Cross compiling a kernel module

问题

I'm trying to cross compile a helloworld kernel (2.6.x) module for ARM architecture on my intel x86 host.

The codesourcery tool chain for ARM is located at: /home/ravi/workspace/hawk/arm-2009q3

The kernel source is located at :/home/ravi/workspace/hawk/linux-omapl1

My Makefile:

ARCH=arm
CROSS_COMPILE=arm-none-linux-gnueabi
obj-m := Hello.o
KDIR := /home/ravi/workspace/hawk/linux-omapl1
PWD := $(shell pwd)
default:
          $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
clean:
          $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) clean

When i run make, the .ko produced is that of my host machine which means the makefile is invoking the native compiler instead of the cross compiler.What am I doing wrong? The cross compiler's binaries are in my path.

回答1:

Putting ARCH and CROSS_COMPILE in the Makefile doesn't work. You need to put them on the command line:

make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-

回答2:

Replace

ARCH=arm
CROSS_COMPILE=arm-none-linux-gnueabi

export ARCH:=arm
export CROSS_COMPILE:=arm-none-linux-gnueabi-

this will also work if you do not want to give these parameter command line each time.

回答3:

Sidenote: SUBDIRS= is deprecated in favor of M=.

回答4:

could you try, you forgot to add ARCH and CROSS_COMPILE into the default and clean

ARCH=arm
COMPILER=arm-none-linux-gnueabi
obj-m := Hello.o
KERNELDIR := /home/ravi/workspace/hawk/linux-omapl1
PWD := $(shell pwd)
default:
    $(MAKE) -C $(KERNELDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(COMPILER) modules

clean:
    $(MAKE) -C $(KERNELDIR) M=$(PWD) ARCH=$(ARCH) clean

回答5:

adding export at the end of your Makefile variable declarations will make them available to subshells. and add the dash to the CROSS_COMPILE prefix as JayM pointed out, and M instead of SUBDIRS as user502515 answered.

and it's generally a good idea to use := rather than = in a Makefile, so the variable only gets interpolated once. really doesn't matter in this particular case though.

ARCH := arm
CROSS_COMPILE := arm-none-linux-gnueabi-
obj-m := Hello.o
KDIR := /home/ravi/workspace/hawk/linux-omapl1
PWD := $(shell pwd)
export
default:
          $(MAKE) -C $(KDIR) M=$(PWD) modules
clean:
          $(MAKE) -C $(KDIR) M=$(PWD) clean

回答6:

MODULES := hola_kern.o

#guest architecture
ARCH := arm

CROSS_COMPILE := arm-linux-gnueabi-
obj-m := $(MODULES)

#path of the arm compiled kernel
ROOTDIR := /home/aldo/c/proyectos/prefixa/work/kernels/linux-omap-5f0a6e2

MAKEARCH := $(MAKE) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE)

all: modules
modules:
    $(MAKEARCH) -C $(ROOTDIR) M=${shell pwd} modules

clean:
    $(MAKEARCH) -C $(ROOTDIR) M=${shell pwd} clean

来源：https://stackoverflow.com/questions/3467850/cross-compiling-a-kernel-module

标签

makefile

cross-compiling

embedded-linux

kernel-module

linux-toolchain