1. 技术文章
  2. Eclipse No tests found using JUnit 5 caused by NoClassDefFoundError for LauncherFactory

Eclipse No tests found using JUnit 5 caused by NoClassDefFoundError for LauncherFactory

由 早过忘川 提交于 2019-11-26 15:57:11

问题


The problem

Whenever I run my projects JUnit test (using JUnit 5 with Java 9 and Eclipse Oxygen 1.a) I encounter the problem that eclipse can't find any tests.

The description

Under the run configuration, eclipse can't even find the method which is annotated with @Test, but instead only shows me "(all methods)". The following picture hopefully gives a better glimps of my setup:

Console output:

java.lang.NoClassDefFoundError: org/junit/platform/launcher/core/LauncherFactory
    at org.eclipse.jdt.internal.junit5.runner.JUnit5TestLoader.<init>(JUnit5TestLoader.java:31)
    at java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
    at java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
    at java.base/java.lang.reflect.Constructor.newInstance(Unknown Source)
    at java.base/java.lang.Class.newInstance(Unknown Source)
    at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.createRawTestLoader(RemoteTestRunner.java:368)
    at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.createLoader(RemoteTestRunner.java:363)
    at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.defaultInit(RemoteTestRunner.java:307)
    at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.init(RemoteTestRunner.java:222)
    at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:206)
Caused by: java.lang.ClassNotFoundException: org.junit.platform.launcher.core.LauncherFactory
    at java.base/jdk.internal.loader.BuiltinClassLoader.loadClass(Unknown Source)
    at java.base/jdk.internal.loader.ClassLoaders$AppClassLoader.loadClass(Unknown Source)
    at java.base/java.lang.ClassLoader.loadClass(Unknown Source)
    ... 11 more

What I tried so far

I've already tried

  • to remove the test folder from build path and add it again.
  • to start the test with hovering over the method annotated with @Test and then click "Run as JUnit Test".
  • remove JUnit from Buildpath and add it again
  • restart eclipse
  • I've also moved the project whole project from one machine to another machine and tried it with the provided eclipse installation there
  • to rename the test method.
  • to retype the @Test annotation

Some of these steps can be found here, but in the end the problem remained.


回答1:


You ran into Eclipse bug 525948 which has already been fixed and which will be published in the upcoming release Oxygen.3 (4.7.3), March 21, 2018.

As workaround, put your test code in a separate project and add the project under test to the modulepath, but do not add a module-info.java to your test project. With your project, class and module naming, it should look something like this:

See also my video that shows Java 9 and JUnit 5 in Eclipse Oxygen.1a in action




回答2:


I have the same issue with STS 3.9.1. It seems like an Eclipse bug, however, to fix this you can add a test dependency junit-platform-launcher to your project (https://mvnrepository.com/artifact/org.junit.platform/junit-platform-launcher)

This is how I did for my project which uses gradle:

dependencies {
    // other stuff here

    testCompile group: 'org.junit.jupiter', name: 'junit-jupiter-engine', version: "5.${junit5MinorVersion}"
    testCompile group: 'org.junit.platform', name: 'junit-platform-launcher', version: "1.${junit5MinorVersion}"
}

gradle.properties file:

junit5MinorVersion=1.0

I believe the same applies if you see this exception while using IntelliJ IDEA.




回答3:


I fixed the issue by right clicking the test and selecting 'Run Configurations' and changing the "Test runner:" selection to 'JUnit 4' as shown here:

I ran the test again and it worked.




回答4:


Answers so far did not adress the problem of sharing code with other people who don't necessarily use Eclipse. Here is one proposition. The key is to use a maven profile to solve the Eclipse Case.

It assumes you have defined a property junit5.version in your pom like:

<properties>
    <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
    <junit5.version>5.1.1</junit5.version>
</properties>

then in the profiles section add the following:

<profiles>
    <profile>
        <id>eclipse</id>
        <dependencies>
            <dependency>
                <groupId>org.junit.jupiter</groupId>
                <artifactId>junit-jupiter-engine</artifactId>
            </dependency>
            <dependency>
                <groupId>org.junit.platform</groupId>
                <artifactId>junit-platform-launcher</artifactId>
            </dependency>
        </dependencies>
        <dependencyManagement>
            <dependencies>
                <dependency>
                    <groupId>org.junit.jupiter</groupId>
                    <artifactId>junit-jupiter-engine</artifactId>
                    <version>${junit5.version}</version>
                    <scope>test</scope>
                </dependency>
                <dependency>
                    <groupId>org.junit.platform</groupId>
                    <artifactId>junit-platform-launcher</artifactId>
                    <version>1.1.1</version>
                    <scope>test</scope>
                </dependency>
            </dependencies>
        </dependencyManagement>
    </profile>
</profiles>

All you have to do after this is to select the profile in your local Eclipse: Right click on your project and select Maven > Select Maven Profiles... (or hit Ctrl + Alt + P), and then check the "eclipse" profile we just created.

