How to build mex file directly in Visual Studio?

问题

I have a Visual Studio 2010 solution that contains a library of functions, and I would like to be able to use MATLAB as one of several possible front-ends to this library. Therefore, I would like Visual Studio to automatically generate a mex file when I build the solution, without having to export all my build options and paths to mexopts.bat and open MATLAB to build the file from there. I have seen several suggestions to achieve something similar, for example in these posts:

Matlab 7.1+ and Visual Studio 2005

Compiling a MEX file with Visual Studio

How to use CMake and Visual Studio 2010 (64 bit) to build a MATLAB R2011a (64 bit) mex file?

However, they either seem a bit outdated (making references to files that are no longer to be found) or make use of external tools (eg. CMake). Does anyone know how to set up a new project (within the existing solution) in Visual Studio (2010 and newer) that will build a mex file for contemporary MATLAB releases?

回答1:

After some experimenting with guidance from this page mentioned in the question, it seems like starting with an empty C++ project the following settings in the project's Property Pages are necessary and sufficient to build a working .mexw64 from Visual Studio 2010:

Configuration properties -> General:
    Set Target Extension to .mexw64
    Set Configuration Type to Dynamic Library (.dll)

Configureation poperties -> VC++ Directories:
    Add $(MATLAB_ROOT)\extern\include; to Include Directories

Configuration properties -> Linker -> General:
    Add $(MATLAB_ROOT)\extern\lib\win64\microsoft; to Additional Library Directories

Configuration properties -> Linker -> Input:
    Add libmx.lib;libmex.lib;libmat.lib; to Additional Dependencies

Configuration properties -> Linker -> Command Line:
    Add /export:mexFunction to Additional Options

$(MATLAB_ROOT) is the path to Matlab's root folder, eg. C:\Program Files\MATLAB\R2013a.

So far this has only been tried from a solution created from scratch and built for Matlab 2013a 64-bit. I assume that to build for 32-bit one only needs to change both occurrences of 64 to 32. I will update the post when I have confirmed that this works for an existing solution.

EDIT: As expected this works for projects added to existing solutions. Remember to set the new project to be dependent on the project that creates the library.

Edit 2: Following this question I can confirm that the above steps work in Visual Studio 2012, 2013, and 2017 too.

回答2:

Quickly Setting up Visual Studio Projects for MEX files with a Property Sheet

All of the settings can be applied via property sheets, a mechanism for rapidly applying Visual Studio project configurations.

Steps:

1. Download the property sheet (MATLAB.props) from this GitHib repo. It's short and sweet. I'd actual urge you to make your own to learn what's involved in the process. See the Property Sheet Details section below for a description.
2. Set the MATLAB root environment variables: MATLAB_ROOT for your 64-bit MATLAB installation, and MATLAB32_ROOT for any 32-bit MATLAB installations (e.g. C:\Program Files\MATLAB\R2014b\). This folder has the subdirectories bin, extern, sys, etc. Restart VS if it's opened.
3. Create an empty DLL project in Visual Studio, optionally creating a x64 solution platform. Do this by choosing "Win32 Project" and selecting DLL as follows:

4. In "Property Manager" (select from the View menu), for each project's build configuration, right click and choose "Add Existing Property Sheet...", and select the appropriate property sheet (32 or 64 bit). (See screenshot below)

That's it!

Just remember that when going between MATLAB to use your MEX file and Visual Studio to build a new version, it will be necessary to run a clear mex or clear specificMEXFileName to be able to overwrite it. I build almost all my MEX files this way.

UPDATE (05/22/15): The file MATLAB.props now supports the Parallel Computing Toolbox for using mxGPUArray objects. If the toolbox path and library (gpu.lib) exist on your machine, they can be used. Just include the CUDA SDK "Build Customization" (that should be installed if you've installed the CUDA SDK and installed the Visual Studio integrations) to include cuda_runtime.h, etc. Finally, link with cudart_static.lib (but keep Inherit... checked or you will get other linker errors).

---

Property Sheet Details

There are only a few important settings in the property sheet:

1. Adding $(MATLAB_ROOT)\extern\include to the AdditionalIncludeDirectories paths (with inherited paths from parent configurations) -- the location of mex.h.
2. Adding $(MATLAB_ROOT)\extern\lib\win64\microsoft to the AdditionalLibraryDirectories paths -- the location of libmex.lib, etc.
3. Listing the libraries: libut.lib;libmx.lib;libmex.lib;libmat.lib.
4. Exporting mexFunction (it's a shared library): /EXPORT:mexFunction.
5. Setting the output file extention (e.g. .mexw64 for x64).

Not necessary, but it also specifies an output manifest that is NOT embedded in the library, sets MATLAB_MEX_FILE, and turns on generation of data required for profiling.

For completeness, note that there is a more formal "build configuration" system for project configuration, which includes a property sheet, but a loose property sheet is sufficient for setting up a simple MEX project.

---

A Note About -largeArrayDims

The -largeArrayDims option is a switch to the mex command in MATLAB that simply indicates not to define MX_COMPAT_32. So, in Visual Studio, you don't have to do anything since this is not defined by default. If you want the opposite behavior (-compatibleArrayDims), then define MX_COMPAT_32 in the Preprocessor section.

---

What's libut.lib for?

I include libut.lib, which provides a few nice functions for detecting a break (CTRL-C) from within a MEX file. The relevant declarations (although this is getting off topic):

// prototype the break handling functions in libut (C library)
extern "C" bool utIsInterruptPending();
extern "C" void utSetInterruptPending(bool);

回答3:

For building/linking/compiling, automate visual studio with an extension or macro to

1. start a thin Matlab client (using -nojvm -noawt -nodesktop -nosplash commandline options, this starts in less than a second on my machine)
2. generate the binary by calling mex (including the other dependencies etc).
3. if debugging is activated, attached the visual studio debugger to your newly started thin matlab client(any break points you click in VS will be active).

I have automated this for visual studio 2010. This way, you work with your mex-wrapper entirely from the visual studio IDE, have 4 extra pushbuttons for debugging etc. Compile errors are echoed from a matlab terminal window instead of within Visual Studio. Find the Macros uploaded here:

http://www.mathworks.se/matlabcentral/fileexchange/39549-visual-studio-toolbar-for-mex-interface-with-video-tutorial

来源：https://stackoverflow.com/questions/16716821/how-to-build-mex-file-directly-in-visual-studio