } completionHandler:^(NSURLResponse *response, id responseObject, NSError *error) {
            if (error) {
                NSLog(@"Error: %@", error);
            } else {
                NSLog(@"Success: %@ %@", response, responseObject);
            }
        }];
[uploadTask resume];

来源：https://stackoverflow.com/questions/1973325/nsurlconnection-and-basic-http-authentication-in-ios

标签

ios

iphone

objective-c

nsurlconnection