How to convert milliseconds to “hh:mm:ss” format?

问题

I\'m confused. After stumbling upon this thread, I tried to figure out how to format a countdown timer that had the format hh:mm:ss.

Here\'s my attempt -

//hh:mm:ss
String.format(\"%02d:%02d:%02d\", 
    TimeUnit.MILLISECONDS.toHours(millis),
    TimeUnit.MILLISECONDS.toMinutes(millis) - 
    TimeUnit.MINUTES.toMinutes(TimeUnit.MILLISECONDS.toHours(millis)),
    TimeUnit.MILLISECONDS.toSeconds(millis) - 
    TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(millis)));

So, when I try a value like 3600000ms, I get 01:59:00, which is wrong since it should be 01:00:00. Obviously there\'s something wrong with my logic, but at the moment, I cannot see what it is!

Can anyone help?

Edit -

Fixed it. Here\'s the right way to format milliseconds to hh:mm:ss format -

//hh:mm:ss
String.format(\"%02d:%02d:%02d\", 
    TimeUnit.MILLISECONDS.toHours(millis),
    TimeUnit.MILLISECONDS.toMinutes(millis) - 
    TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(millis)),
    TimeUnit.MILLISECONDS.toSeconds(millis) - 
    TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(millis))));

The problem was this TimeUnit.MINUTES.toMinutes(TimeUnit.MILLISECONDS.toHours(millis)). It should have been this TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(millis)) instead.

回答1:

You were really close:

String.format("%02d:%02d:%02d", 
TimeUnit.MILLISECONDS.toHours(millis),
TimeUnit.MILLISECONDS.toMinutes(millis) -  
TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(millis)), // The change is in this line
TimeUnit.MILLISECONDS.toSeconds(millis) - 
TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(millis)));

You were converting hours to millisseconds using minutes instead of hours.

BTW, I like your use of the TimeUnit API :)

Here's some test code:

public static void main(String[] args) throws ParseException {
    long millis = 3600000;
    String hms = String.format("%02d:%02d:%02d", TimeUnit.MILLISECONDS.toHours(millis),
            TimeUnit.MILLISECONDS.toMinutes(millis) - TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(millis)),
            TimeUnit.MILLISECONDS.toSeconds(millis) - TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(millis)));
    System.out.println(hms);
}

Output:

01:00:00

I realised that my code above can be greatly simplified by using a modulus division instead of subtraction:

String hms = String.format("%02d:%02d:%02d", TimeUnit.MILLISECONDS.toHours(millis),
    TimeUnit.MILLISECONDS.toMinutes(millis) % TimeUnit.HOURS.toMinutes(1),
    TimeUnit.MILLISECONDS.toSeconds(millis) % TimeUnit.MINUTES.toSeconds(1));

Still using the TimeUnit API for all magic values, and gives exactly the same output.

回答2:

The generic method for this is fairly simple:

public static String convertSecondsToHMmSs(long seconds) {
    long s = seconds % 60;
    long m = (seconds / 60) % 60;
    long h = (seconds / (60 * 60)) % 24;
    return String.format("%d:%02d:%02d", h,m,s);
}

回答3:

If you are using apache commons:

DurationFormatUtils.formatDuration(timeInMS, "HH:mm:ss,SSS");

回答4:

// New date object from millis
Date date = new Date(millis);
// formattter 
SimpleDateFormat formatter= new SimpleDateFormat("HH:mm:ss.SSS");
formatter.setTimeZone(TimeZone.getTimeZone("UTC"));
// Pass date object
String formatted = formatter.format(date );

See runnable example using input of 1200 ms.

回答5:

I used this:

String.format("%1$tH:%1$tM:%1$tS.%1$tL", millis);

See description of class Formatter.

See runnable example using input of 2400 ms.

