Eclipse CDT project built but “Launch Failed. Binary Not Found”

Question

Windows 7, Eclipse CDT, Juno Service Release 2, Cross compiler.

Projects do compile executables generated, but Eclipse can\'t see them; therefore \'Run\' fails. Exec

Answer 1

On a Mac, If you also have a similar problem, as Nenad Bulatovic mentioned above, you need to change the Binary Parsers.

Press Command + I to open up properties (or right click on your project and select property)

Make sure you select Mach-O 64 Parser.

Answer 2

first i had to click a little arrow button that opens a menu containing "Run Configurations",

then in the following window, i had to click "C/C++ Application", followed by a textless button with a green + on it

then i had to press the "Apply" and "Run" button

and then eclipse could run/debug the program. :)

Answer 3

This happened to me and I found a solution, see if this works for you:

Once you have built your project with the hammer icon:

1. select "Run".
2. Run Configurations.
3. Choose "C++ Application".
4. Click on the "New Launch Configuration" icon on the top left of the open window.
5. Select "Browse" under the C/C++ Application.
6. Browse to the folder where you made your project initially.
7. Enter the Debug folder.
8. Click on the binary file with the same name as the project.
9. Select "OK".
10. Click "Apply" to confirm the link you just set.
11. Close that window.

Afterwards you should be able to run the project as much as you'd like.

Hopefully this works for you.

Answer 4

press ctrl +B and then You can use the Run button.

Answer 5

If you have a successful build, and getting a "Launch Binary not Found" Error. Try doing the following steps :

Click on Run -> Run Configuration -> C/C++ Application -> click on project_name debug -> click on browse and select your project file -> Press Ok -> below it Browse binary file ( Goto your Eclipse Workspace and select your project file -> You'll find two files 1.Debug 2.Src -> Click on Debug file -> Next click on the file with your project name and Press ok) -> then click apply and press run button.

This should solve the problem

Answer 6

My experience is that after building your project (CTRL+B), you need to create a run (or debug) configuration in the Run or Debug dropdown menu from the main toolbar. Then in the main page, click the

Search Project...

button.

This will find all executable files you have built and show them in a dialog box. You can choose the right one and then hit the Run (or