Rpresentation in Rstudio - Make image fill out the whole screen

Question

Making an Rpresentation in Rstudio with knitr I have a slide with just one picture, which I want to fill out the whole screen/slide. How do I do that?

The second slide of the following .Rpres-document is set to 2000x2000 pixels but it still only fills a small area of the screen:

first slide
======


Slide with plot which I want to fill the whole screen
========================================================
title: false
```{r, echo=FALSE,out.height="2000px",out.width="2000px"}
plot(cars)
```

This is what I mean when I write that the picture does not "fill the whole screen", the red lines are drawn at parts of the screen which are not filled by the plot.

update november 2016

Choosing "HTML Slidy" when creating a new presentation in Rstudio Version 1.0.44, gives me easier control of the size. The following is close to what i wanted on a full HD resolution, and very simple to do:

---
title: "Untitled"
output: slidy_presentation
---

```{r setup, include=FALSE}
knitr::opts_chunk$set(echo = FALSE)
```

## 

```{r pressure, fig.height=10, fig.width=19}
plot(pressure)
```

Answer 1

Here's the way to set the overall presentation size: http://www.rstudio.com/ide/docs/presentations/displaying_and_distributing_presentations The default is quite small: 960 * 700.

The interaction between the figure sizes, output sizes, and presentation sizes is tricky and I'm not an expert, but this seems to work ok. After some messing around, this looked alright:

first slide
======
width: 1920
height: 1080

Slide with plot which I want to fill the whole screen
========================================================
title: false
```{r myplot,echo=FALSE,fig.width=8,fig.height=4.5,dpi=300,out.width="1920px",out.height="1080px"}
plot(cars)
```

Answer 2

You can find your screen size and use that to set the plot size using grDevices a = dev.size("px")

and then you can use that in your code.

Answer 3

knitr version: 1.16

RStudio version: 1.0.143

problem description: when knitr parses the R code, even if you set a custom css page width, the output an html file has a constant max-width: 940px;

knitr output :

max-width: 940px;

My css setting file

max-width: 2000px;

min-width: 700px;

knitr does recognise the custom css file, but it does not create an output according to my css settings. I know this because When I deliberately misspell the css file, knitr produces an error during output.

The solution that worked for me was to go to the file created by knitr and change by hand the max-width: 2000px; min-width: 700px;

Better solution would be of course to find the root of the problem in the knitr /pandoc program

Answer 4

Considering Andy's response, I restrained my output to 940px wide and obtained good results for both the RStudio fullscreen presentation and "View in Browser"

Adding to my setup block:

library(knitr)
opts_chunk$set(fig.width=8, fig.height=4.5, dpi=300, out.width="940px", out.height="529px")

If you use something like 1920 wide you will have issues when exporting to html or viewing in browser.