- Nginx自带模块（ ngx_http_limit_req_module）
示例如下：支持不同级别限流，$binary_remote_addr为对单个IP限流，$server_name对服务限流
limit_req_zone $binary_remote_addr zone=perip:10m rate=1r/s;
limit_req_zone $server_name zone=perserver:10m rate=10r/s;
server {
...
limit_req zone=perip burst=5 nodelay;
limit_req zone=perserver burst=10;
}
- 基于OpenRestylua-resty-limit-traffic模块
resty.limit.req对请求数，基于漏桶算法的限流
# demonstrate the usage of the resty.limit.req module (alone!)
http {
lua_shared_dict my_limit_req_store 100m;
server {
location / {
access_by_lua_block {
-- well, we could put the require() and new() calls in our own Lua
-- modules to save overhead. here we put them below just for
-- convenience.
local limit_req = require "resty.limit.req"
-- limit the requests under 200 req/sec with a burst of 100 req/sec,
-- that is, we delay requests under 300 req/sec and above 200
-- req/sec, and reject any requests exceeding 300 req/sec.
local lim, err = limit_req.new("my_limit_req_store", 200, 100)
if not lim then
ngx.log(ngx.ERR,
"failed to instantiate a resty.limit.req object: ", err)
return ngx.exit(500)
end
-- the following call must be per-request.
-- here we use the remote (IP) address as the limiting key
local key = ngx.var.binary_remote_addr
local delay, err = lim:incoming(key, true)
if not delay then
if err == "rejected" then
return ngx.exit(503)
end
ngx.log(ngx.ERR, "failed to limit req: ", err)
return ngx.exit(500)
end
if delay >= 0.001 then
-- the 2nd return value holds the number of excess requests
-- per second for the specified key. for example, number 31
-- means the current request rate is at 231 req/sec for the
-- specified key.
local excess = err
-- the request exceeding the 200 req/sec but below 300 req/sec,
-- so we intentionally delay it here a bit to conform to the
-- 200 req/sec rate.
ngx.sleep(delay)
end
}
# content handler goes here. if it is content_by_lua, then you can
# merge the Lua code above in access_by_lua into your content_by_lua's
# Lua handler to save a little bit of CPU time.
}
}
}
resty.limit.conn对当前并发连接数，基于漏桶算法的限流
# demonstrate the usage of the resty.limit.conn module (alone!)
http {
lua_shared_dict my_limit_conn_store 100m;
server {
location / {
access_by_lua_block {
-- well, we could put the require() and new() calls in our own Lua
-- modules to save overhead. here we put them below just for
-- convenience.
local limit_conn = require "resty.limit.conn"
-- limit the requests under 200 concurrent requests (normally just
-- incoming connections unless protocols like SPDY is used) with
-- a burst of 100 extra concurrent requests, that is, we delay
-- requests under 300 concurrent connections and above 200
-- connections, and reject any new requests exceeding 300
-- connections.
-- also, we assume a default request time of 0.5 sec, which can be
-- dynamically adjusted by the leaving() call in log_by_lua below.
local lim, err = limit_conn.new("my_limit_conn_store", 200, 100, 0.5)
if not lim then
ngx.log(ngx.ERR,
"failed to instantiate a resty.limit.conn object: ", err)
return ngx.exit(500)
end
-- the following call must be per-request.
-- here we use the remote (IP) address as the limiting key
local key = ngx.var.binary_remote_addr
local delay, err = lim:incoming(key, true)
if not delay then
if err == "rejected" then
return ngx.exit(503)
end
ngx.log(ngx.ERR, "failed to limit req: ", err)
return ngx.exit(500)
end
if lim:is_committed() then
local ctx = ngx.ctx
ctx.limit_conn = lim
ctx.limit_conn_key = key
ctx.limit_conn_delay = delay
end
-- the 2nd return value holds the current concurrency level
-- for the specified key.
local conn = err
if delay >= 0.001 then
-- the request exceeding the 200 connections ratio but below
-- 300 connections, so
-- we intentionally delay it here a bit to conform to the
-- 200 connection limit.
-- ngx.log(ngx.WARN, "delaying")
ngx.sleep(delay)
end
}
# content handler goes here. if it is content_by_lua, then you can
# merge the Lua code above in access_by_lua into your
# content_by_lua's Lua handler to save a little bit of CPU time.
log_by_lua_block {
local ctx = ngx.ctx
local lim = ctx.limit_conn
if lim then
-- if you are using an upstream module in the content phase,
-- then you probably want to use $upstream_response_time
-- instead of ($request_time - ctx.limit_conn_delay) below.
local latency = tonumber(ngx.var.request_time) - ctx.limit_conn_delay
local key = ctx.limit_conn_key
assert(key)
local conn, err = lim:leaving(key, latency)
if not conn then
ngx.log(ngx.ERR,
"failed to record the connection leaving ",
"request: ", err)
return
end
end
}
}
}
}
resty.limit.count对不同用户进行限流，如一个用户指定时间内可以访问多少次，参考：GitHub API rate-limiting
http {
lua_shared_dict my_limit_count_store 100m;
init_by_lua_block {
require "resty.core"
}
server {
location / {
access_by_lua_block {
local limit_count = require "resty.limit.count"
-- rate: 5000 requests per 3600s
local lim, err = limit_count.new("my_limit_count_store", 5000, 3600)
if not lim then
ngx.log(ngx.ERR, "failed to instantiate a resty.limit.count object: ", err)
return ngx.exit(500)
end
-- use the Authorization header as the limiting key
local key = ngx.req.get_headers()["Authorization"] or "public"
local delay, err = lim:incoming(key, true)
if not delay then
if err == "rejected" then
ngx.header["X-RateLimit-Limit"] = "5000"
ngx.header["X-RateLimit-Remaining"] = 0
return ngx.exit(503)
end
ngx.log(ngx.ERR, "failed to limit count: ", err)
return ngx.exit(500)
end
-- the 2nd return value holds the current remaining number
-- of requests for the specified key.
local remaining = err
ngx.header["X-RateLimit-Limit"] = "5000"
ngx.header["X-RateLimit-Remaining"] = remaining
}
}
}
}
resty.limit.traffic用于组合resty.limit.req，resty.limit.conn，resty.limit.count
PS：基于Oenresty + Redis实现限流
自己练习的代码，可以根据不同情况，选用不同规则作为Redis的key
- 基于时间进行限流
- 基于IP限流（保证上游透传真实IP）
- 基于用户信息（需请求时携带用户标识）
local redis = require "resty.redis"
local red = redis:new()
red:set_timeout(1000)
local ok, err = red:connect("127.0.0.1", 6379)
local key = ngx.time()
local res, err = red:incr(key)
if res == 1 then
red:expire(key, 2)
end
red:set_keepalive(10000, 100)
if res > 500 then
return ngx.exit(ngx.HTTP_SERVICE_UNAVAILABLE)
end
来源：oschina
链接：https://my.oschina.net/u/1474632/blog/1817820