How to start tmux with several windows in different directories?

问题

I want to use a script to open a tmux session with 6 windows, each in a different directory. I started with a script I found and tried this first:

tmux new-session -s xyz   -n etc -d 'cd /etc'
tmux new-window  -t xyz:1 -n var    'cd /var/log'

But I soon found out that this will not work as I expected — the window will be closed after the shell command completes.

So my next idea was to start a new shell like this:

tmux new-session -s xyz   -n etc -d 'cd /etc; bash -i'
tmux new-window  -t xyz:1 -n var    'cd /var/log; bash -i'
tmux new-window  -t xyz:2 -n var2   'cd /var/log; bash -i'
tmux new-window  -t xyz:3 -n var3   'cd /var/log; bash -i'
tmux new-window  -t xyz:4 -n var4   'cd /var/log; bash -i'
tmux new-window  -t xyz:5 -n var5   'cd /var/log; bash -i'
tmux new-window  -t xyz:6 -n var6   'cd /var/log; bash -i'

tmux select-window -t xyz:1
tmux -2 attach-session -t xyz

This almost works. But if I start more than about 4 windows, I frequently see the following bash errors in one of the windows after startup:

bash: [: =: unary operator expected
bash: [: too many arguments
bash: [: =: unary operator expected
bash: [: =: unary operator expected
bash: [: =: unary operator expected
bash: [: =: unary operator expected
bash: [: too many arguments
bash: [: =: unary operator expected
bash: [: =: unary operator expected
bash: [: =: unary operator expected
bash: [: =: unary operator expected
bash: [: =: unary operator expected

I have no idea why this happens, but I still think that I’m not doing this right. Is there a better way to set up a tmux session over several directories?

回答1:

The shell errors are probably due to some problem in your startup files (or something they run).

As shellter commented, temporarily including the command set -vx early in your startup sequence is a good way to find out where the errors are occurring.
If you find the -vx output too verbose, you could try “printf debugging” (manually adding debug statements to your startup files until you can narrow down exactly which lines are causing the errors):

Put echo start of .bashrc and echo end of .bashrc at the start/end of your .bashrc to see if the error occurs during your .bashrc. If not, instrument your other startup files: .bash_profile/.bash_login/.profile. If the errors happen before that file, then the problem may be in /etc/profile.
Once you know which file is being processed when the errors occur, add more debug outputs around each “major block” or line to narrow down the responsible section/line.
The errors may not actually be in your startup file itself, but in a script that it runs.

Note: These debug additions need to be temporary since they will cause problems if you ever use a program that makes automated logins (e.g. rsync, SSH-based Git access, etc.) since these programs expect a “clean” connection without such debugging noise present.

There should be no need to use cd command like that in the shell-command argument given to either tmux new-session or tmux new-window.

A new window will “inherit”^† the current working directory when using new-session and new-window from the command line (i.e. when done through the tmux binary, instead of via a binding or at a tmux-: prompt). According to the CHANGES file, it looks like this has been the case since tmux 0.6 (at least for new-window).

^† This is tmux-mediated inheritance, not the parent–child inheritance that is the usual mechanism for passing along the cwd.

This script works for me with tmux 1.5:

#!/bin/bash
# var for session name (to avoid repeated occurences)
sn=xyz

# Start the session and window 0 in /etc
#   This will also be the default cwd for new windows created
#   via a binding unless overridden with default-path.
cd /etc
tmux new-session -s "$sn" -n etc -d

# Create a bunch of windows in /var/log
cd /var/log
for i in {1..6}; do
    tmux new-window -t "$sn:$i" -n "var$i"
done

# Set the default cwd for new windows (optional, otherwise defaults to session cwd)
#tmux set-option default-path /

# Select window #1 and attach to the session
tmux select-window -t "$sn:1"
tmux -2 attach-session -t "$sn"

This might also (as a side-effect) alleviate your shell startup errors since the way tmux starts a shell is different from a plain bash -i (it is more akin to bash -l, which uses your .bash_profile/.bash_login/.profile instead of (just) your .bashrc).

回答2:

Tmuxinator is also really good for this. Basically you create setup files like so:

# ~/.tmuxinator/project_name.yml
# you can make as many tabs as you wish...

project_name: Tmuxinator
project_root: ~/code/rails_project
socket_name: foo # Not needed. Remove to use default socket
rvm: 1.9.2@rails_project
pre: sudo /etc/rc.d/mysqld start
tabs:
  - editor:
      layout: main-vertical
      panes:
        - vim
        - #empty, will just run plain bash
        - top
  - shell: git pull
  - database: rails db
  - server: rails s
  - logs: tail -f logs/development.log
  - console: rails c
  - capistrano:
  - server: ssh me@myhost

Then you can start a new session with:

mux project_name

I've been using it for a while and have had a good experience for the most part.

回答3:

You can use Teamocil instead. Teamocil is a simple tool used to automatically create sessions, windows and panes in tmux with YAML files.

回答4:

~~For thous who don't install ruby~~ tmuxp is available in Python and supports both Teamocil and Tmuxinator style configuration files (in both yaml and json).

Source https://github.com/tony/tmuxp
Docs http://tmuxp.readthedocs.io/en/latest/
Pypi https://pypi.python.org/pypi/tmuxp/1.0.0

Not to mention there is a very sweet library behind it all https://github.com/tony/libtmux

 pip install --user tmuxp

add ~/.local/bin/ to your $PATH for python user install programs

# ~/.tmuxp/workbench.yaml
session_name: workbench
windows:
  - name: workbench
    layout: main-vertical
    panes:
      - vim
      - pane
      - pane

 tumxp load workbench

回答5:

I could not for the life of me get -c to work, so I worked around this by creating a script that is ran via send - this allows me to do whatever I want in each tmux session. In case it helps someone else, here it is:

#!/bin/bash
TMUX_SESSION=mystuff
TOP=~/mydir

tmux new-session -s "$TMUX_SESSION" -n $(pwd) -d

launch_my_window()
{
    WINDOW=$1
    NAME=$2
    SUBDIR=$3

    SCRIPT=$TMPDIR/tmux.sh.$WINDOW.$NAME
    tmux new-window -t "$TMUX_SESSION:$WINDOW" -n "$NAME"
    cat >$SCRIPT <<%%
cd $TOP/$SUBDIR
# do more stuff here
%%
    chmod +x $SCRIPT
    tmux send -t "$TMUX_SESSION:$WINDOW" $SCRIPT ENTER
    sleep 1
}

launch_my_window 1 "stuff"         subdir1
launch_my_window 2 "morestuff"     subdir2
launch_my_window 3 "yetmorestuff"  subdir3
#...

# Select window #1 and attach to the WINDOW
tmux select-window -t "$TMUX_SESSION:1"
tmux -2 attach-session -t "$TMUX_SESSION"

来源：https://stackoverflow.com/questions/8537149/how-to-start-tmux-with-several-windows-in-different-directories

标签

bash

tmux