Installing Jenkins on Ubuntu

这一生的挚爱 提交于 2020-02-29 13:39:18

On Debian-based distributions, such as Ubuntu, you can install Jenkins through apt-get.

Recent versions are available in an apt repository. Older but stable LTS versions are in this apt repository.

You need to have a JDK and JRE installed. openjdk-7-jre and openjdk-7-jdk are suggested. As of 2011-08 gcj is known to be problematic - see https://issues.jenkins-ci.org/browse/JENKINS-743.

Please make sure to back up any current Hudson or Jenkins files you may have.

Installation

wget -q -O - https://jenkins-ci.org/debian/jenkins-ci.org.key | sudo apt-key add -
sudo sh -c 'echo deb http://pkg.jenkins-ci.org/debian binary/ 
    > /etc/apt/sources.list.d/jenkins.list'
sudo apt-get update
sudo apt-get install jenkins

Upgrade

Once installed like this, you can update to the later version of Jenkins (when it comes out) by running the following commands:

sudo apt-get update
sudo apt-get install jenkins

(aptitude or apt-get doesn't make any difference.)

What does this package do?

  • Jenkins will be launched as a daemon up on start. See /etc/init.d/jenkins for more details.

  • The 'jenkins' user is created to run this service.

  • Log file will be placed in /var/log/jenkins/jenkins.log. Check this file if you are troubleshooting Jenkins.

  • /etc/default/jenkins will capture configuration parameters for the launch like e.g JENKINS_HOME

  • By default, Jenkins listen on port 8080. Access this port with your browser to start configuration.

If your /etc/init.d/jenkins file fails to start jenkins, edit the /etc/default/jenkins to replace the line
HTTP_PORT=8080

by

HTTP_PORT=8081

Here, 8081 was chosen but you can put another port available.

Deploying on Ubuntu in a cloud (EC2, HP Cloud, OpenStack)

The Ubuntu Jenkins maintainer also maintains the Juju charm deployment/management script for deployment in clouds. It's designed to make it easy to deploy a master with multiple slaves:

juju deploy jenkins
juju deploy -n 5 jenkins-slave
juju add-relation jenkins jenkins-slave

The default password for the 'admin' account will be auto-generated. You can set it using:

juju set jenkins password=mypassword

Always change it this way - this account is used by the charm to manage slave configuration. Then feel free to expose your jenkins master:

juju expose jenkins

Using Linux iptables for port 80 -> 8080

  • This enables port forwarding of traffic between ports 80 and 8080. You can keep Jenkins on the default port 8080 and access it with a normal url without installing anything extra.

  • sudo nano /etc/rc.local

  • Then add the following just before the exit 0

#Requests from outside
iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-ports 8080
#Requests from localhost
iptables -t nat -I OUTPUT -p tcp -d 127.0.0.1 --dport 80 -j REDIRECT --to-ports 8080

Now reboot or run sudo /etc/rc.local to enable port forwarding. Additional info: https://gist.github.com/m5m1th/6870a54717c0387468c3

Setting up an Apache Proxy for port 80 -> 8080

  • This configuration will setup Apache2 to proxy port 80 to 8080 so that you can keep Jenkins on 8080.

  • sudo aptitude install apache2

  • sudo a2enmod proxy

  • sudo a2enmod proxy_http

do not do this next command if you already have virtual hosting setup that depends on the default site. See my comment below - danapsimer
  • sudo a2dissite default

If you get ERROR: Site default does not exist! then try this instead:
  • sudo a2dissite 000-default

And if all else fails just have a look if there is a default site set up at all:

  • ls  /etc/apache2/sites-enabled/

  • Create a file called jenkins.conf in /etc/apache2/sites-available

<VirtualHost *:80>
	ServerAdmin webmaster@localhost
	ServerName ci.company.com
	ServerAlias ci
	ProxyRequests Off	<Proxy *>
		Order deny,allow
		Allow from all	</Proxy>
	ProxyPreserveHost on
	ProxyPass / http://localhost:8080/ nocanon
	AllowEncodedSlashes NoDecode</VirtualHost>
  • sudo a2ensite jenkins

  • sudo apache2ctl restart

Setting up an Nginx Proxy for port 80 -> 8080

This configuration will setup Nginx to proxy port 80 to 8080 so that you can keep Jenkins on 8080. Instructions originally found in a GitHub Gist from rdegges: https://gist.github.com/913102

  • Install Nginx.

    sudo aptitude -y install nginx
  • Remove default configuration.

    cd /etc/nginx/sites-available
    sudo rm default ../sites-enabled/default
  • Create new configuration for Jenkins. This example uses cat, but you can use your favorite text editor. Make sure to replace 'ci.yourcompany.com' with your domain name.
    Note: Sometimes your permissions (umask, etc) might be setup such that this won't work. Create the file somewhere else then copy it into place if you run into that problem.

    sudo cat > jenkins
    upstream app_server {
        server 127.0.0.1:8080 fail_timeout=0;
    }
    
    server {
        listen 80;
        listen [::]:80 default ipv6only=on;
        server_name ci.yourcompany.com;
    
        location / {
            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
            proxy_set_header Host $http_host;
            proxy_redirect off;        if (!-f $request_filename) {
                proxy_pass http://app_server;            break;
            }
        }
    }
    ^D # Hit CTRL + D to finish writing the file
  • Link your configuration from sites-available to sites-enabled:

    sudo ln -s /etc/nginx/sites-available/jenkins /etc/nginx/sites-enabled/
  • Restart Nginx

    sudo service nginx restart

Where to go from here?


易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!