问题
Im looking for something better than sudo restart projectname every time I issue a git pull origin master, which pulls down my latest changes to a Django project. This restart command, I believe, is related to Upstart, which I use to start/top my Gunicorn server process.
This restart causes a brief outage. Users hitting the web server (nginx) will get a 500, because Gunicorn is still restarting. In fact, it seems to restart instantly, but it takes a few seconds for pages to load.
Any ideas on how to make this seamless? Ideally, I'd like to issue my git pull and Gunicorn reloads automatically.
回答1:
For a graceful reload, you should instead use Upstart's reload command, e.g.:
sudo reload jobname
According to the initctl (Upstart) manpage, reload will send a HUP signal to the process:
reload JOB [KEY=VALUE]...
Sends the SIGHUP signal to running process of the named JOB instance.
...which for Gunicorn will trigger a graceful restart (see FAQ).
回答2:
You can tell Gunicorn to reload gracefully using the HUP signal like so:
kill -HUP <pid>
(see the FAQ for details)
I use Supervisor to control my Gunicorn server, which allows me to use this (slightly hacky) way of reloading Gunicorn after a deploy:
supervisorctl status gunicorn | sed "s/.*[pid ]\([0-9]\+\)\,.*/\1/" | xargs kill -HUP
You could obviously achieve something similar with pidof, or ps.
This is actually run from a Fabric script, so I don't even have to logon to the server at all.
回答3:
For those not using supervisord: what Rob said, it works with ps as well,
ps aux |grep gunicorn |grep projectname | awk '{ print $2 }' |xargs kill -HUP
回答4:
Systemd, gunicorn & Ubuntu
Here is the one-liner, if you are running your gunicorn service with systemd.
systemctl status gunicorn | sed -n 's/.*Main PID: \(.*\)$/\1/g p' | cut -f1 -d' ' | xargs kill -HUP
Details step by step
Since the gunicorn docs tell that the correct way to gracefully reload the workers is by using kill -HUP <Main PID>, where <Main PID> is the process id of the master process, we extract the master PID using systemctl, and run kill -HUP <Main PID>.
1) Get info about the process from systemd using the name of the service
systemctl status gunicorn
where gunicorn is the name of the service, located at /etc/systemd/system/.
Example output:
ubuntu@ip-10-4-12-247:~$ systemctl status gunicorn
● gunicorn.service - Gunicorn server for yourproject.com
Loaded: loaded (/etc/systemd/system/gunicorn.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2017-11-04 19:16:24 UTC; 1h 15min ago
Main PID: 10673 (gunicorn)
CGroup: /system.slice/gunicorn.service
├─10673 /home/ubuntu/site/venv/bin/python3 /home/ubuntu/site/venv/bin/gunicorn --workers 3 --bind unix:/tmp/yourproject.socket config.wsgi:application
├─11069 /home/ubuntu/site/venv/bin/python3 /home/ubuntu/site/venv/bin/gunicorn --workers 3 --bind unix:/tmp/yourproject.socket config.wsgi:application
├─11070 /home/ubuntu/site/venv/bin/python3 /home/ubuntu/site/venv/bin/gunicorn --workers 3 --bind unix:/tmp/yourproject.socket config.wsgi:application
└─11071 /home/ubuntu/site/venv/bin/python3 /home/ubuntu/site/venv/bin/gunicorn --workers 3 --bind unix:/tmp/yourproject.socket config.wsgi:application
Nov 04 20:27:04 ip-10-4-12-247 gunicorn[10673]: [2017-11-04 20:27:04 +0000] [11047] [INFO] Booting worker with pid: 11047
Nov 04 20:27:04 ip-10-4-12-247 gunicorn[10673]: [2017-11-04 20:27:04 +0000] [11048] [INFO] Booting worker with pid: 11048
Nov 04 20:32:16 ip-10-4-12-247 gunicorn[10673]: [2017-11-04 20:32:16 +0000] [10673] [INFO] Handling signal: hup
Nov 04 20:32:16 ip-10-4-12-247 gunicorn[10673]: [2017-11-04 20:32:16 +0000] [10673] [INFO] Hang up: Master
