问题
Using git 1.6.4.2, when I do a git pull I get this error:
error: unable to resolve reference refs/remotes/origin/LT558-optimize-sql: No such file or directory
From git+ssh://remoteserver/~/misk5
! [new branch] LT558-optimize-sql -> origin/LT558-optimize-sql (unable to update local ref)
error: unable to resolve reference refs/remotes/origin/split-css: No such file or directory
! [new branch] split-css -> origin/split-css (unable to update local ref)
I\'ve tried git remote prune origin, but it didn\'t help.
回答1:
Try cleaning-up your local repository with:
$ git gc --prune=now
$ git remote prune origin
man git-gc(1):
git-gc - Cleanup unnecessary files and optimize the local repository
git gc [--aggressive] [--auto] [--quiet] [--prune=<date> | --no-prune]
Runs a number of housekeeping tasks within the current repository, such as compressing file revisions
(to reduce disk space and increase performance) and removing unreachable objects which may have been
created from prior invocations of git add.
Users are encouraged to run this task on a regular basis within each repository to maintain good disk
space utilization and good operating performance.
man git-remote(1):
git-remote - manage set of tracked repositories
git remote prune [-n | --dry-run] <name>
Deletes all stale remote-tracking branches under <name>. These stale branches have already been
removed from the remote repository referenced by <name>, but are still locally available in
"remotes/<name>".
回答2:
Happened to me as well. In my case, the bad ref was master, and I did the following:
rm .git/refs/remotes/origin/master
git fetch
This made git restore the ref file. After that everything worked as expected again.
回答3:
This did the job for me:
git gc --prune=now
回答4:
For me, it worked to remove the files that are throwing errors from the folder .git/refs/remotes/origin/.
回答5:
Try it:
git gc --prune=now
git remote prune origin
git pull
回答6:
Execute the following commands:
rm .git/refs/remotes/origin/master
git fetch
git branch --set-upstream-to=origin/master
Just in case, if you need to know what is
.git/refs/remotes/origin/master, you would read the Remotes section in Git References.
回答7:
I had this same issue and solved it by going to the file it was erroring on:
\repo\.git\refs\remotes\origin\master
This file was full of nulls, I replaced it with the latest ref from github.
回答8:
In my case, the problem was solved after I've deleted all the remove reference files under the directory .git.
If you look at the message, it would tell you which files you need to delete (specifically).
The files to delete sit under .git/refs/remotes.
I've just deleted all the files there, and ran gc prune
git gc --prune=now
After that, everything works just fine.
回答9:
I just would like to add how it may happen that a reference breaks.
Possible root cause
On my system (Windows 7 64-bit), when a BSOD happens, some of the stored reference files (most likely currently opened/being written into when BSOD happened) are overwritten with NULL characters (ASCII 0).
As others mentioned, to fix it, it's enough to just delete those invalid reference files and re-fetch or re-pull the repository.
Example
Error: cannot lock ref 'refs/remotes/origin/some/branch': unable to resolve reference 'refs/remotes/origin/some/branch': reference broken
Solution: delete the file %repo_root%/.git/refs/remotes/origin/some/branch
回答10:
git fetch --prune fixed this error for me:
[marc.zych@marc-desktop] - [~/code/driving] - [Wed May 10, 02:58:25]
[I]> git fetch
error: cannot lock ref 'refs/remotes/origin/user/janek/integration/20170505': 'refs/remotes/origin/user/janek/integration' exists; cannot create 'refs/remotes/origin/user/janek/integration/20170505'
From github.com:zooxco/driving
! [new branch] user/janek/integration/20170505 -> origin/user/janek/integration/20170505 (unable to update local ref)
From github.com:zooxco/driving
[marc.zych@marc-desktop] - [~/code/driving] - [Wed May 10, 02:58:30]
[I]> git fetch --prune
- [deleted] (none) -> origin/user/janek/integration
This assumes that the offending branch was deleted on the remote, though.
回答11:
To Answer this in very short, this issue comes when your local has some information about the remote and someone changes something which makes remote and your changes unsync.
I was getting this issue because someone has deleted remote branch and again created with the same name.
For dealing with such issues, do a pull or fetch from remote.
git remote prune origin
or if you are using any GUI, do a fetch from remote.
回答12:
If git gc --prune=now dosen't help you. (bad luck like me)
What I did is remove the project in local, and re clone the whole project again.
回答13:
I was able to work with
git remote update --prune
回答14:
Try this:
git pull origin Branch_Name
Branch_Name, the branch which you are currently on.
If you do only a git pull, it pulls all other created branch name as well.
