Visual studio - getting error “Metadata file 'XYZ' could not be found” after edit continue

问题

I have stumbled into an issue that is really annoying.
When I debug my software, everything runs OK, but if I hit a breakpoint and edit the code, when I try to continue running I get an error:
Metadata file 'XYZ' could not be found

After looking around for a while, I found some a similar issues, but they were all regarding a build failure, which is not my case (this happens only after edit-continue).

What I have tried so far:

• My code is compiling and running.
• I cleaned the solution and restarted VS.
• I made sure that the missing file's project is being build for the configuration I am running (in configuration manager).
• I manually built the missing file's project.

Some extra info:

• It does not matter what I change, still get the same error (the change is not related to the missing file).
• This happens also when I pause and continue (not only breakpoints)
• I am running the project using a custom configuration (configuration manager...). When I run it using the default Debug configuration the error does not occur.

Any ideas?

回答1:

Eventually what solved the issue was:

1. Clean every project individually (Right click> Clean).
2. Rebuild every project individually (Right click> Rebuild).
3. Rebuild the startup project.

I guess for some reason, just cleaning the solution had a different effect than specifically cleaning every project individually.

Edit:
As per @maplemale comment, It seems that sometimes removing and re-adding each reference is also required.

Update 2019:
This question got a lot of traffic in the past, but it seems that since VS 2017 was released, it got much less attention.
So another suggestion would be - Update to a newer version of VS (>= 2017) and among other new features this issue will also be solved

回答2:

As far as I can tell, this happens when the project dependencies gets messed up for whatever reason (whilst all the inter-project references are still intact). For many cases, it is NOT a code issue. And for those who have more than a few projects, going through them one at a time is NOT acceptable.

It's easy to reset project dependencies -

1. Select all projects and right click unload
2. Select all projects and right click reload
3. Rebuild solution

For those who have an issue in their code or some other issue that's causing this problem you'll obviously have to solve that issue first.

回答3:

One possible reason could be you have upgraded the some of your projects (in the solution) to higher version e.g. from .NET 4.0 to 4.5 This happened in my case when I opened the solution in VS 2013 (originally created using VS 2010 and .NET 4.0). When I opened in VS 2013 my C++ project got updated to .NET 4.5 and I started to see the problem.

回答4:

Generally this kind of error comes with human mistakes like if we change the namespace in some improper way, or changing folder names from explorer for current project etc, where compiler is unable to detect sometimes.

I came across the same error, to resolve which I tried few steps. Please follow all the steps :

1. Clean whole Solution
2. Right Click on every Project in your solution , Go to Properties and make your Default namespace as well as Default assembly name same as in your code (i.e namespace before class name)
3. Check Folder names for each project by going through the explorer(Where your project solution is). If not matching with your project names, make it similar (Like step 2) to them.
4. Remove all your references from each project relevant to another of same solution, and add it again.
5. In Your Project Solution folder, you will find Visual c# Project file. Right click and open with Notepad. In your initial lines you would find for lines for every project like below:

Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "**Client**", "**Client** \ **Client**.csproj", "{4503E259-0E3B-414A-9074-F251684322A5}" EndProject

Check again Foldernames (I have highlighted in BOLD) and make it similar to what you did in step 2.

6. Clean the whole solution again

7. Build The Solution (If doesn't work try building individual after cleaning again)

回答5:

Make sure all your dependent projects are using the same .Net Framework version. I had the same issue caused by a dependent project using 4.5.1, while all others were using 4.5. Changing the project from 4.5.1 to 4.5 and rebuilding my solution fixed this issue for me.

回答6:

XYZ couldn't be found because is not built yet....

Right click on the solution and check Project Dependencies, the Project Build Order should also change according to the dependencies that have been set.

回答7:

The only thing that worked for me was to delete the Solution User Options (.suo) file. Note that, this is a hidden file.

To locate this file, close your Virsual studio and search for .suo from the file explorer within your project.

PS: a new .suo file will be created again when you rebuild your project and hopefully this newly created one wont give you issues.

I hope that helps someone get rid of this anoying error :).

