1. 技术文章
  2. gradle build fails on lint task

gradle build fails on lint task

由 对着背影说爱祢 提交于 2019-11-26 18:25:29

With 0.7.0 there comes extended support for Lint, however, it does not work always properly. (Eg. the butterknife library)

Solution is to disable aborting build on found lint errors

I took the inspiration from https://android.googlesource.com/platform/tools/base/+/e6a5b9c7c1bca4da402de442315b5ff1ada819c7

(implementation: https://android.googlesource.com/platform/tools/base/+/e6a5b9c7c1bca4da402de442315b5ff1ada819c7/build-system/gradle/src/main/groovy/com/android/build/gradle/internal/model/DefaultAndroidProject.java )

(discussion: https://plus.google.com/+AndroidDevelopers/posts/ersS6fMLxw1 )

android {
  // your build config
  defaultConfig { ... }
  signingConfigs { ... }
  compileOptions { ... }
  buildTypes { ... }
  // This is important, it will run lint checks but won't abort build
  lintOptions {
      abortOnError false
  }
}

And if you need to disable just particular Lint rule and keep the build failing on others, use this:

/*
 * Use only 'disable' or only 'enable', those configurations exclude each other
 */
android {
  lintOptions {
    // use this line to check all rules except those listed
    disable 'RuleToDisable', 'SecondRuleToDisable'
    // use this line to check just listed rules
    enable 'FirstRuleToCheck', 'LastRuleToCheck'
  }
}
panwy

if abortOnError false will not resolve your problem, you can try this.

lintOptions {
    checkReleaseBuilds false
}

You can select proper options from here 

android {
    lintOptions {
        // set to true to turn off analysis progress reporting by lint
        quiet true
        // if true, stop the gradle build if errors are found
        abortOnError false
        // if true, only report errors
        ignoreWarnings true
        // if true, emit full/absolute paths to files with errors (true by default)
        //absolutePaths true
        // if true, check all issues, including those that are off by default
        checkAllWarnings true
        // if true, treat all warnings as errors
        warningsAsErrors true
        // turn off checking the given issue id's
        disable 'TypographyFractions','TypographyQuotes'
        // turn on the given issue id's
        enable 'RtlHardcoded','RtlCompat', 'RtlEnabled'
        // check *only* the given issue id's
        check 'NewApi', 'InlinedApi'
        // if true, don't include source code lines in the error output
        noLines true
        // if true, show all locations for an error, do not truncate lists, etc.
        showAll true
        // Fallback lint configuration (default severities, etc.)
        lintConfig file("default-lint.xml")
        // if true, generate a text report of issues (false by default)
        textReport true
        // location to write the output; can be a file or 'stdout'
        textOutput 'stdout'
        // if true, generate an XML report for use by for example Jenkins
        xmlReport false
        // file to write report to (if not specified, defaults to lint-results.xml)
        xmlOutput file("lint-report.xml")
        // if true, generate an HTML report (with issue explanations, sourcecode, etc)
        htmlReport true
        // optional path to report (default will be lint-results.html in the builddir)
        htmlOutput file("lint-report.html")

        // set to true to have all release builds run lint on issues with severity=fatal
        // and abort the build (controlled by abortOnError above) if fatal issues are found
        checkReleaseBuilds true
        // Set the severity of the given issues to fatal (which means they will be
        // checked during release builds (even if the lint target is not included)
        fatal 'NewApi', 'InlineApi'
        // Set the severity of the given issues to error
        error 'Wakelock', 'TextViewEdits'
        // Set the severity of the given issues to warning
        warning 'ResourceAsColor'
        // Set the severity of the given issues to ignore (same as disabling the check)
        ignore 'TypographyQuotes'
    }
}
Asaf Pinhassi

I had some lint errors in Android Studio that occurred only when I generated a signed APK.

To avoid it, I added the following to build.gradle

android {
    lintOptions {
        checkReleaseBuilds false
    }
}
MhmdAljobairi

Add these lines to your build.gradle file:

android { 
  lintOptions { 
    abortOnError false 
  }
}

Then clean your project :D

If you want avoid the "abortInError false" option, take a look at build/lint-results-release-fatal.html file. Here are the erros detected by lint.

I hope this can help somebody!

In Android Studio v1.2, it tells you how to fix it:

Got same error on AndroidStudio version 0.51

Build was working fine and suddenly, after only changing the version code value, I got a Lint related build error.

Tried to change build.gradle, cleared AndroidStudio cache and restart, but no change.

Finally I returned to original code (causing the error), and removed android:debuggable="false" from AndroidManifest.xml, causing the build to succeed.

I added it again and it still works... Don't ask me why :S

As for me, it's a bad and quick solution for your problem :

android { 
  lintOptions { 
    abortOnError false 
  }
}

Better solution is solving problem in your code, because lint tool checks your Android project source files for potential bugs and optimization improvements for correctness, security, performance, usability, accessibility, and internationalization.

This problem most frequently occurring when:

  • Layout include unresolved symbols or missing some attribute
  • Other structural issues, such as use of deprecated elements or API calls that are not supported by the target API versions, might lead to code failing to run correctly.

Find your bugs by Inspect Code in Android Studio: Improve Your Code with Lint

Add

android.lintOptions.abortOnError false

to your app\build.gradle

标签
android
gradle
android-gradle
易学教程内所有资源均来自网络或用户发布的内容，如有违反法律规定的内容欢迎反馈！
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!