So is the reason you are getting this:
! [new branch] split-css -> origin/split-css (unable to update local ref)
回答15:
For me, I had a local branch named feature/phase2 and the remote branch was named feature/phase2/data-model. The naming conflict was the cause of the problem, so I deleted my local branch (you could rename it if it had anything you needed to keep)
回答16:
If this error “unable to update local ref” is reoccurring, even after applying either the answer by Vojtech Vitek or Michel Krämer you may you may have a bad ref on your local AND master repository.
In this case you should apply both fix's without pulling or pushing in between ...
rm .git/refs/remotes/origin/master
git fetch
git gc --prune=now
git remote prune origin
A permanent resolution for me was only achieved after applying both fix's before push/pull.
回答17:
I had same issue. i follow following steps
1)switch your branch which having issue to other branch
2) delete that branch
3) checkout again.
Note:- You can stash you uncommitted changes and put it back again.
回答18:
I used git prune origin and that did the work.
回答19:
Explanation: It appears your remote repo (in Github / bitbucket) branches were removed ,though your local references were not updated and pointing to non existent references.
In order to solve this issue:
git fetch --prune
git fetch --all
git pull
For extra reading - Reference from Github documentation :
git-fetch - Download objects and refs from another repository
--all Fetch all remotes.
--prune After fetching, remove any remote tracking branches which no longer exist on the remote.
回答20:
I had the same problem with composer update. But for me it only worked after I cleared the composer cache and after deleting the content of the vendor folder:
rm -rf vendor/*
git gc --prune=now
git pull
composer clear-cache
composer update my/package
回答21:
Got this issue when trying to clone from a git bundle created file, none of the other answers worked because I couldn't clone the repo (so git gc and removing/editing files was out of the question).
There was however another way to fix this - the source file of a .bundle file was begining with:
# v2 git bundle
9a3184e2f983ba13cc7f40a820df8dd8cf20b54d HEAD
9a3184e2f983ba13cc7f40a820df8dd8cf20b54d refs/heads/master
9a3184e2f983ba13cc7f40a820df8dd8cf20b54d refs/heads/master
PACK.......p..x...Kj.0...: (and so on...)
Simply removing the fourth line with vim fixed the issue.
回答22:
I had this issue while using SourceTree. I tried to pull again and it worked. I think I Was witching branches (checkout) too fast :).
My situation is a bit different from the poster's because my repository has been relatively cooperative, without any apparent corruption.
回答23:
# remove the reference file of the branch "lost"
rm -fv ./.git/refs/remotes/origin/feature/v1.6.9-api-token-bot-reader
# get all the branches from the master
git fetch --all
# git will "know" how-to handle the issue from now on
# From github.com:futurice/senzoit-www-server
# * [new branch] feature/v1.6.9-api-token-bot-reader ->
# origin/feature/v1.6.9-api-token-bot-reader
# and push your local changes
git push
回答24:
Faced the same issue when repository was deleted and created with the same name. It worked only when I re-set the remote url like below;
git remote set-url origin [GIT_REPO_URL]
Verify the remote url:
git remote -v
Now, all commands should work as usual.
回答25:
Just ran into the problem today.
Troubleshooting method: With SourceTree on Windows Servers, you may try to run it as an Administrator. That fixes my problem of "unable to update local ref" on Atlassian Source Tree 2.1.2.5 on a Windows Server 2012 R2 in domain.
If you can too replicate this situation, it proves that the problem is caused by permission issue. It's better to drill down and find the root cause - probably some particular files are owned by other users and such - otherwise there's an unwelcome side-effect: you'll have to run SourceTree as Administrator for the rest of eternity.
回答26:
Writing down a specific case that might cause this problem.
One day I pushed a branch named "feature/subfeature", while having "feature" branch on remote.
That operation worked fine without any error on my side, but when my co-workers fetched and/or pulled any branch, they all had the exact same error message unable to update local ref, cannot lock ref 'refs/remotes/origin/feature/subfeature.
This was solved by deleting feature branch on remote(git push --delete origin feature) and then running git remote prune origin on my co-workers' repo, which generated messages including * [pruned] origin/feature.
So, my guess is git fetch was trying to create subfeature ref in feature folder on git internally(.git/...), but creating folder failed because there was feature ref already.
回答27:
We got this issue when a developer on Mac created a branch with a greater than ">" symbol in the branch name.
That caused problems in TeamCity, and on local Windows based computers running SourceTree. BitBucket let it through without any problems.
To resolve the user removed the branch and recreated it. Which was nice and easy.
回答28:
Had the same msg but with a directory, got a failed msg on pull.
git --prone did not help me either. Turns out there was a file with the same name as a directory created remotely.
Had to go to .git\logs\refs\remotes\origin and erase the locale file - then pull again, all good.
来源：https://stackoverflow.com/questions/2998832/git-pull-fails-unable-to-resolve-reference-unable-to-update-local-ref