问题
My basic logic is to have an infinite loop running somewhere and test it as best as possible. The reason for having an infinite loop is not important (main loop for games, daemon-like logic...) and I'm more asking about best practices regarding a situation like that.
Let's take this code for example:
module Blah
extend self
def run
some_initializer_method
loop do
some_other_method
yet_another_method
end
end
end
I want to test the method Blah.run using Rspec (also I use RR, but plain rspec would be an acceptable answer).
I figure the best way to do it would be to decompose a bit more, like separating the loop into another method or something:
module Blah
extend self
def run
some_initializer_method
do_some_looping
end
def do_some_looping
loop do
some_other_method
yet_another_method
end
end
end
... this allows us to test run and mock the loop... but at some point the code inside the loop needs to be tested.
So what would you do in such a situation?
Simply not testing this logic, meaning test some_other_method & yet_another_method but not do_some_looping ?
Have the loop break at some point via a mock?
... something else?
回答1:
What might be more practical is to execute the loop in a separate thread, assert that everything is working correctly, and then terminate the thread when it is no longer required.
thread = Thread.new do
Blah.run
end
assert_equal 0, Blah.foo
thread.kill
回答2:
How about having the body of the loop in a separate method, like calculateOneWorldIteration? That way you can spin the loop in the test as needed. And it doesn’t hurt the API, it’s quite a natural method to have in the public interface.
回答3:
in rspec 3.3, add this line
allow(subject).to receive(:loop).and_yield
to your before hook will simple yield to the block without any looping
回答4:
You can not test that something that runs forever.
When faced with a section of code that is difficult (or impossible) to test you should:-
- Refactor to isolate the difficult to test part of the code. Make the untestable parts tiny and trivial. Comment to ensure they are not later expanded to become non-trivial
- Unit test the other parts, which are now separated from the difficult to test section
- The difficult to test part would be covered by an integration or acceptance test
If the main loop in your game only goes around once, this will be immediately obvious when you run it.
回答5:
What about mocking the loop so that it gets executed only the number of times you specify ?
Module Object
private
def loop
3.times { yield }
end
end
Of course, you mock this only in your specs.
回答6:
I know this is a little old, but you can also use the yields method to fake a block and pass a single iteration to a loop method. This should allow you to test the methods you're calling within your loop without actually putting it into an infinite loop.
require 'test/unit'
require 'mocha'
class Something
def test_method
puts "test_method"
loop do
puts String.new("frederick")
end
end
end
class LoopTest < Test::Unit::TestCase
def test_loop_yields
something = Something.new
something.expects(:loop).yields.with() do
String.expects(:new).returns("samantha")
end
something.test_method
end
end
# Started
# test_method
# samantha
# .
# Finished in 0.005 seconds.
#
# 1 tests, 2 assertions, 0 failures, 0 errors
回答7:
I almost always use a catch/throw construct to test infinite loops.
Raising an error may also work, but that's not ideal especially if your loop's block rescue all errors, including Exceptions. If your block doesn't rescue Exception (or some other error class), then you can subclass Exception (or another non-rescued class) and rescue your subclass:
Exception example
Setup
class RspecLoopStop < Exception; end
Test
blah.stub!(:some_initializer_method)
blah.should_receive(:some_other_method)
blah.should_receive(:yet_another_method)
# make sure it repeats
blah.should_receive(:some_other_method).and_raise RspecLoopStop
begin
blah.run
rescue RspecLoopStop
# all done
end
Catch/throw example:
blah.stub!(:some_initializer_method)
blah.should_receive(:some_other_method)
blah.should_receive(:yet_another_method)
blah.should_receive(:some_other_method).and_throw :rspec_loop_stop
catch :rspec_loop_stop
blah.run
end
When I first tried this, I was concerned that using should_receive a second time on :some_other_method would "overwrite" the first one, but this is not the case. If you want to see for yourself, add blocks to should_receive to see if it's called the expected number of times:
blah.should_receive(:some_other_method) { puts 'received some_other_method' }
回答8:
:) I had this query a few months ago.
The short answer is there is no easy way to test that. You test drive the internals of the loop. Then you plonk it into a loop method & do a manual test that the loop works till the terminating condition occurs.
回答9:
The easiest solution I found is to yield the loop one time and than return. I've used mocha here.
require 'spec_helper'
require 'blah'
describe Blah do
it 'loops' do
Blah.stubs(:some_initializer_method)
Blah.stubs(:some_other_method)
Blah.stubs(:yet_another_method)
Blah.expects(:loop).yields().then().returns()
Blah.run
end
end
We're expecting that the loop is actually executed and it's ensured it will exit after one iteration.
Nevertheless as stated above it's good practice to keep the looping method as small and stupid as possible.
Hope this helps!
回答10:
Our solution to testing a loop that only exits on signals was to stub the exit condition method to return false the first time but true the second time, ensuring the loop is only executed once.
Class with infinite loop:
class Scheduling::Daemon
def run
loop do
if daemon_received_stop_signal?
break
end
# do stuff
end
end
end
spec testing the behaviour of the loop:
describe Scheduling::Daemon do
describe "#run" do
before do
Scheduling::Daemon.should_receive(:daemon_received_stop_signal?).
and_return(false, true) # execute loop once then exit
end
it "does stuff" do
Scheduling::Daemon.run
# assert stuff was done
end
end
end
来源：https://stackoverflow.com/questions/5717813/what-is-the-best-practice-when-it-comes-to-testing-infinite-loops