问题
I have a directory that contains my Python unit tests. Each unit test module is of the form test_*.py. I am attempting to make a file called all_test.py that will, you guessed it, run all files in the aforementioned test form and return the result. I have tried two methods so far; both have failed. I will show the two methods, and I hope someone out there knows how to actually do this correctly.
For my first valiant attempt, I thought \"If I just import all my testing modules in the file, and then call this unittest.main() doodad, it will work, right?\" Well, turns out I was wrong.
import glob
import unittest
testSuite = unittest.TestSuite()
test_file_strings = glob.glob(\'test_*.py\')
module_strings = [str[0:len(str)-3] for str in test_file_strings]
if __name__ == \"__main__\":
unittest.main()
This did not work, the result I got was:
$ python all_test.py
----------------------------------------------------------------------
Ran 0 tests in 0.000s
OK
For my second try, I though, ok, maybe I will try to do this whole testing thing in a more \"manual\" fashion. So I attempted to do that below:
import glob
import unittest
testSuite = unittest.TestSuite()
test_file_strings = glob.glob(\'test_*.py\')
module_strings = [str[0:len(str)-3] for str in test_file_strings]
[__import__(str) for str in module_strings]
suites = [unittest.TestLoader().loadTestsFromName(str) for str in module_strings]
[testSuite.addTest(suite) for suite in suites]
print testSuite
result = unittest.TestResult()
testSuite.run(result)
print result
#Ok, at this point I have a result
#How do I display it as the normal unit test command line output?
if __name__ == \"__main__\":
unittest.main()
This also did not work, but it seems so close!
$ python all_test.py
<unittest.TestSuite tests=[<unittest.TestSuite tests=[<unittest.TestSuite tests=[<test_main.TestMain testMethod=test_respondes_to_get>]>]>]>
<unittest.TestResult run=1 errors=0 failures=0>
----------------------------------------------------------------------
Ran 0 tests in 0.000s
OK
I seem to have a suite of some sort, and I can execute the result. I am a little concerned about the fact that it says I have only run=1, seems like that should be run=2, but it is progress. But how do I pass and display the result to main? Or how do I basically get it working so I can just run this file, and in doing so, run all the unit tests in this directory?
回答1:
You could use a test runner that would do this for you. nose is very good for example. When run, it will find tests in the current tree and run them.
Updated:
Here's some code from my pre-nose days. You probably don't want the explicit list of module names, but maybe the rest will be useful to you.
testmodules = [
'cogapp.test_makefiles',
'cogapp.test_whiteutils',
'cogapp.test_cogapp',
]
suite = unittest.TestSuite()
for t in testmodules:
try:
# If the module defines a suite() function, call it to get the suite.
mod = __import__(t, globals(), locals(), ['suite'])
suitefn = getattr(mod, 'suite')
suite.addTest(suitefn())
except (ImportError, AttributeError):
# else, just load all the test cases from the module.
suite.addTest(unittest.defaultTestLoader.loadTestsFromName(t))
unittest.TextTestRunner().run(suite)
回答2:
With Python 2.7 and higher you don't have to write new code or use third-party tools to do this; recursive test execution via the command line is built-in. Put an __init__.py in your test directory and:
python -m unittest discover <test_directory>
# or
python -m unittest discover -s <directory> -p '*_test.py'
You can read more in the python 2.7 or python 3.x unittest documentation.
回答3:
In python 3, if you're using unittest.TestCase:
- You must have an empty (or otherwise)
__init__.pyfile in yourtestdirectory (must be namedtest/) - Your test files inside
test/match the patterntest_*.py. They can be inside a subdirectory undertest/, and those subdirs can be named as anything.
Then, you can run all the tests with:
python -m unittest
Done! A solution less than 100 lines. Hopefully another python beginner saves time by finding this.
回答4:
This is now possible directly from unittest: unittest.TestLoader.discover.
import unittest
loader = unittest.TestLoader()
start_dir = 'path/to/your/test/files'
suite = loader.discover(start_dir)
runner = unittest.TextTestRunner()
runner.run(suite)
回答5:
Well by studying the code above a bit (specifically using TextTestRunner and defaultTestLoader), I was able to get pretty close. Eventually I fixed my code by also just passing all test suites to a single suites constructor, rather than adding them "manually", which fixed my other problems. So here is my solution.
import glob
import unittest
test_files = glob.glob('test_*.py')
module_strings = [test_file[0:len(test_file)-3] for test_file in test_files]
suites = [unittest.defaultTestLoader.loadTestsFromName(test_file) for test_file in module_strings]
test_suite = unittest.TestSuite(suites)
test_runner = unittest.TextTestRunner().run(test_suite)
Yeah, it is probably easier to just use nose than to do this, but that is besides the point.