With that you are done. Your Eclipse will run Junit 5 tests as expected, but the configuration you added won't pollute other builds or other IDE




回答5:


In my case, the problem was myself and no IDE like Eclipse. I've imported the JUnit 4 Test class.

So do NOT import this one: 

import org.junit.Test  // JUnit 4

But DO import that one:

import org.junit.jupiter.api.Test // JUnit 5



回答6:


Following Andrii Karaivanskyi's answer here's the Maven POM declaration:

<properties>
    ...
    <junit-jupiter.version>5.2.0</junit-jupiter.version>
    <junit-platform.version>1.2.0</junit-platform.version>
    ...
</properties>

<dependencies>
    ...
    <dependency>
        <groupId>org.junit.jupiter</groupId>
        <artifactId>junit-jupiter-engine</artifactId>
        <version>${junit-jupiter.version}</version>
        <scope>test</scope>
    </dependency>
    <dependency>
        <groupId>org.junit.platform</groupId>
        <artifactId>junit-platform-launcher</artifactId>
        <version>${junit-platform.version}</version>
        <scope>test</scope>
    </dependency>
    ...
</dependencies>

UPDATE

As per comment by Alexander Wessel you can use org.junit:junit-bom as described in his answer to question Eclipse No tests found using JUnit 5 caused by NoClassDefFoundError for LauncherFactory.




回答7:


None of the solutions helped:

The problem is that Eclipse 2018-12 has support for JUnit 5.3.1. If you start it with a version before that, it will fail.

So make sure you use at least 5.3.1.

5.4.0 does work too.

In case your parent pom is Spring Boot, you need to make sure (in dependency management) that junit-jupiter-api is set to the same version. You don't need junit-platform-runner or -launcher!




回答8:


FYI, another cause of "No tests found using junit5" is (inadvertently or intentionally) declaring the test cases "private":

// Example of test case that doesn't get included
@Test
private void testSomeMethod() {
}

They need to be public.




回答9:


I got the same problem after creating a new TestCase: Eclipse -> New -> JUnit Test Case. It creates a class without access level modifier. I could solve the problem by just putting a public before the class keyword.




回答10:


Adding this maven dependency with JUnit Jupiter (v.5.5.1) solves the issue.

<dependency>
    <groupId>org.junit.platform</groupId>
    <artifactId>junit-platform-launcher</artifactId>
    <version>1.5.1</version>
    <scope>test</scope>
</dependency>



回答11:


Using STS 3.9.1 I got the same problem. However, currently I do not require any new JUnit5 features, so I tried to force using an older version. If using maven, you can add following dependencies to your pom.xml:

<dependency>
    <groupId>org.junit.platform</groupId>
    <artifactId>junit-platform-launcher</artifactId>
    <version>${junit.platform.version}</version>
    <scope>test</scope>
</dependency>

<dependency>
    <groupId>org.junit.jupiter</groupId>
    <artifactId>junit-jupiter-engine</artifactId>
    <version>${junit.jupiter.version}</version>
    <scope>test</scope>
</dependency>

<dependency>
    <groupId>org.junit.vintage</groupId>
    <artifactId>junit-vintage-engine</artifactId>
    <version>${junit.vintage.version}</version>
    <scope>test</scope>
</dependency>

This did the trick for me (at least as long as I do not need JUnit5 explicitly).




回答12:


Since it's not possible to post code blocks into comments here's the POM template I am using in projects requiring JUnit 5. This allows to build and "Run as JUnit Test" in Eclipse and building the project with plain Maven. 

<project
    xmlns="http://maven.apache.org/POM/4.0.0"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>

    <groupId>group</groupId>
    <artifactId>project</artifactId>
    <version>0.0.1-SNAPSHOT</version>
    <name>project name</name>

    <dependencyManagement>
      <dependencies>
        <dependency>
        <groupId>org.junit</groupId>
        <artifactId>junit-bom</artifactId>
        <version>5.3.1</version>
        <type>pom</type>
        <scope>import</scope>
        </dependency>
      </dependencies>
    </dependencyManagement>

    <dependencies>
      <dependency>
        <groupId>org.junit.jupiter</groupId>
        <artifactId>junit-jupiter-engine</artifactId>
        <scope>test</scope>
      </dependency>

      <dependency>
        <groupId>org.junit.platform</groupId>
        <artifactId>junit-platform-launcher</artifactId>
        <scope>test</scope>
      </dependency>

      <dependency>
        <!-- only required when using parameterized tests -->
        <groupId>org.junit.jupiter</groupId>
        <artifactId>junit-jupiter-params</artifactId>
        <scope>test</scope>
      </dependency>
    </dependencies>
</project>

You can see that now you only have to update the version in one place if you want to update JUnit. Also the platform version number does not need to appear (in a compatible version) anywhere in your POM, it's automatically managed via the junit-bom import.




回答13:


As everyone informed it's IDE bug, I tried in Eclipse and STS. In both the cases, it is failing.