回答6:

DateFormat df = new SimpleDateFormat("HH:mm:ss");
String formatted = df.format(aDateObject);

回答7:

Test results for the 4 implementations

Having to do a lot of formatting for huge data, needed the best performance, so here are the (surprising) results:

for (int i = 0; i < 1000000; i++) { FUNCTION_CALL }

Durations:

combinationFormatter: 196 millis
formatDuration: 272 millis
apacheFormat: 754 millis

formatTimeUnit: 2216 millis

public static String apacheFormat(long millis) throws ParseException {
    return DurationFormatUtils.formatDuration(millis, "HH:mm:ss");
}

public static String formatTimeUnit(long millis) throws ParseException {
String formatted = String.format(
        "%02d:%02d:%02d",
        TimeUnit.MILLISECONDS.toHours(millis),
        TimeUnit.MILLISECONDS.toMinutes(millis)
                - TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(millis)),
        TimeUnit.MILLISECONDS.toSeconds(millis)
                - TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(millis)));
    return formatted;
}

public static String formatDuration(final long millis) {
    long seconds = (millis / 1000) % 60;
    long minutes = (millis / (1000 * 60)) % 60;
    long hours = millis / (1000 * 60 * 60);

    StringBuilder b = new StringBuilder();
    b.append(hours == 0 ? "00" : hours < 10 ? String.valueOf("0" + hours) : 
    String.valueOf(hours));
    b.append(":");
    b.append(minutes == 0 ? "00" : minutes < 10 ? String.valueOf("0" + minutes) :     
    String.valueOf(minutes));
    b.append(":");
    b.append(seconds == 0 ? "00" : seconds < 10 ? String.valueOf("0" + seconds) : 
    String.valueOf(seconds));
    return b.toString();
}

public static String combinationFormatter(final long millis) {
    long seconds = TimeUnit.MILLISECONDS.toSeconds(millis)
            - TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(millis));
    long minutes = TimeUnit.MILLISECONDS.toMinutes(millis)
            - TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(millis));
    long hours = TimeUnit.MILLISECONDS.toHours(millis);

    StringBuilder b = new StringBuilder();
    b.append(hours == 0 ? "00" : hours < 10 ? String.valueOf("0" + hours) : 
    String.valueOf(hours));
    b.append(":");
    b.append(minutes == 0 ? "00" : minutes < 10 ? String.valueOf("0" + minutes) : 
    String.valueOf(minutes));
        b.append(":");
    b.append(seconds == 0 ? "00" : seconds < 10 ? String.valueOf("0" + seconds) : 
    String.valueOf(seconds));
    return b.toString(); 
 }

回答8:

The code below does the conversion in both way

23:59:58:999 to 86398999

and than

86398999 to 23:59:58:999

import java.util.concurrent.TimeUnit;

public class TimeUtility {

    public static void main(String[] args) {

        long currentDateTime = System.currentTimeMillis();

        String strTest = "23:59:58:999";
        System.out.println(strTest);

        long l = strToMilli(strTest);
        System.out.println(l);
        l += 1;
        String str = milliToString(l);
        System.out.println(str);
    }

    /**
     * convert a time string into the equivalent long milliseconds
     *
     * @param strTime string fomratted as HH:MM:SS:MSMS i.e. "23:59:59:999"
     * @return long integer like 86399999
     */
    public static long strToMilli(String strTime) {
        long retVal = 0;
        String hour = strTime.substring(0, 2);
        String min = strTime.substring(3, 5);
        String sec = strTime.substring(6, 8);
        String milli = strTime.substring(9, 12);
        int h = Integer.parseInt(hour);
        int m = Integer.parseInt(min);
        int s = Integer.parseInt(sec);
        int ms = Integer.parseInt(milli);