回答8:

I had this problem for days! I tried all the stuff above, but the problem kept coming back. When this message is shown it can have the meaning of "one or more projects in your solution did not compile cleanly" thus the metadata for the file was never written. But in my case, I didn't see any of the other compiler errors!!! I kept working at trying to compile each solution manually, and only after getting VS2012 to actually reveal some compiler errors I hadn't seen previously, this problem vanished.

I fooled around with build orders, no build orders, referencing debug dlls (which were manually compiled)... NOTHING seemed to work, until I found these errors which did not show up when compiling the entire solution!!!!

Sometimes, it seems, when compiling, that the compiler will exist on some errors... I've seen this in the past where after fixing issues, subsequent compiles show NEW errors. I don't know why it happens and it's somewhat rare for me to have these issues. However, when you do have them like this, it's a real pain in trying to find out what's going on. Good Luck!

回答9:

Well, my answer is not just the summary of all the solutions, but it offers more than that.

Section (1):

In general solutions:

I had 4 errors of this kind (‘metadata file could not be found’) along with 1 error saying 'Source File Could Not Be Opened (‘Unspecified error ‘)'.

I tried to get rid of ‘metadata file could not be found’ error. For that, I read many posts, blogs etc and found these solutions may be effective (summarizing them over here):

Restart VS and try building again.

Go to 'Solution Explorer'. Right click on Solution. Go to Properties. Go to 'Configuration Manager'. Check if the checkboxes under 'Build' are checked or not. If any or all of them are unchecked, then check them and try building again.

If the above solution(s) do not work, then follow sequence mentioned in step 2 above, and even if all the checkboxes are checked, uncheck them, check again and try to build again.

Build Order and Project Dependencies:

Go to 'Solution Explorer'. Right click on Solution. Go to 'Project Dependencies...'. You will see 2 tabs: 'Dependencies' and 'Build Order'. This build order is the one in which solution builds. Check the project dependencies and the build order to verify if some project (say 'project1') which is dependent on other (say 'project2') is trying to build before that one (project2). This might be the cause for the error.

Check the path of the missing .dll:

Check the path of the missing .dll. If the path contains space or any other invalid path character, remove it and try building again.

If this is the cause, then adjust the build order.

回答10:

Are you using a database code generation tool like SQLMETAL in your project?

If so, you may be facing a pluralized to unpluralized transition issue.

In my case, I have noted that some old pluralized (*) table names (upon which SQLMETAL adds, by default, an "s" letter at the end) table references to classes generated by SQLMETAL.

Since, I have recently disabled Pluralization of names, after regerating some database related classes, some of them lost their "s" prefix. Therefore, all references to affected table classes became invalid. For this reason, I have several compilation errors like the following:

'xxxx' does not contain a definition for 'TableNames' and no extension method 'TableNames' accepting a first argument of type 'yyyy' could be found (are you missing a using directive or an assembly reference?)

As you know, I takes only on error to prevent an assembly from compiling. And that is the missing assemply is linkable to dependent assemblies, causing the original "Metadata file 'XYZ' could not be found"

After fixing affected class tables references manually to their current names (unpluralized), I was finnaly able to get my project back to life!

(*) If option Visual Studio > Tools menu > Options > Database Tools > O/R Designer > Pluralization of names is enabled, some SQLMETALl code generator will add an "s" letter at the end of some generated table classes, although table has no "s" suffix on target database. For further information, please refer to http://msdn.microsoft.com/en-us/library/bb386987(v=vs.110).aspx

Hope it helps!

回答11:

I had this error come up. I followed all of the solutions here but nothing worked. I was using Visual Studio 2013 Professional. I couldn't get the individual project rebuilds to work and I finally figured out there was a circular dependency in my references. Visual Studio does a pretty good job normally of warning you if you are adding a reference to something that references back, but for some reason it didn't in this instance. I added a reference to a project that referenced the project I was working on - and it accepted it. VS bug perhaps?

回答12:

My 5 cents.

This problem started after a solution wide clean.

I managed to get the problem to go away by setting the Active Solution configuration in: Build -> Configuration manager to release. Then build and set it back to debug again. The build succeeded after that.

