What's the difference between epoll, poll, threadpool?

我与影子孤独终老i 提交于 2019-11-26 22:28:07

问题


Could someone explain what the difference is between epoll, poll and threadpool?

  • What are the pros / cons?
  • Any suggestions for frameworks?
  • Any suggestions for simple/basic tutorials?
  • It seems that epoll and poll are Linux-specific... Is there an equivalent alternative for Windows?

回答1:


Threadpool does not really fit into the same category as poll and epoll, so I will assume you are referring to threadpool as in "threadpool to handle many connections with one thread per connection".

Pros and cons

  • threadpool
    • Reasonably efficient for small and medium concurrency, can even outperform other techniques.
    • Makes use of multiple cores.
    • Does not scale well beyond "several hundreds" even though some systems (e.g. Linux) can in principle schedule 100,000s of threads just fine.
    • Naive implementation exhibits "thundering herd" problem.
    • Apart from context switching and thundering herd, one must consider memory. Each thread has a stack (typically at least a megabyte). A thousand threads therefore take a gigabyte of RAM just for stack. Even if that memory is not committed, it still takes away considerable address space under a 32 bit OS (not really an issue under 64 bits).
    • Threads can actually use epoll, though the obvious way (all threads block on epoll_wait) is of no use, because epoll will wake up every thread waiting on it, so it will still have the same issues.
      • Optimal solution: single thread listens on epoll, does the input multiplexing, and hands complete requests to a threadpool.
      • futex is your friend here, in combination with e.g. a fast forward queue per thread. Although badly documented and unwieldy, futex offers exactly what's needed. epoll may return several events at a time, and futex lets you efficiently and in a precisely controlled manner wake N blocked threads at a time (N being min(num_cpu, num_events) ideally), and in the best case it does not involve an extra syscall/context switch at all.
      • Not trivial to implement, takes some care.
  • fork (a.k.a. old fashion threadpool)
    • Reasonably efficient for small and medium concurrency.
    • Does not scale well beyond "few hundreds".
    • Context switches are much more expensive (different address spaces!).
    • Scales significantly worse on older systems where fork is much more expensive (deep copy of all pages). Even on modern systems fork is not "free", although the overhead is mostly coalesced by the copy-on-write mechanism. On large datasets which are also modified, a considerable number of page faults following fork may negatively impact performance.
    • However, proven to work reliably for over 30 years.
    • Ridiculously easy to implement and rock solid: If any of the processes crash, the world does not end. There is (almost) nothing you can do wrong.
    • Very prone to "thundering herd".
  • poll / select
    • Two flavours (BSD vs. System V) of more or less the same thing.
    • Somewhat old and slow, somewhat awkward usage, but there is virtually no platform that does not support them.
    • Waits until "something happens" on a set of descriptors
      • Allows one thread/process to handle many requests at a time.
      • No multi-core usage.
    • Needs to copy list of descriptors from user to kernel space every time you wait. Needs to perform a linear search over descriptors. This limits its effectiveness.
    • Does not scale well to "thousands" (in fact, hard limit around 1024 on most systems, or as low as 64 on some).
    • Use it because it's portable if you only deal with a dozen descriptors anyway (no performance issues there), or if you must support platforms that don't have anything better. Don't use otherwise.
    • Conceptually, a server becomes a little more complicated than a forked one, since you now need to maintain many connections and a state machine for each connection, and you must multiplex between requests as they come in, assemble partial requests, etc. A simple forked server just knows about a single socket (well, two, counting the listening socket), reads until it has what it wants or until the connection is half-closed, and then writes whatever it wants. It doesn't worry about blocking or readiness or starvation, nor about some unrelated data coming in, that's some other process's problem.
  • epoll
    • Linux only.
    • Concept of expensive modifications vs. efficient waits:
      • Copies information about descriptors to kernel space when descriptors are added (epoll_ctl)
        • This is usually something that happens rarely.
      • Does not need to copy data to kernel space when waiting for events (epoll_wait)
        • This is usually something that happens very often.
      • Adds the waiter (or rather its epoll structure) to descriptors' wait queues
        • Descriptor therefore knows who is listening and directly signals waiters when appropriate rather than waiters searching a list of descriptors
        • Opposite way of how poll works
        • O(1) with small k (very fast) in respect of the number of descriptors, instead of O(n)
    • Works very well with timerfd and eventfd (stunning timer resolution and accuracy, too).
    • Works nicely with signalfd, eliminating the awkward handling of signals, making them part of the normal control flow in a very elegant manner.
    • An epoll instance can host other epoll instances recursively
    • Assumptions made by this programming model:
      • Most descriptors are idle most of the time, few things (e.g. "data received", "connection closed") actually happen on few descriptors.
      • Most of the time, you don't want to add/remove descriptors from the set.
      • Most of the time, you're waiting on something to happen.
    • Some minor pitfalls:
      • A level-triggered epoll wakes all threads waiting on it (this is "works as intended"), therefore the naive way of using epoll with a threadpool is useless. At least for a TCP server, it is no big issue since partial requests would have to be assembled first anyway, so a naive multithreaded implementation won't do either way.
      • Does not work as one would expect with file read/writes ("always ready").
      • Could not be used with AIO until recently, now possible via eventfd, but requires a (to date) undocumented function.
      • If the above assumptions are not true, epoll can be inefficient, and poll may perform equally or better.
      • epoll cannot do "magic", i.e. it is still necessarily O(N) in respect to the number of events that occur.
      • However, epoll plays well with the new recvmmsg syscall, since it returns several readiness notifications at a time (as many as are available, up to whatever you specify as maxevents). This makes it possible to receive e.g. 15 EPOLLIN notifications with one syscall on a busy server, and read the corresponding 15 messages with a second syscall (a 93% reduction in syscalls!). Unluckily, all operations on one recvmmsg invokation refer to the same socket, so it is mostly useful for UDP based services (for TCP, there would have to be a kind of recvmmsmsg syscall which also takes a socket descriptor per item!).
      • Descriptors should always be set to nonblocking and one should check for EAGAIN even when using epoll because there are exceptional situations where epoll reports readiness and a subsequent read (or write) will still block. This is also the case for poll/select on some kernels (though it has presumably been fixed).
      • With a naive implementation, starvation of slow senders is possible. When blindly reading until EAGAIN is returned upon receiving a notification, it is possible to indefinitely read new incoming data from a fast sender while completely starving a slow sender (as long as data keeps coming in fast enough, you might not see EAGAIN for quite a while!). Applies to poll/select in the same manner.
      • Edge-triggered mode has some quirks and unexpected behaviour in some situations, since the documentation (both man pages and TLPI) is vague ("probably", "should", "might") and sometimes misleading about its operation.
        The documentation states that several threads waiting on one epoll are all signalled. It further states that a notification tells you whether IO activity has happened since the last call to epoll_wait (or since the descriptor was opened, if there was no previous call).
        The true, observable behaviour in edge-triggered mode is much closer to "wakes the first thread that has called epoll_wait, signalling that IO activity has happened since anyone last called either epoll_wait or a read/write function on the descriptor, and thereafter only reports readiness again to the next thread calling or already blocked in epoll_wait, for any operations happening after anyone called a of read (or write) function on the descriptor". It kind of makes sense, too... it just isn't exactly what the documentation suggests.
  • kqueue
    • BSD analogon to epoll, different usage, similar effect.
    • Also works on Mac OS X
    • Rumoured to be faster (I've never used it, so cannot tell if that is true).
    • Registers events and returns a result set in a single syscall.
  • IO Completion ports
    • Epoll for Windows, or rather epoll on steroids.
    • Works seamlessly with everything that is waitable or alertable in some way (sockets, waitable timers, file operations, threads, processes)
    • If Microsoft got one thing right in Windows, it is completion ports:
      • Works worry-free out of the box with any number of threads
      • No thundering herd
      • Wakes threads one by one in a LIFO order
      • Keeps caches warm and minimizes context switches
      • Respects number of processors on machine or delivers the desired number of workers
    • Allows the application to post events, which lends itself to a very easy, failsafe, and efficient parallel work queue implementation (schedules upwards of 500,000 tasks per second on my system).
    • Minor disadvantage: Does not easily remove file descriptors once added (must close and re-open).