        String strDebug = String.format("%02d:%02d:%02d:%03d", h, m, s, ms);
        //System.out.println(strDebug);
        long lH = h * 60 * 60 * 1000;
        long lM = m * 60 * 1000;
        long lS = s * 1000;

        retVal = lH + lM + lS + ms;
        return retVal;
    }

    /**
     * convert time in milliseconds to the corresponding string, in case of day
     * rollover start from scratch 23:59:59:999 + 1 = 00:00:00:000
     *
     * @param millis the number of milliseconds corresponding to tim i.e.
     *               34137999 that can be obtained as follows;
     *               <p>
     *               long lH = h * 60 * 60 * 1000; //hour to milli
     *               <p>
     *               long lM = m * 60 * 1000; // minute to milli
     *               <p>
     *               long lS = s * 1000; //seconds to milli
     *               <p>
     *               millis = lH + lM + lS + ms;
     * @return a string formatted as HH:MM:SS:MSMS i.e. "23:59:59:999"
     */
    private static String milliToString(long millis) {

        long hrs = TimeUnit.MILLISECONDS.toHours(millis) % 24;
        long min = TimeUnit.MILLISECONDS.toMinutes(millis) % 60;
        long sec = TimeUnit.MILLISECONDS.toSeconds(millis) % 60;
        //millis = millis - (hrs * 60 * 60 * 1000); //alternative way
        //millis = millis - (min * 60 * 1000);
        //millis = millis - (sec * 1000);
        //long mls = millis ;
        long mls = millis % 1000;
        String toRet = String.format("%02d:%02d:%02d:%03d", hrs, min, sec, mls);
        //System.out.println(toRet);
        return toRet;
    }
}

回答9:

Going by Bohemian's answer we need need not use TimeUnit to find a known value. Much more optimal code would be

String hms = String.format("%02d:%02d:%02d", millisLeft/(3600*1000),
                    millisLeft/(60*1000) % 60,
                    millisLeft/1000 % 60);

Hope it helps

回答10:

 public String millsToDateFormat(long mills) {

    Date date = new Date(mills);
    DateFormat formatter = new SimpleDateFormat("HH:mm:ss");
    String dateFormatted = formatter.format(date);
    return dateFormatted; //note that it will give you the time in GMT+0
}

回答11:

        String string = String.format("%02d:%02d:%02d.%03d",
            TimeUnit.MILLISECONDS.toHours(millisecend), TimeUnit.MILLISECONDS.toMinutes(millisecend) - TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(millisecend)),
            TimeUnit.MILLISECONDS.toSeconds(millisecend) - TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(millisecend)), millisecend - TimeUnit.SECONDS.toMillis(TimeUnit.MILLISECONDS.toSeconds(millisecend)));

Format: 00:00:00.000

Example: 615605 Millisecend

00:10:15.605

回答12:

The answer marked as correct has a little mistake,

String myTime = String.format("%02d:%02d:%02d",
            TimeUnit.MILLISECONDS.toHours(millis),
            TimeUnit.MILLISECONDS.toMinutes(millis) -
                    TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(millis)), // The change is in this line
            TimeUnit.MILLISECONDS.toSeconds(millis) -
                    TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(millis)));

for example this is an example of the value that i get:

417474:44:19

This is the solution to get the right format is:

String myTime =  String.format("%02d:%02d:%02d",
                //Hours
                TimeUnit.MILLISECONDS.toHours(millis) -
                        TimeUnit.DAYS.toHours(TimeUnit.MILLISECONDS.toDays(millis)),
                //Minutes
                TimeUnit.MILLISECONDS.toMinutes(millis) -
                        TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(millis)),
                //Seconds
                TimeUnit.MILLISECONDS.toSeconds(millis) -
                        TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(millis)));

getting as a result a correct format:

18:44:19

other option to get the format hh:mm:ss is just :

   Date myDate = new Date(timeinMillis);
   SimpleDateFormat formatter = new SimpleDateFormat("HH:mm:ss");
   String myTime = formatter.format(myDate);

回答13:

I tried as shown in the first answer. It works, but minus brought me into confusion. My answer by Groovy:

import static java.util.concurrent.TimeUnit.*

...

