问题
I have studied many useful threads and some tutorials, but I'm still having some issues with something that should be very simple. For reference here are some threads that I've perused:
How to implement a timeout in read function call?
how to open, read, and write from serial port in C
At any rate, I have a bit of a problem. My code works fine if I receive data. If I don't, the read() function stalls and the only way to get out of my program is to use kill -9 (NOTE: I use signal handling to signal to the thread reading the serial data to terminate. This is not the culprit, the read() call still stalls even if I have removed my signal handling). What I'm trying to do is to have a read that blocks and reads a chunk at a time (therefore saving CPU usage), however if the read receives no data, I wan't it to timeout.
Here are the settings that I'm applying to the port:
struct termios serial_struct;
serial_struct.c_cflag = B115200 | CS8 | CLOCAL | CREAD;
serial_struct.c_iflag = IGNPAR;
serial_struct.c_oflag = 0;
serial_struct.c_lflag = 0;
serial_struct.c_cc[VTIME] = 1; // timeout after .1s that isn't working
serial_struct.c_cc[VMIN] = 64; // want to read a chunk of 64 bytes at a given time
I then set these settings with tcsetattr() and confirm that the port received the settings via tcgetattr(). I'm thinking that my settings may be conflicting, because my reads appear to be blocking and wait until 64 bytes are received, but do not do anything with regards to the timeout. I understand that I can use select() to deal with a timeout, but I'm hoping to avoid the multiple system calls.
As always, thanks in advance for the help.
回答1:
From man 3 termios:
MIN > 0; TIME > 0: TIME specifies the limit for a timer in tenths of a second. Once an initial byte of input becomes available, the timer is restarted after each further byte is received. read(2) returns either when the lesser of the number of bytes requested or MIN byte have been read, or when the inter-byte timeout expires. Because the timer is only started after the initial byte becomes available, at least one byte will be read.
Note that the timer does not start until at least one byte of data is received. After receiving that first data byte, the read will timeout if there is ever a gap of TIME tenths of a second between receiving consecutive data bytes.
来源：https://stackoverflow.com/questions/18070731/linux-serial-port-blocking-read-with-timeout