回答13:

Close VS, locate and remove the 'packages' folder from outside of visual studio. Restart VS and build -> all dependencies are reinstalled

回答14:

Visual Studio 2019 Community 16.3.10
I had similar issue with Release build. Debug build was compiling without any issues. Turns out that the problem was caused by OneDrive. Most likely one could experience similar issues with any backed-up drive or cloud service.

I cleaned everything as per Avi Turner's great answer.

In addition, I manually deleted the \obj\Release -folder from my OneDrive folder and also logged to OneDrive with a browser and deleted the folder there also to prevent OneDrive from loading the cloud version back when compiling.
After that rebuilt and everything worked as should.

回答15:

For a new build, it could be that some dependencies aren't installed. For me it was Crystal Reports.

回答16:

this happens because of the difference of names in the folder name and namespace name. If u create a namespace in a certain name , and later you rename it the namespace will have the old name itself. And the compilation will take the old path to find the .dll and .exe file . To avoid this open the .csproj file of each namespace with a text file , and find the old path in the file.

remove this, clean and rebuild the solution. This worked for me. I spent an entire day working on this problem.

回答17:

It happens when one project dll is failing and that is referenced by number of projects. So first fix it and then Build individuals.

回答18:

I ve had this problem and it has started after importing our solution to TFS as a new project.I came across this topic and found a quick solution with some inspiration from your answers.

All i needed to do is to rebuild the project thats supposedly lost its metadata file and voila , problem solved.

回答19:

There's also one another silly reason which you should check with patience... as it occurred to me after wasting 4hours searching for answers:

The story to me was that I accidentally changed a small line of code among thousands of c# class files and then trying to rebuild the solution. As you could imagine, I ended up with 40+ meta data file missing errors and with 1 compilation error among them -- which I didn't check carefully, purely thinking all errors were the same!

after 4 hours searching and then accidentally double checking my error list, I found that silly code error, fixed it, compiled, and then error disappeared.

Not a good answer to your problem, but do hope my case wasn't same to yours.

回答20:

I had the same problem. In my case I had by mistake I had set all the projects apart from the project with the main method as console application.

To resolve I went to every project other than the one with main function and right click> properites > output type > class library

回答21:

it was happened to me because I've a strange clash in the namespaces: I had AssemblyA with namespace AssemblyA.ParentNamespace witch defines ClassA and in the same assembly another namespace with name AssemblyA.ParentNamespace.ChildNamespace witch defines a different ClassA (but with the same name)

I had then in AssemblyA.ParentNamespace IInterfaceB witch had a method that in the beginning returns IEnumerable and a ClassB witch implements IInterfaceB

I had later modified the method in ClassB to return IEnumerable but I've forgot to update the IInterfaceB definition, so the method there was still returning IEnumerable the fun fact was that the solution still complile if I did a rebuild all, but the tests witch refers AssemblyA didsn't work and returns the "Metadata file could not be found"error.

updating InterfaceB to correctly return IEnumerable as its implementor ClassB did solved the problem, unfortunately the error message was vague and also the fact that the compilation worked makes me suppose that maybe there is something to fix in the compiler

回答22:

I had this and managed to fix it using this SO answer: Metadata file '.dll' could not be found

I had to uncheck all of the boxes, click Apply, reenable all of the checkboxes and then click apply again, but it fixed the problem.

回答23:

I just ran into this issue and after an hour of screwing around realized I had added an aspx file to my product that had the same name as one of my Linq-To-Sql classes.
Class and Page where "Queue".
Changed the page to QueueMgr.aspx and everything built just fine.

回答24:

A coworker was running into this problem and the cause was eluding us. Eventually we realized that the project directory (and therefore the path to the NuGet packages) contained %20 (thanks, some Git gui tool which shall not be named) and the error messages showed that the compiler was looking for an very similar-looking path but one which had to %20, rather a space. Apparently something in the build system somewhere performs HTML-decoding on local filesystem paths.

Renamed the working copy directory and everything started working.

来源：https://stackoverflow.com/questions/20490857/visual-studio-getting-error-metadata-file-xyz-could-not-be-found-after-edi