private static String formatElapsedTime(long millis) {

    int hrs = MILLISECONDS.toHours(millis) % 24
    int min = MILLISECONDS.toMinutes(millis) % 60
    int sec = MILLISECONDS.toSeconds(millis) % 60
    int mls = millis % 1000

    sprintf( '%02d:%02d:%02d (%03d)', [hrs, min, sec, mls])
}

回答14:

this worked for me, with kotlin

fun formatToDigitalClock(miliSeconds: Long): String {
        val hours = TimeUnit.MILLISECONDS.toHours(miliSeconds).toInt() % 24
        val minutes = TimeUnit.MILLISECONDS.toMinutes(miliSeconds).toInt() % 60
        val seconds = TimeUnit.MILLISECONDS.toSeconds(miliSeconds).toInt() % 60
        return when {
            hours > 0 -> String.format("%d:%02d:%02d", hours, minutes, seconds)
            minutes > 0 -> String.format("%02d:%02d", minutes, seconds)
            seconds > 0 -> String.format("00:%02d", seconds)
            else -> {
                "00:00"
            }
        }
    }

回答15:

Java 9

    Duration timeLeft = Duration.ofMillis(3600000);
    String hhmmss = String.format("%02d:%02d:%02d", 
            timeLeft.toHours(), timeLeft.toMinutesPart(), timeLeft.toSecondsPart());
    System.out.println(hhmmss);

This prints:

01:00:00

You are doing right in letting library methods do the conversions involved for you. java.time, the modern Java date and time API, or more precisely, its Duration class does it more elegantly and in a less error-prone way than TimeUnit.

The toMinutesPart and toSecondsPart methods I used were introduced in Java 9.

Java 6, 7 and 8

    long hours = timeLeft.toHours();
    timeLeft = timeLeft.minusHours(hours);
    long minutes = timeLeft.toMinutes();
    timeLeft = timeLeft.minusMinutes(minutes);
    long seconds = timeLeft.toSeconds();
    String hhmmss = String.format("%02d:%02d:%02d", hours, minutes, seconds);
    System.out.println(hhmmss);

The output is the same as above.

Question: How can that work in Java 6 and 7?

In Java 8 and later and on newer Android devices (from API level 26, I’m told) java.time comes built-in.
In Java 6 and 7 get the ThreeTen Backport, the backport of the modern classes (ThreeTen for JSR 310; see the links at the bottom).
On (older) Android use the Android edition of ThreeTen Backport. It’s called ThreeTenABP. And make sure you import the date and time classes from org.threeten.bp with subpackages.

Links

Oracle tutorial: Date Time explaining how to use java.time.
Java Specification Request (JSR) 310, where java.time was first described.
ThreeTen Backport project, the backport of java.timeto Java 6 and 7 (ThreeTen for JSR-310).
ThreeTenABP, Android edition of ThreeTen Backport
Question: How to use ThreeTenABP in Android Project, with a very thorough explanation.

回答16:

For Kotlin

val hours = String.format("%02d", TimeUnit.MILLISECONDS.toHours(milSecs))
val minutes = String.format("%02d",
                        TimeUnit.MILLISECONDS.toMinutes(milSecs) - TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(milSecs)))
val seconds = String.format("%02d",
                        TimeUnit.MILLISECONDS.toSeconds(milSecs) - TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(milSecs)))

where, milSecs is milliseconds

回答17:

Well, you could try something like this, :

public String getElapsedTimeHoursMinutesSecondsString() {       
     long elapsedTime = getElapsedTime();  
     String format = String.format("%%0%dd", 2);  
     elapsedTime = elapsedTime / 1000;  
     String seconds = String.format(format, elapsedTime % 60);  
     String minutes = String.format(format, (elapsedTime % 3600) / 60);  
     String hours = String.format(format, elapsedTime / 3600);  
     String time =  hours + ":" + minutes + ":" + seconds;  
     return time;  
 }

to convert milliseconds to a time value

来源：https://stackoverflow.com/questions/9027317/how-to-convert-milliseconds-to-hhmmss-format

标签

java

time-format

countdowntimer