Checkpoint VPN issue: Connectivity with VPN service is lost [closed]

别说谁变了你拦得住时间么 提交于 2021-01-26 19:39:55

问题


I installed checkpoint E75.30 Client for windows 8 SecuRemote. When I try to do anything with the SecuRemote (see client; add client; see options) all I get is "Connectivity with VPN service is lost" I looked at the services and Check Point Endpoint Security VPN service did not start automatically. When I try to start it manually I get Error 1075: Dependency service does not exist or has been marked for deletion Dependency service is DHCP client which is running fine... Any ideas?


回答1:


I managed to fix this issue on Windows 7 by going to

  1. Control Panel
  2. Programs and Features
  3. Check Point Endpoint Security VPN
  4. right click
  5. repair



回答2:


It's happening a lot in windows 10 updates. To solve, just found the Check point services, there are two, and start then. In msconfig, check the services to start with windows. I don´t know why, windows 10 updates disable this services.




回答3:


I managed to solve it by going into 'services' (start menu, type services) and noticed that checkpoint service was disabled. once you enable it, you should be all set.




回答4:


I found a solution to this problem.

I had McAfee installed on a new laptop (win 10 x64). Installed VPN, Error connecting. Uninstalled McAfee. Error. Repaired Checkpoint VPN. Error. Restart and repair. Error. Always got the error "Unable to load Virtual Network Adapter".

I am a contractor to a client who uses Checkpoint so cannot view checkpoint's KB articles. So cannot view any of their solutions. Client cannot give me login.

So. Finally figured this out:

  1. Click Start, click Run, type cmd.exe, and then press ENTER.
  2. Type set devmgr_show_nonpresent_devices=1, and then press ENTER.
  3. Type Start DEVMGMT.MSC, and then press ENTER.
  4. Click View, and then click Show Hidden Devices.
  5. Expand the Network Adapters tree.
  6. Right click on Check Point Virtual Network Adapter For Endpoint VPN Client select Disable and then again and Enable
  7. Attempt to connect now.

Thanks to This Link for steps 1-5.




回答5:


I had the same problem, I was able to resolve this by going to control panel, services, and then I started all of the Check Point services (there are 4 and 2 were down)




回答6:


I am not sure if you are still getting this error, or if you have resolved it, but I was having the same problem and found this question.

I was getting the same error message, but I was able to restart the service without any errors.

Here are the dependant services that I have running:

  • Check Point Virtual Network Adapter - Apollo
  • DHCP Client

DHCP Client is dependant on the following:

  • Ancillary Function Driver for Winstock
  • NetIO Legacy TDI Support Driver
  • Network Store Interface Service

Have you checked if those services are running? Try restart them if possible.

This page recommends deleting the services and restarting your machine. I would create a restore point before you try deleting any services.




回答7:


I solved this issue by Right click >>> repair on the file : CheckPointVPN.msi .




回答8:


I got same problem and resolved. * If you use LAN connection, try it by disconnecting the LAN cable and connecting to WiFi. * If not works, try it by connecting via a Dongle or Mobile Hotspot.

(LAN connection and WiFi of the company get it's proxy and proxy prevents the VPN)




回答9:


I had the same issue but fix this simply with rightclick->run as administrator




回答10:


Go to the BIOS settings and uncheck Auto Switch Network Adapters



来源:https://stackoverflow.com/questions/23624209/checkpoint-vpn-issue-connectivity-with-vpn-service-is-lost

易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!