回答6:
If you want to run all the tests from various test case classes and you're happy to specify them explicitly then you can do it like this:
from unittest import TestLoader, TextTestRunner, TestSuite
from uclid.test.test_symbols import TestSymbols
from uclid.test.test_patterns import TestPatterns
if __name__ == "__main__":
loader = TestLoader()
tests = [
loader.loadTestsFromTestCase(test)
for test in (TestSymbols, TestPatterns)
]
suite = TestSuite(tests)
runner = TextTestRunner(verbosity=2)
runner.run(suite)
where uclid is my project and TestSymbols and TestPatterns are subclasses of TestCase.
回答7:
I have used the discover method and an overloading of load_tests to achieve this result in a (minimal, I think) number lines of code:
def load_tests(loader, tests, pattern):
''' Discover and load all unit tests in all files named ``*_test.py`` in ``./src/``
'''
suite = TestSuite()
for all_test_suite in unittest.defaultTestLoader.discover('src', pattern='*_tests.py'):
for test_suite in all_test_suite:
suite.addTests(test_suite)
return suite
if __name__ == '__main__':
unittest.main()
Execution on fives something like
Ran 27 tests in 0.187s
OK
回答8:
I tried various approaches but all seem flawed or I have to makeup some code, that's annoying. But there's a convinient way under linux, that is simply to find every test through certain pattern and then invoke them one by one.
find . -name 'Test*py' -exec python '{}' \;
and most importantly, it definitely works.
回答9:
In case of a packaged library or application, you don't want to do it. setuptools will do it for you.
To use this command, your project’s tests must be wrapped in a
unittesttest suite by either a function, a TestCase class or method, or a module or package containingTestCaseclasses. If the named suite is a module, and the module has anadditional_tests()function, it is called and the result (which must be aunittest.TestSuite) is added to the tests to be run. If the named suite is a package, any submodules and subpackages are recursively added to the overall test suite.
Just tell it where your root test package is, like:
setup(
# ...
test_suite = 'somepkg.test'
)
And run python setup.py test.
File-based discovery may be problematic in Python 3, unless you avoid relative imports in your test suite, because discover uses file import. Even though it supports optional top_level_dir, but I had some infinite recursion errors. So a simple solution for a non-packaged code is to put the following in __init__.py of your test package (see load_tests Protocol).
import unittest
from . import foo, bar
def load_tests(loader, tests, pattern):
suite = unittest.TestSuite()
suite.addTests(loader.loadTestsFromModule(foo))
suite.addTests(loader.loadTestsFromModule(bar))
return suite
回答10:
I use PyDev/LiClipse and haven't really figured out how to run all tests at once from the GUI. (edit: you right click the root test folder and choose Run as -> Python unit-test
This is my current workaround:
import unittest
def load_tests(loader, tests, pattern):
return loader.discover('.')
if __name__ == '__main__':
unittest.main()
I put this code in a module called all in my test directory. If I run this module as a unittest from LiClipse then all tests are run. If I ask to only repeat specific or failed tests then only those tests are run. It doesn't interfere with my commandline test runner either (nosetests) -- it's ignored.
You may need to change the arguments to discover based on your project setup.
回答11:
Based on the answer of Stephen Cagle I added support for nested test modules.
import fnmatch
import os
import unittest
def all_test_modules(root_dir, pattern):
test_file_names = all_files_in(root_dir, pattern)
return [path_to_module(str) for str in test_file_names]
def all_files_in(root_dir, pattern):
matches = []
for root, dirnames, filenames in os.walk(root_dir):
for filename in fnmatch.filter(filenames, pattern):
matches.append(os.path.join(root, filename))
return matches
def path_to_module(py_file):
return strip_leading_dots( \
replace_slash_by_dot( \
strip_extension(py_file)))
def strip_extension(py_file):
return py_file[0:len(py_file) - len('.py')]
def replace_slash_by_dot(str):
return str.replace('\\', '.').replace('/', '.')
def strip_leading_dots(str):
while str.startswith('.'):
str = str[1:len(str)]
return str
module_names = all_test_modules('.', '*Tests.py')
suites = [unittest.defaultTestLoader.loadTestsFromName(mname) for mname
in module_names]
testSuite = unittest.TestSuite(suites)
runner = unittest.TextTestRunner(verbosity=1)
runner.run(testSuite)
The code searches all subdirectories of . for *Tests.py files which are then loaded. It expects each *Tests.py to contain a single class *Tests(unittest.TestCase) which is loaded in turn and executed one after another.
