It seems that with Xcode 8, on viewDidLoad, all viewcontroller subviews have the same size of 1000x1000. Strange thing, but okay, viewDidLoad has never been the better place to correctly size the views.
But viewDidLayoutSubviews is!
And on my current project, I try to print the size of a button:
- (void)viewDidLayoutSubviews {
[super viewDidLayoutSubviews];
NSLog(@"%@", self.myButton);
}
The log shows a size of (1000x1000) for myButton! Then if I log on a button click, for example, the log shows a normal size.
I'm using autolayout.
Is it a bug?
Now, Interface Builder lets the user change dynamically the size of every view controllers in storyboard, to simulate the size of a certain device.
Before this functionality, the user should set manually each view controller size. So the view controller was saved with a certain size, which was used in initWithCoder to set the initial frame.
Now, it seems that initWithCoder do not use the size defined in storyboard, and define a 1000x1000 px size for the viewcontroller view & all its subviews.
This is not a problem, because views should always use either of these layout solutions:
autolayout, and all the constraints will layout correctly your views
autoresizingMask, which will layout each view which doesn't have any constraint attached to (note autolayout and margin constraints are now compatible in the same view \o/ !)
But this is a problem for all layout stuff related to the view layer, like cornerRadius, since neither autolayout nor autoresizing mask applies to layer properties.
To answer this problem, the common way is to use viewDidLayoutSubviews if you are in the controller, or layoutSubview if you are in a view. At this point (don't forget to call their super relative methods), you are pretty sure that all layout stuff has been done!
Pretty sure? Hum... not totally, I've remarked, and that's why I asked this question, in some cases the view still has its 1000x1000 size on this method. I think there is no answer to my own question. To give the maximum information about it:
1- it happends only when laying out cells! In UITableViewCell & UICollectionViewCell subclasses, layoutSubview won't be called after subviews would be correctly layed out.
2- As @EugenDimboiu remarked (please upvote his answer if useful for you), calling [myView layoutIfNeeded] on the not-layed out subview will layout it correctly just in time.
- (void)layoutSubviews {
[super layoutSubviews];
NSLog (self.myLabel); // 1000x1000 size
[self.myLabel layoutIfNeeded];
NSLog (self.myLabel); // normal size
}
3- To my opinion, this is definitely a bug. I've submitted it to radar (id 28562874).
PS: I'm not english native, so feel free to edit my post if my grammar should be corrected ;)
PS2: If you have any better solution, feel free not write another answer. I'll move the accepted answer.
Are you using rounded corners for your button ?
Try calling layoutIfNeeded() before.
Solution: Wrap everything inside viewDidLayoutSubviews in DispatchQueue.main.async.
// swift 3
override func viewDidLayoutSubviews() {
super.viewDidLayoutSubviews()
DispatchQueue.main.async {
// do stuff here
}
}
I know this wasn't your exact question, but I ran into a similar problem where as on the update some of my views were messed up despite having the correct frame size in viewDidLayoutSubviews. According to iOS 10 Release notes:
"Sending layoutIfNeeded to a view is not expected to move the view, but in earlier releases, if the view had translatesAutoresizingMaskIntoConstraints set to NO, and if it was being positioned by constraints, layoutIfNeeded would move the view to match the layout engine before sending layout to the subtree. These changes correct this behavior, and the receiver’s position and usually its size won’t be affected by layoutIfNeeded.
Some existing code may be relying on this incorrect behavior that is now corrected. There is no behavior change for binaries linked before iOS 10, but when building on iOS 10 you may need to correct some situations by sending -layoutIfNeeded to a superview of the translatesAutoresizingMaskIntoConstraints view that was the previous receiver, or else positioning and sizing it before (or after, depending on your desired behavior) layoutIfNeeded.
Third party apps with custom UIView subclasses using Auto Layout that override layoutSubviews and dirty layout on self before calling super are at risk of triggering a layout feedback loop when they rebuild on iOS 10. When they are correctly sent subsequent layoutSubviews calls they must be sure to stop dirtying layout on self at some point (note that this call was skipped in release prior to iOS 10)."
Essentially you cannot call layoutIfNeeded on a child object of the View if you are using translatesAutoresizingMaskIntoConstraints - now calling layoutIfNeeded has to be on the superView, and you can still call this in viewDidLayoutSubviews.
If the frames are not correct in layoutSubViews (which they are not) you can dispatch async a bit of code on the main thread. This gives the system some time to do the layout. When the block you dispatch is executed, the frames have their proper sizes.
This fixed the (ridiculously annoying) issue for me:
- (void) viewDidLayoutSubviews {
[super viewDidLayoutSubviews];
self.view.frame = CGRectMake(0,0,[[UIScreen mainScreen] bounds].size.width,[[UIScreen mainScreen] bounds].size.height);
}
Edit/Note: This is for a full screen ViewController.
Actually viewDidLayoutSubviews also is not the best place to set frame of your view. As far as I understood, from now on the only place it should be done is layoutSubviews method in the actual view's code. I wish I wasn't right, someone correct me please if it is not true!