Frameworks

libevent -- The 2.0 version also supports completion ports under Windows.

ASIO -- If you use Boost in your project, look no further: You already have this available as boost-asio.

Any suggestions for simple/basic tutorials?

The frameworks listed above come with extensive documentation. The Linux docs and MSDN explains epoll and completion ports extensively.

Mini-tutorial for using epoll:

int my_epoll = epoll_create(0);  // argument is ignored nowadays

epoll_event e;
e.fd = some_socket_fd; // this can in fact be anything you like

epoll_ctl(my_epoll, EPOLL_CTL_ADD, some_socket_fd, &e);

...
epoll_event evt[10]; // or whatever number
for(...)
    if((num = epoll_wait(my_epoll, evt, 10, -1)) > 0)
        do_something();

Mini-tutorial for IO completion ports (note calling CreateIoCompletionPort twice with different parameters):

HANDLE iocp = CreateIoCompletionPort(INVALID_HANDLE_VALUE, 0, 0, 0); // equals epoll_create
CreateIoCompletionPort(mySocketHandle, iocp, 0, 0); // equals epoll_ctl(EPOLL_CTL_ADD)

OVERLAPPED o;
for(...)
    if(GetQueuedCompletionStatus(iocp, &number_bytes, &key, &o, INFINITE)) // equals epoll_wait()
        do_something();

(These mini-tuts omit all kind of error checking, and hopefully I didn't make any typos, but they should for the most part be ok to give you some idea.)

EDIT:
Note that completion ports (Windows) conceptually work the other way around as epoll (or kqueue). They signal, as their name suggests, completion, not readiness. That is, you fire off an asynchronous request and forget about it until some time later you're told that it has completed (either successfully nor not so much successfully, and there is the exceptional case of "completed immediately" too).
With epoll, you block until you are notified that either "some data" (possibly as little as one byte) has arrived and is available or there is sufficient buffer space so you can do a write operation without blocking. Only then, you start the actual operation, which then will hopefully not block (other than you would expect, there is no strict guarantee for that -- it is therefore a good idea to set descriptors to nonblocking and check for EAGAIN [EAGAIN and EWOULDBLOCK for sockets, because oh joy, the standard allows for two different error values]).



来源:https://stackoverflow.com/questions/4093185/whats-the-difference-between-epoll-poll-threadpool

易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!