问题
In Rails 3, is there a built in method for seeing if a string is a valid IP address?
If not, what is the easiest way to validate?
回答1:
Just wanted to add that instead of writing your own pattern you can use the build in one Resolv::IPv4::Regex
require 'resolv'
validates :gateway, :presence => true, :uniqueness => true,
:format => { :with => Resolv::IPv4::Regex }
回答2:
The Rails way to validate with ActiveRecord in Rails 3 is:
@ip_regex = /^([1-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\.([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3}$/
validates :gateway,
:presence => true,
:uniqueness => true,
:format => { :with => @ip_regex }
Good resource here: Wayback Archive - Email validation in Ruby On Rails 3 or Active model without regexp
回答3:
You can also just call standard's library IPAddr.new
that will parse subnets, IPV6 and other cool things: (IPAddr) and return nil
if the format was wrong.
Just do:
valid = !(IPAddr.new('192.168.2.0/24') rescue nil).nil?
#=> true
valid = !(IPAddr.new('192.168.2.256') rescue nil).nil?
#=> false
回答4:
You can use Resolv::IPv4::Regex
as Jack mentioned below if you don't need to accept subnets.
If you need to accept it, activemodel-ipaddr_validator gem may help you. (disclaimer: I'm the author of the gem)
validates :your_attr, ipaddr: true
回答5:
i dont know about RoR a lot, but if you dont find any built in method for validation of IP Address.
Try on this regular expression :
"^([1-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\.([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3}$"
to validate the IP Address.
I recently used it in one module so had it on desktop.
回答6:
You should use a Regular Expression
Here is one that does what you want:
/^([1-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\.
([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3}$/.match("#{@systemIP}")
回答7:
You can also use Regexy::Web::IPv4 which can match ip addresses with port numbers too.
来源:https://stackoverflow.com/questions/3756184/rails-3-validate-ip-string