I already reported this issue to apple, this issue exist since a long time, when you are initializing UIViewController from Xib, but i found quite nice workaround. In addition to that i found that issue in some cases when layoutIfNeeded on UICollectionView and UITableView when datasource is not set in initial moment, and needed also swizzle it.
extension UIViewController {
open override class func initialize() {
if self !== UIViewController.self {
return
}
DispatchQueue.once(token: "io.inspace.uiviewcontroller.swizzle") {
ins_applyFixToViewFrameWhenLoadingFromNib()
}
}
@objc func ins_setView(view: UIView!) {
// View is loaded from xib file
if nibBundle != nil && storyboard == nil && !view.frame.equalTo(UIScreen.main.bounds) {
view.frame = UIScreen.main.bounds
view.layoutIfNeeded()
}
ins_setView(view: view)
}
private class func ins_applyFixToViewFrameWhenLoadingFromNib() {
UIViewController.swizzle(originalSelector: #selector(setter: UIViewController.view),
with: #selector(UIViewController.ins_setView(view:)))
UICollectionView.swizzle(originalSelector: #selector(UICollectionView.layoutSubviews),
with: #selector(UICollectionView.ins_layoutSubviews))
UITableView.swizzle(originalSelector: #selector(UITableView.layoutSubviews),
with: #selector(UITableView.ins_layoutSubviews))
}
}
extension UITableView {
@objc fileprivate func ins_layoutSubviews() {
if dataSource == nil {
super.layoutSubviews()
} else {
ins_layoutSubviews()
}
}
}
extension UICollectionView {
@objc fileprivate func ins_layoutSubviews() {
if dataSource == nil {
super.layoutSubviews()
} else {
ins_layoutSubviews()
}
}
}
Dispatch once extension:
extension DispatchQueue {
private static var _onceTracker = [String]()
/**
Executes a block of code, associated with a unique token, only once. The code is thread safe and will
only execute the code once even in the presence of multithreaded calls.
- parameter token: A unique reverse DNS style name such as com.vectorform.<name> or a GUID
- parameter block: Block to execute once
*/
public class func once(token: String, block: (Void) -> Void) {
objc_sync_enter(self); defer { objc_sync_exit(self) }
if _onceTracker.contains(token) {
return
}
_onceTracker.append(token)
block()
}
}
Swizzle extension:
extension NSObject {
@discardableResult
class func swizzle(originalSelector: Selector, with selector: Selector) -> Bool {
var originalMethod: Method?
var swizzledMethod: Method?
originalMethod = class_getInstanceMethod(self, originalSelector)
swizzledMethod = class_getInstanceMethod(self, selector)
if originalMethod != nil && swizzledMethod != nil {
method_exchangeImplementations(originalMethod!, swizzledMethod!)
return true
}
return false
}
}
My issue was solved by changing the usage from
-(void)viewDidLayoutSubviews{
[super viewDidLayoutSubviews];
self.viewLoginMailTop.constant = -self.viewLoginMail.bounds.size.height;
}
to
-(void)viewWillLayoutSubviews{
[super viewWillLayoutSubviews];
self.viewLoginMailTop.constant = -self.viewLoginMail.bounds.size.height;
}
So, from Did to Will
Super weird
Better solution for me.
protocol LayoutComplementProtocol {
func didLayoutSubviews(with targetView_: UIView)
}
private class LayoutCaptureView: UIView {
var targetView: UIView!
var layoutComplements: [LayoutComplementProtocol] = []
override func layoutSubviews() {
super.layoutSubviews()
for layoutComplement in self.layoutComplements {
layoutComplement.didLayoutSubviews(with: self.targetView)
}
}
}
extension UIView {
func add(layoutComplement layoutComplement_: LayoutComplementProtocol) {
func findLayoutCapture() -> LayoutCaptureView {
for subView in self.subviews {
if subView is LayoutCaptureView {
return subView as? LayoutCaptureView
}
}
let layoutCapture = LayoutCaptureView(frame: CGRect(x: -100, y: -100, width: 10, height: 10)) // not want to show, want to have size
layoutCapture.targetView = self
self.addSubview(layoutCapture)
return layoutCapture
}
let layoutCapture = findLayoutCapture()
layoutCapture.layoutComplements.append(layoutComplement_)
}
}
Using
class CircleShapeComplement: LayoutComplementProtocol {
func didLayoutSubviews(with targetView_: UIView) {
targetView_.layer.cornerRadius = targetView_.frame.size.height / 2
}
}
myButton.add(layoutComplement: CircleShapeComplement())
Override layoutSublayers(of layer: CALayer) instead of layoutSubviews in cell subview to have correct frames
As per new update in ios this is actually a bug but we can reduce this by using -
If you are using xib with autolayout in your project then you have to just update frame in autolayout setting please find image for this .
来源：https://stackoverflow.com/questions/39578530/since-xcode-8-and-ios10-views-are-not-sized-properly-on-viewdidlayoutsubviews