Decoding tcp packets using python

问题

I am trying to decode data received over a tcp connection. The packets are small, no more than 100 bytes. However when there is a lot of them I receive some of the the packets joined together. Is there a way to prevent this. I am using python

I have tried to separate the packets, my source is below. The packets start with STX byte and end with ETX bytes, the byte following the STX is the packet length, (packet lengths less than 5 are invalid) the checksum is the last bytes before the ETX

def decode(data):
  while True:
    start = data.find(STX)
    if start == -1: #no stx in message
        pkt = ''
        data = ''
        break
    #stx found , next byte is the length
    pktlen = ord(data[1])
    #check message ends in ETX (pktken -1) or checksum invalid
    if pktlen < 5 or data[pktlen-1] != ETX or checksum_valid(data[start:pktlen]) == False:
        print "Invalid Pkt"
        data = data[start+1:]
        continue
    else:
        pkt = data[start:pktlen]
        data = data[pktlen:]
        break

return data , pkt

I use it like this

#process reports
try:
    data = sock.recv(256) 
except: continue 
else:
    while data:
        data, pkt = decode(data) 
        if pkt:
           process(pkt)

Also if there are multiple packets in the data stream, is it best to return the packets as a collection of lists or just return the first packet

I am not that familiar with python, only C, is this method OK. Any advice would be most appreciated. Thanks in advance

Thanks

回答1:

I would create a class that is responsible for decoding the packets from a stream, like this:

class PacketDecoder(object):

    STX = ...
    ETX = ...

    def __init__(self):
        self._stream = ''

    def feed(self, buffer):
        self._stream += buffer

    def decode(self):
        '''
        Yields packets from the current stream.
        '''
        while len(self._stream) > 2:
            end = self._stream.find(self.ETX)
            if end == -1:
                break

            packet_len = ord(self._stream[1])
            packet = self._stream[:end]
            if packet_len >= 5 and check_sum_valid(packet):
                yield packet
            self._stream = self._stream[end+1:]

And then use like this:

decoder = PacketDecoder()
while True:
    data = sock.recv(256) 
    if not data:
        # handle lost connection... 
    decoder.feed(data)
    for packet in decoder.decode():
        process(packet)

回答2:

TCP provides a data stream, not individual packets, at the interface level. If you want discrete packets, you can use UDP (and handle lost or out of order packets on your own), or put some data separator inline. It sounds like you are doing that already, with STX/ETX as your separators. However, as you note, you get multiple messages in one data chunk from your TCP stack.

Note that unless you are doing some other processing, data in the code you show does not necessarily contain an integral number of messages. That is, it is likely that the last STX will not have a matching ETX. The ETX will be in the next data chunk without an STX.

You should probably read individual messages from the TCP data stream and return them as they occur.

回答3:

Try scapy, a powerful interactive packet manipulation program.

回答4:

Where does the data come from ? Instead of trying to decode it by hand, why not use the excellent Impacket package:

http://oss.coresecurity.com/projects/impacket.html

回答5:

Nice and simple... :) The trick is in the file object.

f=sock.makefile()
while True:
  STX = f.read(1)
  pktlen = f.read(1)
  wholePacket = STX + pktlen + f.read(ord(pktlen)-2)
  doSomethingWithPacket(wholePacket)

And that's it! (There is also no need to check checksums when using TCP.)

And here is a more "robust"(?) version (it uses STX and checksum):

f=sock.makefile()
while True:
  while f.read(1)!=STX:
    continue
  pktlen = f.read(1)
  wholePacket = STX + pktlen + f.read(ord(pktlen)-2)
  if checksum_valid(wholePacket):
    doSomethingWithPacket(wholePacket)

来源：https://stackoverflow.com/questions/2184181/decoding-tcp-packets-using-python

标签

python

string

tcp

decoding

packets