As a workaround, I have fixed by modifying the pom.xml file like below.

I have added these two maven dependencies junit-jupiter-engine and junit-platform-launcher.

pom.xml

<!-- https://mvnrepository.com/artifact/org.junit.jupiter/junit-jupiter-engine -->
    <dependency>
        <groupId>org.junit.jupiter</groupId>
        <artifactId>junit-jupiter-engine</artifactId>
        <version>${junit-jupiter.version}</version>
        <scope>test</scope>
    </dependency>

    <!-- https://mvnrepository.com/artifact/org.junit.platform/junit-platform launcher -->
    <dependency>
        <groupId>org.junit.platform</groupId>
        <artifactId>junit-platform-launcher</artifactId>
        <version>${junit-platform.version}</version>
        <scope>test</scope>
    </dependency>
</dependencies>

Also please make sure to add the version of both the maven dependencies in the properties tag.

<properties>
    <java.version>1.8</java.version>
    <junit-jupiter.version>5.2.0</junit-jupiter.version>
    <junit-platform.version>1.2.0</junit-platform.version>
</properties>



回答14:


I am using eclipse 2019-09.

I had to update the junit-bom version to at least 5.4.0. I previously had 5.3.1 and that caused the same symptoms of the OP.

My config is now:

    <dependencyManagement>
        <dependencies>
            <dependency>
                <groupId>org.junit</groupId>
                <artifactId>junit-bom</artifactId>
                <version>5.5.2</version>
                <type>pom</type>
                <scope>import</scope>
            </dependency>
        </dependencies>
    </dependencyManagement>



回答15:


Same error i faced in eclipse version Oxygen.3a Release (4.7.3a) . There is issue in Maven Dependencies mismatch.To solve i have updated my Pom.xml with following dependecies.

http://maven.apache.org/xsd/maven-4.0.0.xsd"> 4.0.0 com.netapp.junitnmactiopractice JunitAndMactioPractice 0.0.1-SNAPSHOT

<properties>
    <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
    <java.version>1.8</java.version>
    <junit.jupiter.version>5.1.1</junit.jupiter.version>
    <junit.platform.version>1.1.1</junit.platform.version>
</properties>

<build>
    <plugins>
        <plugin>
            <artifactId>maven-compiler-plugin</artifactId>
            <version>3.1</version>
            <configuration>
                <source>${java.version}</source>
                <target>${java.version}</target>
            </configuration>
        </plugin>
    </plugins>
</build>

<dependencies>
    <dependency>
        <groupId>org.junit.jupiter</groupId>
        <artifactId>junit-jupiter-engine</artifactId>
        <version>${junit.jupiter.version}</version>
    </dependency>
    <dependency>
        <groupId>org.junit.platform</groupId>
        <artifactId>junit-platform-runner</artifactId>
        <version>${junit.platform.version}</version>
        <scope>test</scope>
    </dependency>
</dependencies>




回答16:


From the start the error message tell you that class is not found : NoClassDefFoundError that mean the PATH to junit is the problem.

  1. Press right click to project folder and choose Properties OR select project folder and press combination cmd + i.

  2. select from list "Java Build Path".

  3. select "Libraries" tab
  4. If JUnit 5(or JUnit 4) is added to "Modulepath", select the "JUnit 5" and press Remove.
  5. select "Classpath", press "Add Library...".
  6. from opened "Add Library" window, select JUnit, press next.
  7. Select JUnit library version that you need and press Finish.

That is all. Try to run test again.




回答17:


You can use only junit-jupiter as a test dependency instead of junit-jupiter-api, junit-platform-launcher, junit-jupiter-engine.

<dependency>
    <groupId>org.junit.jupiter</groupId>
    <artifactId>junit-jupiter</artifactId>
    <version>5.5.2</version>
    <scope>test</scope>
</dependency>



回答18:


you should change

@Test
public static void testmethod(){}

to 

@Test
public void testmethod(){}

the @Test is unsupport static method




回答19:


For me, I configured the build path to add JUnit 5 Library and also by adding the dependency 

     <dependency> 
        <groupId>org.junit.platform</groupId> 
        <artifactId>junit-platform-launcher</artifactId> 
        <version>1.1.0</version> 
        <scope>test</scope> 
     </dependency>

seperately.




回答20:


Add in your POM:

<dependencyManagement>
    <dependencies>
        <dependency>
            <groupId>org.junit</groupId>
            <artifactId>junit-bom</artifactId>
            <version>5.3.1</version>
            <type>pom</type>
            <scope>import</scope>
        </dependency>
    </dependencies>
</dependencyManagement>


来源：https://stackoverflow.com/questions/46717693/eclipse-no-tests-found-using-junit-5-caused-by-noclassdeffounderror-for-launcher

标签
java
eclipse
junit
java-9
junit5
易学教程内所有资源均来自网络或用户发布的内容，如有违反法律规定的内容欢迎反馈！
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!