open read and close a file in 1 line of code

问题

Now I use:

pageHeadSectionFile = open(\'pagehead.section.htm\',\'r\')
output = pageHeadSectionFile.read()
pageHeadSectionFile.close()

But to make the code look better, I can do:

output = open(\'pagehead.section.htm\',\'r\').read()

When using the above syntax, how do I close the file to free up system resources?

回答1:

You don't really have to close it - Python will do it automatically either during garbage collection or at program exit. But as @delnan noted, it's better practice to explicitly close it for various reasons.

So, what you can do to keep it short, simple and explicit:

with open('pagehead.section.htm','r') as f:
    output = f.read()

Now it's just two lines and pretty readable, I think.

回答2:

Python Standard Library Pathlib module does what you looking for:

Path('pagehead.section.htm').read_text()

Don't forget to import Path:

jsk@dev1:~$ python3
Python 3.5.2 (default, Sep 10 2016, 08:21:44)
[GCC 5.4.0 20160609] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> from pathlib import Path
>>> (Path("/etc") / "hostname").read_text()
'dev1.example\n'

On Python 27 install backported pathlib or pathlib2

回答3:

Using CPython, your file will be closed immediately after the line is executed, because the file object is immediately garbage collected. There are two drawbacks, though:

In Python implementations different from CPython, the file often isn't immediately closed, but rather at a later time, beyond your control.
In Python 3.2 or above, this will throw a ResourceWarning, if enabled.

Better to invest one additional line:

with open('pagehead.section.htm','r') as f:
    output = f.read()

This will ensure that the file is correctly closed under all circumstances.

回答4:

No need to import any special libraries to do this.

Use normal syntax and it will open the file for reading then close it.

with open("/etc/hostname","r") as f: print f.read()

with open("/etc/hosts","r") as f: x = f.read().splitlines()

which gives you an array x containing the lines, and can be printed like so:

for line in x: print line

These one-liners are very helpful for maintenance - basically self-documenting.

回答5:

What you can do is to use the with statement, and write the two steps on one line:

>>> with open('pagehead.section.htm', 'r') as fin: output = fin.read();
>>> print(output)
some content

The with statement will take care to call __exit__ function of the given object even if something bad happened in your code; it's close to the try... finally syntax. For object returned by open, __exit__ corresponds to file closure.

This statement has been introduced with Python 2.6.

回答6:

use ilio: (inline io):

just one function call instead of file open(), read(), close().

from ilio import read

content = read('filename')

回答7:

with open('pagehead.section.htm')as f:contents=f.read()

回答8:

I think the most natural way for achieving this is to define a function.

def read(filename):
    f = open(filename, 'r')
    output = f.read()
    f.close()
    return output

Then you can do the following:

output = read('pagehead.section.htm')

回答9:

I frequently do something like this when I need to get a few lines surrounding something I've grepped in a log file:

$ grep -n "xlrd" requirements.txt | awk -F ":" '{print $1}'
54

$ python -c "with open('requirements.txt') as file: print ''.join(file.readlines()[52:55])"
wsgiref==0.1.2
xlrd==0.9.2
xlwt==0.7.5

回答10:

If you want that warm and fuzzy feeling just go with with.

For python 3.6 I ran these two programs under a fresh start of IDLE, giving runtimes of:

0.002000093460083008  Test A
0.0020003318786621094 Test B: with guaranteed close

So not much of a difference.

#--------*---------*---------*---------*---------*---------*---------*---------*
# Desc: Test A for reading a text file line-by-line into a list
#--------*---------*---------*---------*---------*---------*---------*---------*

import sys
import time

#                                  # MAINLINE
if __name__ == '__main__':
    print("OK, starting program...")

    inTextFile = '/Users/Mike/Desktop/garbage.txt'

#                                  # Test: A: no 'with;
    c=[]
    start_time = time.time()
    c = open(inTextFile).read().splitlines()
    print("--- %s seconds ---" % (time.time() - start_time))

    print("OK, program execution has ended.")
    sys.exit()                     # END MAINLINE

OUTPUT:

OK, starting program...
--- 0.002000093460083008 seconds ---
OK, program execution has ended.

#--------*---------*---------*---------*---------*---------*---------*---------*
# Desc: Test B for reading a text file line-by-line into a list
#--------*---------*---------*---------*---------*---------*---------*---------*

import sys
import time

#                                  # MAINLINE
if __name__ == '__main__':
    print("OK, starting program...")

    inTextFile = '/Users/Mike/Desktop/garbage.txt'

#                                  # Test: B: using 'with'
    c=[]
    start_time = time.time()
    with open(inTextFile) as D: c = D.read().splitlines()
    print("--- %s seconds ---" % (time.time() - start_time))

    print("OK, program execution has ended.")
    sys.exit()                     # END MAINLINE

OUTPUT:

OK, starting program...
--- 0.0020003318786621094 seconds ---
OK, program execution has ended.

回答11:

Using more_itertools.with_iter, it is possible to open, read, close and assign an equivalent output in one line (excluding the import statement):

import more_itertools as mit


output = "".join(line for line in mit.with_iter(open("pagehead.section.htm", "r")))

Although possible, I would look for another approach other than assigning the contents of a file to a variable, i.e. lazy iteration - this can be done using a traditional with block or in the example above by removing join() and iterating output.

来源：https://stackoverflow.com/questions/8011797/open-read-and-close-a-file-in-1-line-of-code

标签

python

readfile