This works with arbitrary deep nesting of directories/modules, but each directory in between needs to contain an empty __init__.py file at least. This allows the test to load the nested modules by replacing slashes (or backslashes) by dots (see replace_slash_by_dot).
回答12:
Because Test discovery seems to be a complete subject, there is some dedicated framework to test discovery :
- nose
- Py.Test
More reading here : https://wiki.python.org/moin/PythonTestingToolsTaxonomy
回答13:
This BASH script will execute the python unittest test directory from ANYWHERE in the file system, no matter what working directory you are in: its working directory always be where that test directory is located.
ALL TESTS, independent $PWD
unittest Python module is sensitive to your current directory, unless you tell it where (using discover -s option).
This is useful when staying in the ./src or ./example working directory and you need a quick overall unit test:
#!/bin/bash
this_program="$0"
dirname="`dirname $this_program`"
readlink="`readlink -e $dirname`"
python -m unittest discover -s "$readlink"/test -v
SELECTED TESTS, independent $PWD
I name this utility file: runone.py and use it like this:
runone.py <test-python-filename-minus-dot-py-fileextension>
#!/bin/bash
this_program="$0"
dirname="`dirname $this_program`"
readlink="`readlink -e $dirname`"
(cd "$dirname"/test; python -m unittest $1)
No need for a test/__init__.py file to burden your package/memory-overhead during production.
回答14:
This is an old question, but what worked for me now (in 2019) is:
python -m unittest *_test.py
All my test files are in the same folder as the source files and they end with _test.
回答15:
Here is my approach by creating a wrapper to run tests from the command line:
#!/usr/bin/env python3
import os, sys, unittest, argparse, inspect, logging
if __name__ == '__main__':
# Parse arguments.
parser = argparse.ArgumentParser(add_help=False)
parser.add_argument("-?", "--help", action="help", help="show this help message and exit" )
parser.add_argument("-v", "--verbose", action="store_true", dest="verbose", help="increase output verbosity" )
parser.add_argument("-d", "--debug", action="store_true", dest="debug", help="show debug messages" )
parser.add_argument("-h", "--host", action="store", dest="host", help="Destination host" )
parser.add_argument("-b", "--browser", action="store", dest="browser", help="Browser driver.", choices=["Firefox", "Chrome", "IE", "Opera", "PhantomJS"] )
parser.add_argument("-r", "--reports-dir", action="store", dest="dir", help="Directory to save screenshots.", default="reports")
parser.add_argument('files', nargs='*')
args = parser.parse_args()
# Load files from the arguments.
for filename in args.files:
exec(open(filename).read())
# See: http://codereview.stackexchange.com/q/88655/15346
def make_suite(tc_class):
testloader = unittest.TestLoader()
testnames = testloader.getTestCaseNames(tc_class)
suite = unittest.TestSuite()
for name in testnames:
suite.addTest(tc_class(name, cargs=args))
return suite
# Add all tests.
alltests = unittest.TestSuite()
for name, obj in inspect.getmembers(sys.modules[__name__]):
if inspect.isclass(obj) and name.startswith("FooTest"):
alltests.addTest(make_suite(obj))
# Set-up logger
verbose = bool(os.environ.get('VERBOSE', args.verbose))
debug = bool(os.environ.get('DEBUG', args.debug))
if verbose or debug:
logging.basicConfig( stream=sys.stdout )
root = logging.getLogger()
root.setLevel(logging.INFO if verbose else logging.DEBUG)
ch = logging.StreamHandler(sys.stdout)
ch.setLevel(logging.INFO if verbose else logging.DEBUG)
ch.setFormatter(logging.Formatter('%(asctime)s %(levelname)s: %(name)s: %(message)s'))
root.addHandler(ch)
else:
logging.basicConfig(stream=sys.stderr)
# Run tests.
result = unittest.TextTestRunner(verbosity=2).run(alltests)
sys.exit(not result.wasSuccessful())
For sake of simplicity, please excuse my non-PEP8 coding standards.
Then you can create BaseTest class for common components for all your tests, so each of your test would simply look like:
from BaseTest import BaseTest
class FooTestPagesBasic(BaseTest):
def test_foo(self):
driver = self.driver
driver.get(self.base_url + "/")
To run, you simply specifying tests as part of the command line arguments, e.g.:
./run_tests.py -h http://example.com/ tests/**/*.py
来源：https://stackoverflow.com/questions/1732438/how-do-i-run-all-python-unit-tests-in-a-directory