Speeding up element-wise array multiplication in python

Question

I have been playing around with numba and numexpr trying to speed up a simple element-wise matrix multiplication. I have not been able to get better results, they both are b

Answer 1

How are you doing your timings ?

The creation of your random array is taking up the overal part of your calculation, and if you include it in your timing you will hardly see any real difference in the results, however, if you create it up front you can actually compare the methods.

Here are my results, and I'm consistently seeing what you are seeing. numpy and numba give about the same results (with numba being a little bit faster.)

(I don't have numexpr available)

In [1]: import numpy as np
In [2]: from numba import autojit
In [3]: a=np.random.rand(10,5000000)

In [4]: %timeit multiplication1 = np.multiply(a,a)
10 loops, best of 3: 90 ms per loop

In [5]: # numba

In [6]: def multiplix(X,Y):
   ...:         M = X.shape[0]
   ...:         N = X.shape[1]
   ...:         D = np.empty((M, N), dtype=np.float)
   ...:         for i in range(M):
   ...:                 for j in range(N):
   ...:                         D[i,j] = X[i, j] * Y[i, j]
   ...:         return D
   ...:         

In [7]: mul = autojit(multiplix)

In [26]: %timeit multiplication1 = np.multiply(a,a)
10 loops, best of 3: 182 ms per loop

In [27]: %timeit multiplication1 = np.multiply(a,a)
10 loops, best of 3: 185 ms per loop

In [28]: %timeit multiplication1 = np.multiply(a,a)
10 loops, best of 3: 181 ms per loop

In [29]: %timeit multiplication2 = mul(a,a)
10 loops, best of 3: 179 ms per loop

In [30]: %timeit multiplication2 = mul(a,a)
10 loops, best of 3: 180 ms per loop

In [31]: %timeit multiplication2 = mul(a,a)
10 loops, best of 3: 178 ms per loop

Update: I used the latest version of numba, just compiled it from source: '0.11.0-3-gea20d11-dirty'

I tested this with the default numpy in Fedora 19, '1.7.1' and numpy '1.6.1' compiled from source, linked against:

Update3 My earlier results were of course incorrect, I had return D in the inner loop, so skipping 90% of the calculations.

This provides more evidence for ali_m's assumption that it is really hard to do better than the already very optimized c code.

However, if you are trying to do something more complicated, e.g.,

np.sqrt(((X[:, None, :] - X) ** 2).sum(-1))

I can reproduce the figures Jake Vanderplas get's:

In [14]: %timeit pairwise_numba(X)
10000 loops, best of 3: 92.6 us per loop

In [15]: %timeit pairwise_numpy(X)
1000 loops, best of 3: 662 us per loop

So it seems you are doing something that has been so far optimized by numpy it is hard to do any better.

Answer 2

use a GPU. use the following package.

gnumpy

Answer 3

The speed of np.multiply heavily relies on the arrays beeing exactly the same size.

a = np.random.rand(80000,1)
b = np.random.rand(80000,1)

c = np.multiply(a, b)

is fast as hell whereas the following code takes more than a minute and uses up all my 16 GB of ram:

a = np.squeeze(np.random.rand(80000,1))
b = np.random.rand(80000,1)

c = np.multiply(a, b)

So my advice would be to use arrays of exactly the same dimensions. Hope this is useful for someone looking how to speed up element-wise multiplication.

Answer 4

What about using fortran and ctypes?

elementwise.F90:

subroutine elementwise( a, b, c, M, N ) bind(c, name='elementwise')
  use iso_c_binding, only: c_float, c_int

  integer(c_int),intent(in) :: M, N
  real(c_float), intent(in) :: a(M, N), b(M, N)
  real(c_float), intent(out):: c(M, N)

  integer :: i,j

  forall (i=1:M,j=1:N)
    c(i,j) = a(i,j) * b(i,j)
  end forall

end subroutine 

elementwise.py:

from ctypes import CDLL, POINTER, c_int, c_float
import numpy as np
import time

fortran = CDLL('./elementwise.so')
fortran.elementwise.argtypes = [ POINTER(c_float), 
                                 POINTER(c_float), 
                                 POINTER(c_float),
                                 POINTER(c_int),
                                 POINTER(c_int) ]

# Setup    
M=10
N=5000000

a = np.empty((M,N), dtype=c_float)
b = np.empty((M,N), dtype=c_float)
c = np.empty((M,N), dtype=c_float)

a[:] = np.random.rand(M,N)
b[:] = np.random.rand(M,N)


# Fortran call
start = time.time()
fortran.elementwise( a.ctypes.data_as(POINTER(c_float)), 
                     b.ctypes.data_as(POINTER(c_float)), 
                     c.ctypes.data_as(POINTER(c_float)), 
                     c_int(M), c_int(N) )
stop = time.time()
print 'Fortran took ',stop - start,'seconds'

# Numpy
start = time.time()
c = np.multiply(a,b)
stop = time.time()
print 'Numpy took ',stop - start,'seconds'

I compiled the Fortran file using

gfortran -O3 -funroll-loops -ffast-math -floop-strip-mine -shared -fPIC \
         -o elementwise.so elementwise.F90

The output yields a speed-up of ~10%:

 $ python elementwise.py 
Fortran took  0.213667869568 seconds
Numpy took  0.230120897293 seconds
 $ python elementwise.py 
Fortran took  0.209784984589 seconds
Numpy took  0.231616973877 seconds
 $ python elementwise.py 
Fortran took  0.214708089828 seconds
Numpy took  0.25369310379 seconds

Answer 5

Edit: nevermind this answer, I'm wrong (see comment below).

---

I'm afraid it will be very, very hard to have a faster matrix multiplication in python than by using numpy's. NumPy usually uses internal fortran libraries like ATLAS/LAPACK that are very very well optimized.

To check if your version of NumPy was built with LAPACK support: open a terminal, go to your Python install directory and type:

for f in `find lib/python2.7/site-packages/numpy/* -name \*.so`; do echo $f; ldd $f;echo "\n";done | grep lapack

Note that the path can vary depending on your python version. If you some lines get printed, you surely have LAPACK support... so having faster matrix multiplication on a single core will be very hard to achieve.

Now I don't know about using multiple cores to perform matrix multiplication, so you might want to look into that (see ali_m's comment).