Nov 04 20:32:16 ip-10-4-12-247 gunicorn[10673]: [2017-11-04 20:32:16 +0000] [11046] [INFO] Worker exiting (pid: 11046)
Nov 04 20:32:16 ip-10-4-12-247 gunicorn[10673]: [2017-11-04 20:32:16 +0000] [11047] [INFO] Worker exiting (pid: 11047)
Nov 04 20:32:16 ip-10-4-12-247 gunicorn[10673]: [2017-11-04 20:32:16 +0000] [11048] [INFO] Worker exiting (pid: 11048)
Nov 04 20:32:16 ip-10-4-12-247 gunicorn[10673]: [2017-11-04 20:32:16 +0000] [11069] [INFO] Booting worker with pid: 11069
Nov 04 20:32:16 ip-10-4-12-247 gunicorn[10673]: [2017-11-04 20:32:16 +0000] [11070] [INFO] Booting worker with pid: 11070
Nov 04 20:32:16 ip-10-4-12-247 gunicorn[10673]: [2017-11-04 20:32:16 +0000] [11071] [INFO] Booting worker with pid: 11071
2) Get the process ID (PID) of the main gunicorn process
The sed command works like follows: sed 's/<search this>/<replace with this>/g'
smeans for the substitute command, andgmeans that search the whole input globally.- The
-nflag tells sed not to print every line (or actually, not to print anything.) - The
pat the end tells sed to print the matched line. - We search for
.*Main PID: \(.*\)$, which is a regular expression pattern, which has following parts:.*matches any character (.) zero or more times (*). Then we search forMain PID:followed by any characters, repeated zero or more times (.*). To capture all characters after theMain PID:-text, we enclose the.*into parenthesis, which are escaped with backslashes:\(.*\).$indicates line end. - The "replace with this" part of the sed command is just
\1, which means the first captured set of characters.
Example output:
ubuntu@ip-10-4-12-247:~$ systemctl status gunicorn | sed -n 's/.*Main PID: \(.*\)$/\1/g p'
10673 (gunicorn)
3) Get rid of the extra characters
Pipe the output to cut. The cut -f1 -d' ' means, that
- The string is space delimited: Here
-ddetermines the delimiter, which is the characted just after the-d. Since the delimiter is space, we enclose that in quotes. -fmeans just that cutting is made using the delimiter (and not by bytes), and-f1means that we want to take out the first element of the list.
Example output:
ubuntu@ip-10-4-12-247:~$ systemctl status gunicorn | sed -n 's/.*Main PID: \(.*\)$/\1/g p' | cut -f1 -d' '
10673
4) Use the Main PID
Piping to xargs means just running the command with arguments from the pipe on the left hand side. Since we are piping just the Main PID to xargs,
systemctl status gunicorn-django | sed -n 's/.*Main PID: \(.*\)$/\1/g p' | cut -f1 -d' ' | xargs kill -HUP
is basically just the same thing as
echo <Main PID > | xargs kill -HUP
which translates into
kill -HUP <Main PID >
Edit
A little more robust solution would be to use cut -f1 -d$'\n' or grep -m1 "" in front of cut -f1 -d' ', to pick just the first line of the match. I can't figure out any circumstances, where there would be two matches for the Main PID:, though.
回答5:
We run Gunicorn under Supervisor, but this is the simplest, cleanest way we've found to gracefully reload Gunicorn when it gets confused:
sudo pkill -HUP -f gunicorn.*master
回答6:
Maybe not a direct answer to the question, but for those who are just looking for a way to restart gunicorn web server, you can use killall gunicorn and then execute a command to start gunicorn again. For example:
killall gunicorn
gunicorn --bind 0.0.0.0:80 --reload app:app
Note: killall gunicorn will terminate all gunicorn processes immediately so make sure you understand what you are doing.
回答7:
Restart gunicorn service using cmdsystemctl restart gunicorn
else restart gunicorn service and create the sock file again.
来源：https://stackoverflow.com/questions/9881819/a-better-way-to-restart-reload-gunicorn-via-upstart-after-git-pulling-my-dja