iOS app testing. App installation failed. No code signature found [closed]

Answer 1

It is clear you do not have the developer and the distribution profile set for the devices you are trying to install the app.

Answer 2

If "code sign on copy" fails, then check if you are modifying the frameworks in a run script after the "Embed Frameworks" phase.

If you are, then move the Run script to a position before the "Embed Frameworks" phase.

Answer 3

Folks, My problem's Root cause was modifications that were done by iOSOpenDev installer. I did restore the original plist file that was backed up by the installer. that solved my problem you need to look into the SDK directory to see if something funky has happened. at least one more option to try.

/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS<SDK version>.sdk/

example:

/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS11.4.sdk/

by default code signing must be turned on, if that is turned off then something funky happened. (for ref See Alok's answer below)
If nothing works. My recommendation would be to delete and reinstall Xcode as this error would not arise in the normal scenarios. So resetting Xcode can greatly reduce troubleshooting time.

Answer 4

Tried everything here and nothing worked except restarting my device.

Answer 5

In my case, I have created an unsigned IPA file and for this i had made some changes in SDKSetting.plist file (changed CODE_SIGNING_REQUIRED = NO) and it should be always YES if you are running application on the device.

To resolve this follow the below steps: Steps to create unsigned IPA (Tested on Xcode 9.4.1)

Step 1: Open finder > Go to Folder.. as below screen

and then copy and past the below line:

/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS*.*.sdk/SDKSettings.plist

Open iPhoneOS.sdk as showing in below image:

Step 2: Copy the SDKSettings plist in another folder because you can't make changes here:

Step 3: Make the change in duplicate

set CODE_SIGNING_REQUIRED to YES

Step 4: Now replace duplicate Plist with the original one (Both names must be the same). This will also ask admin permission to change.

********************************OR**************************************

If you will update your Xcode then the problem will also disappear because updated xcode will come with default SDKSetting.plist

Answer 6

I have some issues during App upload to the Appstore then i Add Some Code in Build Phase -> Run Script

done I clean Build folder and remove t above code from Run Script And Build again and run on my Iphone it work fine

You can remove the code of run script or check the check box of ."Run script only when installing " then also it will work